Yeah, this isn't very interesting, but some people wanted to see it, and after quite a few months of having this sitting on my computer, I figured I should upload it. I'm really sorry about losing the final blow, I don't know exactly what happened, but I can assume that when I cleaned my computer form the 500GB of stuff left over from the previous timelapse that I accidentally deleted something.
DISCLAIMER: If you push your camera too far, there is a slight (.01%) chance that you could permanently damage your equipment. Always stay within reason.
In this video, I show you how to use the CHDK firmware extension to push your camera's photo taking capabilities to it's limits. I show you how to override the photographic features of your camera, such as the shutter speed and ISO, so that you can get the perfect shot. As always, experiment with your camera. Some cameras accept a long exposures better than others, so I wouldn't recommend going straight to a 10 min. exposure. Test it out with your equipment to find out what works best for you.
Some info.:
-any override aperture value will work
-Any shutter speed value will work (even the 1/100k)
-exposures over 300 seconds may cause random white pixels to appear in your image.
-For long exposures, the time it takes to take a photo is twice that of the exposure time. Ex: A 100 second exposure takes 100 seconds to take and another 100 seconds to process for a total of 200 seconds of unusable time.
-Any ISO value that is less than or equal to your camera's max ISO will work. (any higher and your camera will crash, but it should re-boot without ill effects.)
-ISO values less than 80-60 will be treated by your camera as ISO 80-60. (values vary with camera model).
-Don't be stupid and do a 10 min. exposure at f/2.7 ISO 3200 in broad daylight. You might fry something in your camera.
And as always, use common sense!
LINKS TO STUFF:
-CHDK Download page: http://mighty-hoernsche.de/
-How to install CHDK: http://www.youtube.com/watch?v=Deas7JX1qZM
...
https://www.youtube.com/watch?v=2Hv4AEACYA8
In this video, I show you what the video straight out of the camera looks like in very low light. I also highlight how good the built-in mic is. The "static" noise that you hear however isn't the camera or mic, but the sound of the snow hitting things, as it was snowing quite a bit. It was about 6:00pm, on a very cloudy late December day, so there wasn't much light for me to work with. The part in the beginning, the light was only a small 40-60W incandescent bulb. (headphones will help!) All done handheld.
Filmed at 1080p, which allows for great detail, but not so good low-light performance
720p version: http://youtu.be/PAVi6_fImrI
480p version: http://youtu.be/doxmU3dpxtY
...
https://www.youtube.com/watch?v=DQo_nsZDT1k
In which I discuss the similarities and differences between the SX40 (released in 2011) and the SX50 (2012) bridge cameras by Canon. Both are very capable cameras, with the same video capabilities, manual mode, and picture quality. Now for some things I missed:
SX50 ($370) specs : http://www.usa.canon.com/cusa/consumer/products/cameras/digital_cameras/powershot_sx50_hs#Specifications
SX40 ($319)specs: http://www.usa.canon.com/cusa/support/consumer/digital_cameras/other_powershot/powershot_sx40_hs#Specifications
######- SX50 HAS RAW CAPABILITIES by default. (CHDK is helpful for the SX40)
-SX50 has a lot more zoom noise in video, which is strange because the lens sound is quieter than the SX40. (I forgot to edit it in.)
-The flash of the SX50 doesn't automatically pop-up, but now the flash is covered on the front, which means that the flash can only be raised from the side.
-Video quality of the 2 cameras seem exactly the same, as I had these two cameras, but no way of recording the 2 cameras simultaneously. (I had to film with either the SX40 or the SX50, so whenever the SX40 is on screen, the SX50 is filming, and vice versa.)
Let me know what you think about this video, and also tell me about anything I missed with the SX50. (But if the things are false, I will correct! :)
...
https://www.youtube.com/watch?v=23JteKYNgxs
In this episode, I get distracted about the history of Nintendo. I also fail because of it. I hope you can endure!
...
https://www.youtube.com/watch?v=tbfIJzQWeZs
I remixed the song from the second level of BattleToads, and this is what it sounds like. I hope you enjoy this!
...
https://www.youtube.com/watch?v=iwD6WnCEW8g
In which I test out an amplifier IC that I bought through Ebay. This 14 pin SIP can output 10 watts per channel if given the right amount of voltage. Currently, only about 4W of power is going through the speaker, as I'm only giving it 12 volts. I plan to use the second channel as a second amp to bridge together to give 8W of mono power! Also, this is a 4" driver that I scrapped from an old TV. Let me know if you have any questions.
Datasheet: http://pdf1.alldatasheet.com/datasheet-pdf/view/40084/SANYO/LA4280.html
...
https://www.youtube.com/watch?v=atNq_DMVGqg
In which I show you the process I went through to make DIY enamel-looking pin badges with cheap materials. Usually enamel pin badges require expensive machines and a large minimum order quantity, but if you can make them at home, you can make small batches that look pretty good!
Chapters:
0:00 Introduction
0:16 Artwork
1:22 3D Model
3:27 3D Print
5:32 Paint
6:32 Casting
The dragon artwork was originally a piece by Notidee on twitter! They make pretty cool art, check them out: https://twitter.com/Notideeart
For thinning the 2 part epoxy, in a 40ml batch, I found that 3ml of 100% isopropyl alcohol worked the best for diluting it. Usually I just mix the resin, then add the thinning agent until it's slightly more viscous than water. As mentioned in the video, do not do this if you intend on using the epoxy for structural applications.
The dyes are simple alcohol dyes made specifically for 2 part epoxies. I recommend finding opaque pigments instead, as the results I got from the transparent dyes ended up looking like candy.
If you have questions or suggestions, feel free to let me know in the comments section, because I read pretty much every comment.
Don't forget to leave a rating on the video, as it helps me out a lot.
Website: http://Lazerlord.com
Twitter: https://twitter.com/Lazerlord10
Thingiverse: https://www.thingiverse.com/Lazerlord/about
...
https://www.youtube.com/watch?v=UzPJjNE-bDI
In this video, I review and test the audio quality of my new microphone, the Pyle PDMIC58. For $13, I am amazed, and would rate this product 5 stars. The tone test in the video wasn't very accurate, as my recording software messed up the tones, but if you turn up the volume you can hear it better.
Pros:
-all metal construction
-good sound quality
-price
-very directional
-low amount of background noise
Cons:
-didn't come with a mount
-10 ft. cord can get annoying
-not "amazing" sound quality
Buy it here: http://www.amazon.com/Pyle-Pro-PDMIC58-Professional-Handheld-Microphone/dp/B003GEBGA0/ref=sr_1_fkmr0_1?ie=UTF8&qid=1350527724&sr=8-1-fkmr0&keywords=
...
https://www.youtube.com/watch?v=lHbEkh27bSY