Where I am squatting there are rows of Asparagus growing. No they are not invisible, but just underground. The crowns underneath the soil are waiting warmer temperatures to arrive and then I should be getting little sticks poking above the surface. These are known as perennials as they come back every year. And I hope after a few years of them growing, dying back and growing again I will be able to harvest their tasty greens. Though I must wait a few years to have the crowns underground get enough strength to allow me to harvest some.
So for now I will just let them grow out and do their thing, but in a few years I hope to eat them. Eventually where I am standing will just be a large patch of fern like growth and I would not even be visible when they are fully mature. But they have a long way to go. Last year the Asparagus stalks grew to just a few feet tall, but if they keep at it they should eventually reach seven feet tall! Thats taller than me and I am really looking forward to having such a large edible plant in my garden.
Asparagus has some special needs before planting, such as digging rows to allow horizontal growth of its roots. Also, its important to soak them before placing in the ground. I failed do to the later and may have suffered some failure from the crowns. I planted close to a hundred of them but only got maybe 20-30 of them to come up. So taking time to prep them is very important if you want a successful outcome with these crowns.
The appearance of the stalks is quite interesting, at first they grow just like the stalks you see sold at supermarkets. But then if not picked they will grow out fern like fronds. They are very small and the flowers produced are even smaller, barely can be seen unless you are right next to them.
It may be a few months until I see them emerge from the ground, but I am pretty sure they are alive down there. Since last year was the first time for me growing them I do not know what to expect. But when they come up I will make another video to give an update on the situation.
These solitary bee homes are made from 2x4's and long wood screws. Once all assembled, all that needs to be done is have a bunch of holes drilled into it for the Mason bees to use. I built a few dozen for project and set my camera to do a mix of video lapse and normal 1080p video. I added some music to it since the video lapse is lacking any sound. And I uploaded it to LBRY with the music so there wont be any issues.
Arriving at one of the space stations some hostile spaceships try to get to me before I can land. Though they do not succeed as I enter the docking area. I hang out in the bay for a few minutes waiting for them to pass.
https://i.postimg.cc/j2dCYTyp/vlcsnap-2021-03-07-11h57m17s104.png
When I leave the space station they are waiting for me, so my plan is to quickly make it to the surface of the planet. I fly through a field of rocks before the planets atmosphere is reached.
https://i.postimg.cc/y8SxHvS8/vlcsnap-2021-03-07-11h58m24s685.png
Following "Strangers Coordinates" I go through the atmosphere and left right by the marker. The sun is starting to set on the planet giving the clouds and sky a colorful look to it.
https://i.postimg.cc/BQbthqSD/vlcsnap-2021-03-07-11h59m13s160.png
I check out the containers as the base is deserted. There is also a space ship there I can claim as well, but its pretty broken and wont fly very far much outside of the planet.
https://i.postimg.cc/VLhvp3vh/vlcsnap-2021-03-07-12h00m34s000.png
Collecting some materials to at least fix one of the broken machines at this outpost. As the sun goes down I work in the dark to set up a refiner to make "pure ferrite" to make the repair.
https://i.postimg.cc/d020736M/vlcsnap-2021-03-07-12h03m21s572.png
The refiner will take many raw materials and convert them into new materials. I need to use this to convert the ferrite to pure ferrite. I need to provide the machine with carbon to make it convert materials.
I was surprised to be getting cooked on this planet after the sun has gone down. Taking cover in my ship I use my new materials to manage my inventory. Moving my items between the spacesuit and the spaceship to free up slots.
https://i.postimg.cc/ryQKCdkM/vlcsnap-2021-03-07-12h05m09s266.png
There were a bunch of unidentified rocks on this planet as well, so I took a little time and scanned them to earn credits. I think it also gives me extra minerals when I ID it but maybe im wrong.. not sure, but I try to always scan with the tool to get more credits.
Solominer Presents:| No Mans Sky |
-|-|
Year | 2016
Genre | Survival
Console | PC
Platform | Windows 10
Rig specs:| Main gaming setup |
-|-|
Processor | Ryzen 7 1700 Eight Core overclocked to 3.7 Ghz
Memory | Corsair DDR4 32GB overclocked to 3066 XMP 16-17-17-35 1T
Video Cards | 2x Gigabyte G1 1080 no overclock
Power Supply | Corsair 1000W
---
Coin | Address
-|-
BTC: |bc1qhfmvd2gywg4fvrgy2kkkkyqta0g86whkt7j8r7|
LTC: |ltc1qdyzm5cwgt8e2373prx67yye6y9ewk0l8jf3ys9|
DASH: |XkSqR5DxQL3wy4kNbjqDbgbMYNih3a7ZcM|
ETH: |0x045f409dAe14338669730078201888636B047DC3|
DOGE: |DSoekC21AKSZHAcV9vqR8yYefrh8XcX92Z|
Please leave a comment if you have any feedback about this presentation. This is my first one for bees and hope to make more about certain details of raising them.
