This is a one piece rail and see-through mount for the Mac n Cheese with a MasterPiece Arms Upper also should help with fitment between upper and lower.
This is a modified DB alloy it requires an extra roll pin and 1/3 of a bed leveling spring .Measurements were based off a MasterPiece Arms Mac upper also I recommend printing with regular supports touching build plate only.
This is a collection of files to help tune a Hawk DLX. Make sure to read PDF before messing with the ECU. After downloading the ECU HUD application move the tuning shortcut and the flash memory shortcut to the desktop then move the tuned Hawk WML file into tuning and the stock hawk BIN file into flash memory.
AR lower for a BCA side charger to make your rifle feel more like an AK.You will need a printer able to print at least 350mm in one of the axis also 1 6/32 Bolt to use as a buffer retainer also make sure inside of the buffer tube is smooth you may need to sand/Build plate support is all that is needed for the lower.also read the pdf's being this is a mix of other people's files and remixes too.
AR-15 Rifle and Pistol lowers that combine the receiver and buffer tube. They require one 6/32 Bolt cut to size for the buffer retainer also a printer able to print 350 mm in the Z axis.Read included PDF.
This is a key for the ignition cover on cg250 and gy6 bikes . You will need to press in 3 mm x 2 mm magnets matching the same polarity that your existing key has.