Let start by saying things never work as planned. 1. 3D Printer failed resin leak onto curing screen that's a no no. baked on to the screen was unable to scrap off no I have a none working 3D printer waiting on support for help. 2. Walthers turntable lost all service track settings do not under stand why that was. Easy enough to reset you think well not sound A the turntable is making a strange noise when moving and B Unable to set the service tracks getting error E3 Bridge not responding Sent email to support Fixed one thing this weekend my Panels for the push buttons that control the turnout had on push button wires crossed and shorted out the bus line Took two days to figure that one out but now all are working. ... https://www.youtube.com/watch?v=0AFADjVEtdk

Several Shipments came in today you can see them all I already unboxed them we seen many unboxings on here. ... https://www.youtube.com/watch?v=T69ILo6hWWM

... https://www.youtube.com/watch?v=HEDTmTdz1Mw

A Shoutout to Derail Darrel, Jason The Train Freak and George from Soundtrax Also to all who commented on my previous video. It all boiled down to a wiring issue Had the Tortoise machines pins 6 and 7 were connected to the wrong bus line. Had to run my bus lines for those two main lines to that side of the layout and connect the tortoise machines to them. Now working The Well car problem was a section of track that the Well car was dropping off the rail adjusted the track now they are running also. ... https://www.youtube.com/watch?v=PzvbAWivxdk