Check out my other post about an intro into mason bees as I read the presentation and discuss in more detail about these solitary bees.
Doing a truck race, I look at my options for what to use. Forza Horizon has many options so I take a few minutes and consider my options. I settle on a Dodge Ram pickup. I get a pretty bad start off the line but quickly catch up at the hole shot. I make my way up positions and pass first within a minute. Sometimes it takes me awhile and other times I can pass pretty easy. But with 50% of the map to go, the faster trucks in the back will catch up and make it harder for me to hold my lead. As my truck gets damaged by the jumping and hitting things it starts to lose power, and by the end of the race I can find myself getting passed due to engine damage.
Luckily ive got a nice gap in the lead so it does not look like that will happen. And I finish the race in 1st.
I take the Dodge Rebel TRX to the next location and quickly over judge a turn and fly into an embankment.
I just barely touch the side of a car on my way to the lakeside sprint. Using my car I started with I race again with it later on. That AWD off the line gives me the edge, and hopefully in the snow it will as well. I quickly find myself in first within the first thirty seconds. Maybe I should adjust the driver difficulty. Sometimes the race can be hard, other times I get in the lead right away and then just keep making the gap bigger. Doing 150 MPH on the snow is pretty wild, crossing the finish line at 152 MPH.
I take the Audi after the race, and find a jump near by to do. After that I make my way to the next event.
Playing on the map Livonia its a mix of forests and hills, alot of plant cover on this map. Using the eden editor I find a good place to set up to armies to fight. I cycle through the towns until I find one I like.
Dolnik is the town I settle on, it has a large hill next to it and will make for some interesting battles. I deploy some motorized infantry and re-enforcements. I also spawn in some unmanned ground vehicles.
On the other side I add a bunch of infantry in between the buildings. I spawn in and enjoy how the battle plays out, though my computer has trouble handling the raw amount of things going on in this game. I had to go into the settings and turn some things down. Using my rocket weapon but I realize I equipped an anti air rocket and failed to hit anything on the ground.
I change teams and spawn in some unmanned aircraft. I am hoping they will relay the enemies position having them fly overhead. They did not seem to do what I wanted and I also did not see them engage anyone. Using another drone I crash it as soon as I launch it.. haha
This game and a few others I emulate really hit my computer the hardest. I hear its because Arma 3 is not very optimized, causing the computer to have to work much harder than it should need to. Sorry if the video is a little choppy when it comes to Arma but my FPS really takes a beating.
Its all updated and so are my graphics cards, and if I add to many vehicles and soldiers it will stall the game completely. So I find myself having to use smaller engagements
Solominer Presents:| Arma 3: Old man |
-|-|
Year | 2013
Genre | First Person Shooter
Console | PC
Platform | Windows 10
Rig specs:| Main gaming setup |
-|-|
Processor | Ryzen 7 1700 Eight Core overclocked to 3.7 Ghz
Memory | Corsair DDR4 32GB overclocked to 3066 XMP 16-17-17-35 1T
Video Cards | 2x Gigabyte G1 1080 no overclock
Power Supply | Corsair 1000W
---
Coin | Address
-|-
BTC: |bc1qhfmvd2gywg4fvrgy2kkkkyqta0g86whkt7j8r7|
LTC: |ltc1qdyzm5cwgt8e2373prx67yye6y9ewk0l8jf3ys9|
DASH: |XkSqR5DxQL3wy4kNbjqDbgbMYNih3a7ZcM|
ETH: |0x045f409dAe14338669730078201888636B047DC3|
DOGE: |DSoekC21AKSZHAcV9vqR8yYefrh8XcX92Z|
Once the cardboard excess was cut away they are ready for the glue. I will be attaching these stickers attached to cardboard to some old magnets I had laying around.
I add the hot snot to the center of cardboard and then work beads around the edge of the cardboard where the magnet attaches to it.
Three of these were made and I am happy with how they came out. Its something I have wanted for awhile but no one sells them. So just got to make my own until more sellers have them online.
Using a fridge magnet to attach the logo made it easy. It already had a big surface to attach to and I think it should make it last longer.
