Published By
Created On
12 Aug 2022 13:44:44 UTC
Transaction ID
Cost
Safe for Work
Free
Yes
UBAR2 3D Printed AR15 Lower
A little fun with the UBAR2, running some steel at 50 yards. 20" ARs are magical.
--------------------------------------------------------------------------------------------------------------
I'm Ivan - a fella who works to document and record the history and technical background of the development of homemade firearms.
You can support me directly on Utreon - https://utreon.com/c/ivanthetroll/
You may know me from my work with ARES Research to help author reports about this topic - this channel shows the "behind the scenes" testing that goes into building the body of knowledge requied.
Regardless of if you are here for the research, technology, or just to see some funky looking guns tested, I hope you enjoy.
**All firearms shown and tested are done so in full compliance will all applicable laws. All test firing and use of firearms is conducted on a properly zoned, legally operated firing range.**
...
https://www.youtube.com/watch?v=GG2cS8X60yM
--------------------------------------------------------------------------------------------------------------
I'm Ivan - a fella who works to document and record the history and technical background of the development of homemade firearms.
You can support me directly on Utreon - https://utreon.com/c/ivanthetroll/
You may know me from my work with ARES Research to help author reports about this topic - this channel shows the "behind the scenes" testing that goes into building the body of knowledge requied.
Regardless of if you are here for the research, technology, or just to see some funky looking guns tested, I hope you enjoy.
**All firearms shown and tested are done so in full compliance will all applicable laws. All test firing and use of firearms is conducted on a properly zoned, legally operated firing range.**
...
https://www.youtube.com/watch?v=GG2cS8X60yM
Author
Content Type
Unspecified
video/mp4
Language
English
More from the publisher
Controlling
VIDEO
'3011
'3011'-3d-printed-1911-frame-7
After more testing, tweaking, and the CAD equivalent of feed ramp polishing, the 3011 is officially released to beta over on the rocketchat.
Here's a little shooting footage showing how it's running.
...
https://www.youtube.com/watch?v=9Q0Sb7N5-7g
Transaction
Created
3 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
SF5 L
sf5-lineup-shooting-five-different-3d
Shooting five of my SF5 builds and talking about some details on them. This build is in beta currently over on the rocketchat.
Audio is a little rough, today decided to have 20mph sustained winds with gusts over 50mph. Goofy weather. Anyway, here's some of what I've been working on.
--------------------------------------------------------------------------------------------------------------
I'm Ivan - a fella who works to document and record the history and technical background of the development of homemade firearms.
You can support me directly on Utreon - https://utreon.com/c/ivanthetroll/
You may know me from my work with ARES Research to help author reports about this topic - this channel shows the "behind the scenes" testing that goes into building the body of knowledge requied.
Regardless of if you are here for the research, technology, or just to see some funky looking guns tested, I hope you enjoy.
**All firearms shown and tested are done so in full compliance will all applicable laws. All test firing and use of firearms is conducted on a properly zoned, legally operated firing range.**
...
https://www.youtube.com/watch?v=davE8qmnqAc
Transaction
Created
3 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
MY FA
my-favorite-nerf-gun...
...is chambered for 308 darts
--------------------------------------------------------------------------------------------------------------
I'm Ivan - a fella who works to document and record the history and technical background of the development of homemade firearms.
You can support me directly on Utreon - https://utreon.com/c/ivanthetroll/
You may know me from my work with ARES Research to help author reports about this topic - this channel shows the "behind the scenes" testing that goes into building the body of knowledge requied.
Regardless of if you are here for the research, technology, or just to see some funky looking guns tested, I hope you enjoy.
**All firearms shown and tested are done so in full compliance will all applicable laws. All test firing and use of firearms is conducted on a properly zoned, legally operated firing range.**
...
https://www.youtube.com/watch?v=UftLhJ7xbgU
Transaction
Created
3 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
3D PR
3d-printed-hybrid-diy-glock-slide-will
After the last test (which was a joke, effectively), Boostwillis came up with this great idea - threaded rods and reinforcing plates throughout the slide to give it a chance of holding up. Will it work? Let's find out!
