Trimmer Bike, how to build it yourself, step by step
Hello Friends! In this video I will do a trimmer bike. You will see how to do it step by step. Bicycle with engine from trimmer or chainsaws. Thank you! Good luck!
Hello everyone!
An interesting idea occurred to me - to make a mobile clamp for an angle grinder. The point is that it can be attached to the part that needs to be cut. This is especially important when you need to make a cut at a height or in an awkward position. In fact, the technical task, in my opinion, is well done, please rate my work.
I used a couple of my tools during the construction of this adaptation.
Thank you all for watching.
Attachment for an angle grinder. A new idea for DIY in the home workshop. Clamp for an angle grinder.
...
https://www.youtube.com/watch?v=74phZZavrwg
Greetings, dear viewers! Today we're going to show you an exciting way to turn rusty scrap metal into a practical tool - a locksmith vise, and the best part is that you don't need a welding machine to make it! Get ready for an incredible DIY fork adventure!
In our video, we will show you step by step how to make a locksmith vise out of rusty scrap metal using readily available tools. You will learn about several ingenious ways of processing metal without welding and using special tools.
Before you begin, remember the importance of safety. We will carefully tell you about the basic safety measures that must be taken when working with metal and tools.
Let's start by collecting the necessary materials and tools. After showing you some easy ways to find rusted scrap metal in your garage or warehouse, we'll move on to metal working and shaping. With basic tools like a hammer, saw, file, sander, and more, you'll be prepared to build your own DIY tool.
In this video, we'll cover some of the techniques you can use to bend, cut and polish metal to create a vise of higher quality and durability. You will learn how to correctly
cut and mark the metal to the exact dimensions and shape of your tool.
In the final stages, we will demonstrate how you can adjust and improve the operation of your locksmith vice, ensuring smooth operation and convenient use.
This video will not only inspire you to be creative and DIY, but will also show that even with old scrap metal, you can create something useful and interesting. Invite friends, family, and other repair enthusiasts to see how to build your own tool that will be your faithful assistant.
Don't forget to subscribe to our channel to keep up to date with the workshops and repair projects we post regularly. Thank you for watching and we hope you enjoy this video and get some inspiration for your future creative projects!
...
https://www.youtube.com/watch?v=p5YX2TvT0WA
Hello everyone!
I am developing the idea from the previous video, namely - a mobile attachment for longitudinal cutting with an angle grinder. I pulled out all my arsenal - cutting, drilling, grinding, welding, lathe. You can see for yourself what happened. I look forward to your criticism and ideas.
Thank you all for watching.
Attachment for an angle grinder. A new unusual idea for DIY in the home workshop. Clamp for an angle grinder.
...
https://www.youtube.com/watch?v=UaAyzRFvn3Q
Angle grinder tool for sharpening drills. Tool for sharpening drill bit. Simple design and easy to make. Drill bit sharpening tool. Tool for sharpening drills on an angle grinder
...
https://www.youtube.com/watch?v=Q_5pUZwve94
A belt grinder made from the engine of an old washing machine.
Connecting the UDOC electric motor to the 220 Volt network.
Useful and interesting DIY with a motor from a washing machine.
A new life for an old electric motor from a washing machine.
What can be done from an old electric motor.
How to make a belt grinder yourself.
Self-made drill grinder made of metal scrap.
Don't throw away an old electric motor, it can be used to make a great grinder.
Replacement of bearings in an old electric motor.
Restoration of an old electric motor.
...
https://www.youtube.com/watch?v=EeOQPwFneI4
See previous parts about building my lathe:
1. https://youtu.be/OQbGEt1JGFk
2. https://youtu.be/Nny0Ib9JzWE
3. https://youtu.be/XqwBb3mKVzo
4. https://youtu.be/xBZQoasTVO8
In this, the fifth part, I finally made a tailstock for a lathe for processing metal, plastic and wood.
The work turned out to be simple, but quite precise.
There was some turning work, on my little Chinese ProCraft VMM800 lathe.
And also, of course - cutting, welding, drilling, cleaning.
Practically all technological operations on metal processing.
The result is in the video, write your opinion, what you think about it all.
TikTok: https://tiktok.com/@redneq5
Instagram: @madeingarage1
Facebook: https://facebook.com/groups/1113008455830620/
Email: migdiy2020@gmail.com
...
https://www.youtube.com/watch?v=B8mPuMEy6-A
Greetings everyone!
In this video you can see how I made a belt grinder from an old 370 watt three-phase electric motor. Its nominal speed is 2740 rpm.
The design is designed for tape size 50*915 mm (2*36 inches).
The private pulley with a diameter of 120 mm is glued from plywood and turned on a lathe.
And two rollers, one of which is barrel-shaped, are made of kaprolon. Their diameter is 60 mm, and the width is 55 m. Number 203 (CX company) put the bearings there.
The base plate, i.e. the frame, is 8mm (1/3 inch) thick machine laser cut. The lever is also cut from 8mm steel.
Side table size 200*120 mm (steel 6 mm).
The whole mechanism is driven by a three-phase motor of 2750 rpm with a power of 370 Watts. I connected this motor to a single-phase 220 volt network through a 700 watt frequency converter that I previously bought in China.
The whole structure turned out to be strong and compact.
The tape, during the operation of the machine, stands in place as if dug in.
Watch the video to the end, express your opinion.
Thank you for your attention, good luck!
TikTok: https://tiktok.com/@redneq5
Instagram: @madeingarage1
Facebook: https://facebook.com/groups/1113008455830620/
Email: migdiy2020@gmail.com
...
https://www.youtube.com/watch?v=DPSj_hwwKVE