Getting some of that hot glue on my hands sucked, its pretty hot.. go figure. Maybe I should have weared gloves but I may stick them to the magnet with the glue or made it hard to handle them while gluing. Sometimes I have to surface a little skin for some good art sometimes. Just like when working on cars, a little spilled blood is normal for any repair.. hehe
Anyone can make these, buying the sticker from redbubble and then finding some scrap cardboard. Using an old magnet that you do not want anymore works great. These stickers and cardboard have not weight to them so its easy to attach and not worry about the magnet dropping.
You can scale this project to any size you want, I went with the small stickers but they have big ones as well. Something I may do more work with soon is some bigger stickers. But I will need some bigger magnets and cardboard. Another project for another day.
I tend to buy this powdered spice in bulk, never thinking if I could grow it where I live. Well I was delighted to find out they do indeed grow in my climate. It is right on the edge of being able to grow, so hopefully the winter will be nice to it until it can get stronger. If they do die from the winter I may just end up planting them a few feet deep where they should be protected from the freeze.
Adding alot of hardwood chips on top of them will help with the protection from the frosts and freezes we get. And if they survive the plant is a perennial meaning it survives year after year. And eventually the wood chips I put on top of them will break down and feed the growing plant.
Maybe in a few years I can harvest some roots, dry them out and then make my own Turmeric powder. I wonder how it will taste being so fresh compared to what I buy online and at markets. One thing about growing my own food is I have learned there are flavors in my grown food that is lost when bought at most markets. The taste of the plant changes within a few days of harvest, though most people have to wait a week or longer to eat a plant that was harvested. Making it less tasty I would think.
Another reason I am growing Turmeric in the wood chips is for more easy harvest. Just like with Sweet Potatoes, they form underground as well as grow leaves on top. So by growing them in wood chips I can harvest them without digging in the dirt with shovels and possibly damaging the underground plant parts.
I probably will not harvest for a few years, as I want them to grow big and strong. So I will need to buy my spices from others until then. Between Pepper and Turmeric I fly through the stuff so will be nice eventually to maybe make my own.
So we shall see if they survive through the winter, if not Ill try again deeper. And if that does not work, then well maybe its just not meant to be in this region. But I think with some special over wintering techniques I may be able to get them to survive and give me an awesome spice to cook with.
I bought a pallet of flowers, normally I only buy a dozen or less. But I found a great deal on bulk flowers. And a kind that I happened to have planted the year before. So I know I like these, I went ahead and bought more. Platycodon grandiflorus is a perennial that produces balloon shaped flowers. They are quite unique looking and its a hardy plant in the area that I live.
So with all of these little plants to start I got to digging. I do not expect all of them to survive but hoping many of them will. It is the middle of the summer while planting these. But by next year we should know which ones hung on over the winter.
I set up my action camera and do some video lapse of me digging, and placing the little plants into holes and then back filling. Took me a good part of the morning to get all that digging and planting done. But I am sure long term these plants will be a great edition to the garden. Just got to make sure they get enough water between rains.
From what I have read these plants are medicinal as well. They may exhibit neuroprotective, antimicrobial, anti-inflammatory, anti-cancer, anti-allergy, improved insulin resistance, and cholesterol lowering properties.
The roots can be used to make a tea called Doraji-cha. Though I do not want to dig them up and kill them just to make some tea. Maybe if they expand for a few years I can take some root, but for now they need everything they got.
I do not see these flowers much in the states, but from what I have read they are quite popular in Japan, Korea and China. The type I got are called Astra Blue, due to the bright blue coloring of the petals of the flower.
I moved this plant to its new location a few years back. It was being crowded by my Wisteria growing near by. I was worried that it would not be happy with the part sun it gets where its placed now. But it keeps putting on growth and producing flowers so it must be doing okay. It has yellow petals that form in the summer time. Besides my plant, I do not think this plant lives in the wild around me. Its more of a desert shrub thats found in the SW United States (TX and NM) through Mexico.
https://en.wikipedia.org/wiki/Heimia_salicifolia
So Georgia would not be the first place I would expect to see transplants showing up. But regardless the plant seems pretty happy and Ill just let keep producing leaves. I tried making a tea out of it shortly after making this video, though it was way too bitter. I see some people air dry the leaves before fermenting them so maybe thats where I went wrong.
I took some cuttings of this plant and started them in the bubbler. Most of the short cuttings died but two extra long cuttings have new growth on them. Seems it does not reproduce by underground runners so I must grow them from seed or from a cutting. We shall see how well they root and if they indeed form into new plants.
I have a few other places I could put one in the ground if they indeed are okay with growing in the shade.