hello
here is game 8 from logical chess move by move by irving chernev
the game focuses on the colle system
...
https://www.youtube.com/watch?v=4QbhsIvR54A
hello,
i bought some new h7 bulbs for my headlights to pass the mot as the beam pattern was not visible. these the the bulbs, in the lamp holder. i had cleaned the lenses as a part of the mot failure. they are much better now compared to before when you could not actually see anything inside. here you can see the bulb and condition of the reflectors on both sides. i would say the reflectors are in good condition. although, the bulbs look as though light may be passing through the black painted tip. i did pay £3.50 for both, so either the batch is faulty or just cheap and nasty in general. i have bought bulbs from eurocarparts before and had no problem.
...
https://www.youtube.com/watch?v=oSIJoElhWKQ
Hello,
I have a stratocaster that has high frets which causes fret buzz. After looking at some of the videos on youtube I thought that I would give this a go. I bought the notched level off ebay from here,
http://www.ebay.co.uk/itm/UK-BASED-FENDER-GUITAR-NECK-STRAIGHT-EDGE-Notched-LUTHIERS-TOOL-Fits-Many-Makes-/252713776748?hash=item3ad6ea366c:g:4G0AAOSwImRYcNzl
Next I am going to find the high frets with a straight edge, mark them and take them down.
...
https://www.youtube.com/watch?v=2l44HTOCJGQ
hello
here is the vivitar spotting scope that I have on ebay at the moment. I don't know much about them. this is in good condition
...
https://www.youtube.com/watch?v=6_VISszH3l0
i made up a piece of fibre glass from unidirectional 50mm wide 600g tape using epoxy. the epoxy has small bubbles and seems to crack. not sure if this is ok or faulty in some way.
...
https://www.youtube.com/watch?v=w0YXB-AfAQY
Hello,
I like this part of the movie because it involves steeling a car and the method they use is quite interesting. I am not too sure what tools they are using and I have tried to find out. I think that the idea is not to damage the car in any way. The guy who is doing the work removes the cover of the ignition tumbler and inserts what I think is a force-tool which is designed to break through a sidebar on the lock. Then after removing the original tumbler inserts his own which he has a key for.
...
https://www.youtube.com/watch?v=5t6cdGBr9HE