--------------------------------------------------------------------------------------------------------------
I'm Ivan - a fella who works to document and record the history and technical background of the development of homemade firearms.
You can support me directly on Utreon - https://utreon.com/c/ivanthetroll/
You may know me from my work with ARES Research to help author reports about this topic - this channel shows the "behind the scenes" testing that goes into building the body of knowledge requied.
Regardless of if you are here for the research, technology, or just to see some funky looking guns tested, I hope you enjoy.
**All firearms shown and tested are done so in full compliance will all applicable laws. All test firing and use of firearms is conducted on a properly zoned, legally operated firing range.**
...
https://www.youtube.com/watch?v=mD81-nrpPEE
Transaction
Created
3 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
3D PR
3d-printed-mp5-100-yard-plinking
Some 100yd shooting with the KF5. Soft shooting, lightweight, accurate - it makes for a great range gun from the 10 yard line to the 100 and beyond.
--------------------------------------------------------------------------------------------------------------
I'm Ivan - a fella who works to document and record the history and technical background of the development of homemade firearms.
You can support me directly on Utreon - https://utreon.com/c/ivanthetroll/
You may know me from my work with ARES Research to help author reports about this topic - this channel shows the "behind the scenes" testing that goes into building the body of knowledge requied.
Regardless of if you are here for the research, technology, or just to see some funky looking guns tested, I hope you enjoy.
**All firearms shown and tested are done so in full compliance will all applicable laws. All test firing and use of firearms is conducted on a properly zoned, legally operated firing range.**
...
https://www.youtube.com/watch?v=C_YMb1Hj8IE
Transaction
Created
3 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
'3011
'3011'-3d-printed-1911-frame-5
Part Two of the 3D Printed 1911 Frame testing/development.
We're on aluminum rails! Unfortunately, I reverted my changes to the location of the fire control group (from V2 to V1), so we have hammer follow and no hammer reset. Printing a V4 frame now that should correct the hammer follow and accept the aluminum rails.
I put about 50 rounds on this (V3) frame today - no signs of wearing or cracking. It does have some feeding issues with the cheap magazine seen in the video - this should be fixed by moving the height of the magazine catch up a little, which frame V4 will feature.
Making progress!
...
https://www.youtube.com/watch?v=D9mLQJvyr5Y
Transaction
Created
3 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
MAGDU
magdumping-a-3d-printed-magazine-in-a-3d
Running the Extendez v2 magazine in the DD17.2 frame.
Pretty cool how much you can get away with, even with just PLA+.
...
https://www.youtube.com/watch?v=w3fLAaVe9P0
Transaction
Created
3 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
CZAR
czar-v3-testing
Doing a little testing with the CZAR V3 - an update to the CZAR V2 by FMDA1776. The update builds on the V2 improvements with better ergonomics, a little easier to print design, and a tweak to the hammer location to eliminate the binding between the hammer and bolt some users ran into.
--------------------------------------------------------------------------------------------------------------
I'm Ivan - a fella who works to document and record the history and technical background of the development of homemade firearms.
You can support me directly on Utreon - https://utreon.com/c/ivanthetroll/
You may know me from my work with ARES Research to help author reports about this topic - this channel shows the "behind the scenes" testing that goes into building the body of knowledge requied.
Regardless of if you are here for the research, technology, or just to see some funky looking guns tested, I hope you enjoy.
**All firearms shown and tested are done so in full compliance will all applicable laws. All test firing and use of firearms is conducted on a properly zoned, legally operated firing range.**
...
https://www.youtube.com/watch?v=evq3Il6S4Uo
Transaction
Created
3 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
'3011
'3011'-3d-printed-1911-frame-2
Initial testing on the 3D printed 1911 frame. I'm happy with the results - this frame lasted 20 rounds on all plastic rails, which is pretty impressive. Semiautomatic fire won't work on this frame because the fire control group sits too low - the hammer never gets reset by the slide.
Next version should fix the hammer reset issue.
...
https://www.youtube.com/watch?v=XceCP6Sy820
Transaction
Created
3 weeks ago
Content Type
Language
video/mp4
English