The Strike Variable Optic Mount for Aimpoint® Micro Standard is a user-defined height optic mount. A mount option for the popular Aimpoint® Micro Standard footprint which is used on many red dots offered on the market. With a height range of 1/3 co-witness to a maximum of 1.93 inches, this mount allows for precise, incremental height adjustments via notches on the slider. When properly installed and torqued, this mount is also designed to maintain zero even after re-installation, giving you peace of mind. Made from lightweight and high-strength 6061-T6 aluminum and machined with precision, the Strike Variable Optic Mount for Aimpoint® Micro Standard is a user-defined height to configure you specific setup for your specific needs.
Learn more:
https://bit.ly/SIT1VOM
The Strike Variable Optic Mount for Aimpoint® Micro Standard is a user-defined height optic mount. A mount option for the popular Aimpoint® Micro Standard footprint which is used on many red dots offered on the market. With a height range of 1/3 co-witness to a maximum of 1.93 inches, this mount allows for precise, incremental height adjustments via notches on the slider. When properly installed and torqued, this mount is also designed to maintain zero even after re-installation, giving you peace of mind. Made from lightweight and high-strength 6061-T6 aluminum and machined with precision, the Strike Variable Optic Mount for Aimpoint® Micro Standard is a user-defined height to configure you specific setup for your specific needs.
...
https://www.youtube.com/watch?v=0NFvzeknF50
Learn more:
https://bit.ly/SIT1VOM
The Strike Variable Optic Mount for Aimpoint® Micro Standard is a user-defined height optic mount. A mount option for the popular Aimpoint® Micro Standard footprint which is used on many red dots offered on the market. With a height range of 1/3 co-witness to a maximum of 1.93 inches, this mount allows for precise, incremental height adjustments via notches on the slider. When properly installed and torqued, this mount is also designed to maintain zero even after re-installation, giving you peace of mind. Made from lightweight and high-strength 6061-T6 aluminum and machined with precision, the Strike Variable Optic Mount for Aimpoint® Micro Standard is a user-defined height to configure you specific setup for your specific needs.
Learn More
https://bit.ly/3SIARPSA
The Strike AR Picatinny Stock Adapter gives the user the ability to mount a 1913 Picatinny interface stock/stabilizer assembly where normally the receiver extension is attached. For ARs that do not need an in-line buffer and buffer spring to function, this is a simple, fast and budget friendly conversion that works on both AR-15 and AR-10 lower receivers. The Strike AR Picatinny Stock Adapter mechanism threads into a standard AR rear 1 3/16"-16 HSS right hand thread and has an anti-loosening detent that is very positive and tactile while keeping the rear detent spring captured for the rear takedown pin. The 1913 Picatinny section of this adapter includes a 4-slot rail section. As an added feature, there is a 360° free swivel QD socket that the user can orientate to either left or right side to best configure the preferred setup. Compatible with majority of folding stocks or stabilizers on the market. When you want to use an upper receiver where everything is self-contained, quickly convert your AR lower receiver to mount a Picatinny stock or stabilizer with the Strike AR Picatinny Stock Adapter.
*Use included allen keys for installation. Not doing so may cause set screws to strip. We recommend all parts be installed by a licensed gunsmith.
Available Now:
http://bit.ly/SI_AR_CAGB
Traditional adjustable AR gas blocks often require tools to adjust the settings. On top of that, going back to the same settings can be difficult like when switching from suppressed and unsuppressed configurations. Remove the hassle but keep the functionality with Strike Industries’ innovative adjustable gas block. Using 5 pre-sized settings and 1 closed setting, easily return to the exact same level of gas flow for your direct impingement system. The gas block easily switches position by rotating the collar by hand or while it’s inside a hand guard with a bullet or blade.
Learn more
https://bit.ly/SIOPPLauncher
FORE! Based on the Strike Industries OPPRESSOR blast shield muzzle device which aids in redirecting blast and sound, this SI OPPRESSOR Golf Ball Launcher also uses the quick detach PATENTED Strike Rapid Engage Mount (SREM) system mount. Using ONLY blanks, golf balls can be launched 100s of yards, of course ONLY in a safe direction. Depending on the various golf ball, golf ball fit, weapon and blank used, you can launch golf balls 500+ yards. Point to just about any angle without the ball falling out as the tapered cone/cup and large O-ring is designed to fit most golf balls on the market. Constructed of a steel SREM base with a 7075-T6 aluminum body, this SI OPPRESSOR Golf Ball Launcher attaches (and detaches) in seconds propelling golf balls down range with velocity and distance. You can also use this SI OPPRESSOR Golf Ball Launcher device as a blast shield and concussion reducing device with live ammo ONLY WITHOUT a golf ball inserted.