Linky to this stage of the team cup 2015 http://oc-esports.io/#!/round/team_cup_2015_sc1/2215/cinebench_r15_lga775
Linky to final score http://hwbot.org/submission/2971153_jumper118_cinebench___r15_core_2_qx9650_(3.00ghz)_539_cb
PC Specs:
Cooler: Little Devil Custom Rotary Single Stage Phase
CPU: Core 2 Quad QX9650 (C0 stepping)
Board: Asus P5Q Deluxe
Ram: 2X2GB G.Skill PI F2-8800CL5D-4GBPI 1100Mhz CL5-5-5-15
GPU: EVGA Geforce GT610 2GB
SSD: Samsung 840 120GB
PSU: Corsair CX500M
...
https://www.youtube.com/watch?v=oGVHbo7basQ
In this video i test the Ryzen 5 5600X in cinebench 11.5,R15 and R20 with the cpu under water at 4.85ghz on 1.35v, as well as other benchmarks.
https://valid.x86.fr/f0pzvm :P
...
https://www.youtube.com/watch?v=fBJFZGBIdG4
All those super clean setups you see pics of are a lie. this is what a proper setup that is used on a daily basis looks like..........
...
https://www.youtube.com/watch?v=VuYjRpTpGcM
Test System Spec:
AMD Ryzen 9 3900X
Asus Crosshair VIII Hero
Patriot Viper Steel 4400C19
AMD Radeon Pro Duo
Integral 120GB SSD
Super Flower Leadex 1300W
Water Cooling:
EK supremacy evo
XSPC Radeon Pro Duo Full cover water block
Watercool MO RA 360LT
Fans are like from a corsair H100 SP120 grey fans.
9 way fan splitter its 1x molex to 9x 3 pins.
...
https://www.youtube.com/watch?v=znQTzdXL-aI
The second part of my 775 Modding adventure. I have received the stickers from the USA and show how to put the sticker on and so the first test of the modded socket and cpu. I was very nervous, but i booted first time, so i am pleased with the result.
...
https://www.youtube.com/watch?v=Znmv3ZRCtec
As you will have seen in my previous video, i have got a new board now as the gigabyte one was terrible. With the old board i could do a maxiumum of 4.8ghz and the cpu was not even peaking on air cooling. The MSI Z490 Unify is well worth the extra. It can now do 5.1ghz no problem on water cooling.
This is below average for a 10900K, but this is expect being a very early ES chip.
The only issues i've had with the setup is when i go over 3600mhz on the memory the pc will not restart correctly. This happens on the bios it shipped with and the newest bios, which i have now installed. This also happened on the gigabyte board too.
PC Spec:
Intel QTB2 3.3ghz 10c/20T Unlocked CPU
MSI Z490 Unify
Patriot Viper Steel 2*8gb 4400C19
MSI RTX 2080Ti Trio X
Super flower 1300W PSU
some SSD
...
https://www.youtube.com/watch?v=UEm46JtlgTo
I was having some issues on the last few runs where the ESC was hitting thermal shutdown of 105C before it reached LVC, I think this has been down to my usual battery which is a Gens Ace Basher 5.2AH 40C pack having a higher resistance than before. For this runs today, i have used 2 Turnigy Heavy Duty 5AH 60C packs.
I also thought I'd try out some 1/8th scale buggy wheels from the Xray for this run, but i didnt really like the handling of the truck with them on. It has miles less control in the air and much less traction on the ground. The narrower stance also meant it flipped over way more than usual.
Spec:
...
https://www.youtube.com/watch?v=tS0hNK19bTM
I broke the front input gear a while ago, so i thought i'd finish it off 2WD in style.
Specs
CPE TVP chassis
SS short wheelbase link kit with Erevo rod ends
MIP drive shafts
SSD Steel Transmission Gears
Axial Machine 14/36 overdrive gears
Hobbywing 3300KV 3652 SL Motor
Hobbywing Max10 60A ESC
16T pinion
56T Spur
SS Steering linkage
Bluebird BLS 2905 Steering Servo
Chinese metal rear axle
Steel tubes in front axle
2S Turnigy Nanotech 5.6AH hardcase 2S2P 50-100C
...
https://www.youtube.com/watch?v=gboRNKCMuMc