Butée d'arrêt électrique (Partie 2) pour Tour SIEG SC4 - (Carriage Lock for SC4 lathe - Part 2)
Dans cette 2ème partie, on verra la réalisation du T de serrage ainsi que l'usinage, sur le tour SC4, de la vis de blocage. On pourra voir la totalité des pièces mécaniques qui se fixeront sur la glissière du tour. ... https://www.youtube.com/watch?v=dKXEbxWeOGc
7ème et avant dernière partie de l'usinage d'une butée d'arrêt de broche (électrique).
Réalisation de la vis de serrage et montage de l'ensemble, puis test de positionnement sur le tour SC4.
...
https://www.youtube.com/watch?v=icyzAmtD0tw
Première vidéo de la mise en place du prototype de la motorisation de la tête de la fraiseuse SX3 de Sieg (axe Z).
First video of the implementation of the prototype of motorisation of the Sieg SX3 milling machine head (Z axis).
Moteur Nema 23 4.2A - 3Nm.
...
https://www.youtube.com/watch?v=sH3h2T84XZA
C'est le tout premier essai avec l'Arduino Uno (R3).
J'ai des petits projets, mais pour l'instant je commence tout petit :)
C'est ma première guirlande de Noël et comme nous sommes en janvier, j'ai du temps pour la mettre au point :)
...
https://www.youtube.com/watch?v=3iWCeQKi6zk
Ceci est le projet de numérisation d'un plateau diviseur VERTEX.
A savoir qu'un degré sur le VERTEX correspond à 1 tour de manivelle donc dans mon projet évidemment 1 tour du moteur.
A ce jour, il me reste à faire la carte CI et l'usinage du support.
Il afut dire que le plus dur est fait et que ça fonctionne parfaitement.
...
https://www.youtube.com/watch?v=sFRlKP2XApM
Voilà une petite vidéo avec la musique de l'incommensurable Mario Bros et un accompagnement avec une LED 3 couleurs (bleue rouge et verte)
...
https://www.youtube.com/watch?v=_NLsOvkaQl8
Bonjour,
Voilà la réalisation d'un système couplé avec un microcontrôleur CH341 (Arduino nano) et un écran tactile Nextion pour la gestion de l'interface. Ce système permet la motorisation de l'axe Z de ma Fraiseuse SX3 de chez SIEG.
Hello,
Hello,
This is the realization of a system coupled with a CH341 microcontroller (Arduino nano) and Nextion touchscreen for the management of the interface. This system allows the motorization of the Z axis of my SX3 milling machine from SIEG.
...
https://www.youtube.com/watch?v=EjxW9tZ9vGI
Bonjour,
Suite à la précédente vidéo voilà ce système (Arduino-Nextion) en fonctionnement sur ma Fraiseuse SX3.
Les premiers tests sont concluants et en attendant je travaille avec et ce n'est que du bonheur.
- Usinage du support et perçage du bâti pour la fixation
- Moteur Nema 23 4.2 A 3Nm
- Driver TB6600 HY-DIV268N 5A
- Microcontrôleur Nano 8Mhz
- Écran Nextion 3.2" (8,10 cm)
Fonction :
- Montée et descente tour à tour comme à la manivelle (volant)
- Montée et descente par paliers (10mm - 40mm et 80mm)
- Mémorisation de la dernière position et de la position en cours, en cas d'arrêt d'urgence possibilité de continuer la course ou de revenir à la dernière position
- Démarrage progressif et arrêt régressif pour éviter les à-coups sur la mécanique.
...
https://www.youtube.com/watch?v=zw9TDKUT_gA