Excerpt from: Heart Attacks Webinar from September 28, 2022 https://www.bitchute.com/video/0GpZxzSbkIgi/

Source: QPC How To, Step-by-step https://www.youtube.com/watch?v=1XTPHTT-RqM From the video description: Instructions 1. South pole of magnet facing the copper. 2. Copper and Zinc are diamagnetic and polarity sensitive flip metal until you find the optimum output. 3. White paper soaked in water with 5-7% magnesium content. Avoid sodium (salt). 4. A single cell assembly will produce up to 1.2v. 5. Repeat the process of stacking cells together to achieve higher voltages 6. You should be able to light an LED by touching the LED leads to either side of the cell. Note: Wet paper is a design deterrent because when the cell drys it loses voltage and must be hydrated again. We are experimenting with no hydrated materials. -DISCLAIMER- The content contained in the videos published on GAEA's Channels are strictly the theories, opinions and representations of the author only. Parental guidance is suggested as some language may not be suitable for children.