this new 2022 series will have the option of a bolt on top rail. (yes, I have gotten those requests over the years) but the real reason I made it's that this shroud will soon also have a lower rail option. that is made possible by using different M3 bolts. but more on that later
the name 227 stands for the barrel length this is made for. but this is the same length as what was called the M shrouds in the past like the: 2021 LB short, AK shroud, TEC9 M, LB short.
this set will also include a special mandril custom made for me by ImmortalRevolt that can be used with the ECM v3 set that can be found here. https://odysee.com/@c0ld_d8rk_h8nd:8/ECM-Barrels-v3.5:e
I have updated it to a V2 model this will add 2 bolt holes so the rail is stronger
_
what does the MKIISD update mean?
the main update and why these are called MKIISD are that I took some improvements from the FGC9 SD and placed in the MKII shroud models that I designed. but keep in mind the are still made to just work with the MKII this is because the rail stands higher then the SD does.
so the magnet design of the MKII have been removed. and the SD style magnet have been added. the to install it is basically the same. but you will be using a cylindrical magnet with a OD of 5mm and 10mm long in size.
and wile I’m add it did I also add the grove that prevents the barrel from rotating
--
this new 2022 series will have the option of a bolt on top rail. (yes, I have gotten those requests over the years)
but the real reason I made it's that this shroud will soon also have a lower rail option. that is made possible by using different M3 bolts.
but more on that later
(the low rails set have been added!) they will look weak when you take them from your printer. but once mounted they should work fine. this will lower the rail a bit. this have been done before but so far I know of not in this way before. for this set will you use: Flat Countersunk Head M3 Screws in a lengt of 14mm
the name 300 stands for the barrel length this is made for. but this is the same length as what was called the L shrouds in the past like the: 2021 LB, 2021 LB M, LS, TEC9 L, LB.
for the barrel? you can use the ECM v3 set that can be found here https://odysee.com/@c0ld_d8rk_h8nd:8/ECM-Barrels-v3.5:e
FGC-6BL starter kit
https://www.printables.com/model/400298-fgc-6bl-mkimkii-bolt-lock-starter-kit-gbb-airsoft-
https://cults3d.com/en/3d-model/various/fgc-6bl-mki-mkii-bolt-lock-starter-kit-gbb-airsoft-fgc-9-replica
the parts can be found in the links bellow
-
FGC-6BL MKII links
https://www.printables.com/social/180009-untangleworks/collections/492099
https://cults3d.com/en/design-collections/UntangleART/fgc-6bl-mkii-mkiisd
FGC-6BL MKI and Hybrid
https://www.printables.com/social/180009-untangleworks/collections/492098
https://cults3d.com/en/design-collections/UntangleART/fgc-6bl-mki-hybrid
----
communication group on discord
https://discord.gg/dxR64kMHeT
short PB movies and products photo’s on
instagram @UntangleWORKS
TURN ON: Print Tiny walls! I did my best, but it was really time consuming to make it totally solid in the inside... so some walls are tiny depending on the scale you make it in. so check your preview fist in you slicer, Before printing!
I have made a 1/6 scale these can be used for like those action figures that use the 1/6 scale weapons.
wall thickness 4, infill 20% should be more than enough. but use your own judgment on it
for the promoting the FGC9 it would be nice so see some fun time laps movies of this. or some crazy colours! be creative with it. or use the 1/6 action figures.
put it out there.
it have taken me quite some time and attempts to simulate all the mechanics of the FGC-9 into a 3d printable airsoft replica, but the side projects like the FGC-6FA were good learning points to get closer to this day.
it's not ready for release at this time of uploading this video.
but you might want to check the links below on a later date for the files.
but there will be a official release video announcement when it's ready of course
FGC-6H MKII links
https://www.printables.com/social/180009-untangleworks/collections/451552
https://cults3d.com/en/design-collections/UntangleART/fgc-6-h-mkii
FGC-6h MKI and Hybrid
https://www.printables.com/social/180009-untangleworks/collections/451551
https://cults3d.com/en/design-collections/UntangleART/fgc-6-h-mki
----
communication group on discord
https://discord.gg/dxR64kMHeT
short PB movies and products photo’s on
instagram @UntangleWORKS
here is a small update on the UNW P90 Hi Cap mag lid that I designed so the mag got something similar to a 'door" so you can store the mag away with out spilling paint al over the floor. making it now also possible to technically swab over from regular mags to this hi cap mag.
link to the official UNW website
https://www.untangleart.com/unw/
or for more UNW P90 parts
https://www.thingiverse.com/untangle/collections/unw-p90
https://www.prusaprinters.org/social/180009-untangleworks/collections/88913
playlist to the UNW P90 project videos
https://www.youtube.com/watch?v=rIBcPt25NZw&list=PLVTi8DENyyvzFX1qq4oYlBqv93s8JqJPQ
communication group on discord
https://discord.gg/yVqrB7N
short PB movies and products photo’s on
instagram
@UntangleWORKS
for donations a link to Paypal
https://www.paypal.me/dannyhoogesteger
this update will improve the fitting of the barrel block. so the barrel should not have any play in it at this stage. also the installation of the trigger bar part is a lot more easy in this version. and also I took the time to update the MKI with some of the features of the MKII so installation should be a more easy like on the MKII.
the files can be found here.
MKI
https://cults3d.com/en/design-collections/UntangleART/fgc-68-mki
https://www.printables.com/social/180009-untangleworks/collections/88907
MKII
https://cults3d.com/en/design-collections/UntangleART/fgc-68-mkii
https://www.printables.com/social/180009-untangleworks/collections/88908
----
communication group on discord
https://discord.gg/yVqrB7N
short PB movies and products photo’s on
instagram @UntangleWORKS
I have modded 2 of the lower buffer tubes so it should give you a nicer over all shape.
for all the other stock options look at this original set
https://www.printables.com/model/87807-fgc-68-buffer-tube-butt-stock-set
https://www.printables.com/model/87793-fgc-68-wtf-9-folding-buttstock-adapter
https://www.printables.com/model/87792-fgc-68-mod-9-folding-buttstock-adapter
I want to clear some things up in this video so you don't get the wrong expectations about this project and the use of Silk PLA with paintball.
for some good pointers how to get started with printing Silk PLA do I highly recommend that you check the 2 video's out from Darkwing Dad.
https://www.youtube.com/watch?v=3i90F1ZrxoQ
https://www.youtube.com/watch?v=Yb2ixVDe1eg&t=503s
this design is more like a proof of concept to make version that would be considered more of a universal nature. and I must say it worked well so once every thing is on the site and the first things of the UNW P90 line up are online then I will work this concept further out so it can be easy for people to adapt it for there personal markers.
link to the official UNW website
https://www.untangleart.com/unw/
or for more UNW P90 parts
https://www.thingiverse.com/untangle/collections/unw-p90
https://www.prusaprinters.org/social/180009-untangleworks/collections/88913
playlist to the UNW P90 project videos
https://www.youtube.com/watch?v=rIBcPt25NZw&list=PLVTi8DENyyvzFX1qq4oYlBqv93s8JqJPQ
communication group on discord
https://discord.gg/yVqrB7N
short PB movies and products photo’s on
instagram
@UntangleWORKS
for donations a link to Paypal
https://www.paypal.me/dannyhoogesteger