MTK600E high-performance automatic saw for aluminium automotive and industrial profiles mecanicacnc High-performance automatic saw for aluminum and non-ferrous metals. Fully automatic operation. Use of carbide-tipped or PCD saw blades Ø 600 mm, smaller diameters available in special versions. Saw blade speed infinitely adjustable. Saw blade direct drive 18.5 KW, 400 V, 50 Hz infinitely variable. Material and saw blade feed via ball screw drive with servo motor. 3 axis CNC control computer with touch screen. Large cutting area 205 x 400 mm. Section lengths from 3.5 mm. Remnants from 130 mm, depending on the profile. Protective hood opens pneumatically upwards. Motorized material feed unit, feed lengths from 3.5 - 1,000 mm with ball screw drive and servo motor. 5-fold reversal possible, thus section lengths up to 7,000 mm. Floating feed slide. Feed carriage with lifting/lowering function when the profile is fed, the carriage is raised and lowered when it is gripped. Pneumatic profile clamping vertically and horizontally, with rail adjustment via handwheel. Clamping pressure reduction with 6 pressure regulators. Rail guide with carriage for horizontal and vertical profile clamping. Changeable pressure pads with plastic pads. Table covers with exchangeable plastic plates. Saw feed from the back to the front above the table top, resulting in very good removal of the sawdust. Pneumatic profile clamping vertically and horizontally on the left and right of the saw blade. Changeable thrust pads with plastic pad. Widening of the cutting gap on both sides. Table covers with exchangeable plastic plates. ... https://www.youtube.com/watch?v=C5cy93PTOvg