When I set the On/Off Sync to Enable, this works. Channel 1 and 2 switch on and off together, if Tracking is On.
When I switch off the PSU, this setting does not persist. It starts up with On/Off Sync: Disable, and the channels do not power on together.
I have startup mode set to: keep Last setting. Power On: Last
...
https://www.youtube.com/watch?v=J-beOZi7Yfk
Vibration detection with piezo element. Is the peak voltage under the max voltage for Arduino UNO, MKR or Raspberry Pi?
With the simple protection circuit of a kit for Arduino and Pi.
for blog post on element14: https://community.element14.com/challenges-projects/project14/tales4makers/f/forum/51513/the-predictive-maintenance-tale---piezo-element-voltages
...
https://www.youtube.com/watch?v=8hjoYlijXrU
The TDC1000-TDC7200EVM evaluation module has 4 main parts
The TDC1000 analog front-end and a pre-programmed MSP430 microcontroller on the board, a 1MHz Piezo Ceramic sensor that plugs into the board and a GUI client for on your PC.
In this blog I'm attaching the Piezo transponder to the "liquid under test" container:
https://www.element14.com/community/groups/roadtest/blog/2015/12/16/ti-ultrasonic-sensor--prepping-the-transponder
...
https://www.youtube.com/watch?v=ZOj3pt3dhD0
For element14 RoadTest: Unboxing the TI Ultrasonic Sensing evaluation module
blog: https://www.element14.com/community/message/169291/l/roadtest-unboxing-the-ti-ultrasonic-sensing-evaluation-module#169291
...
https://www.youtube.com/watch?v=3v7UWCX16LM
How to control a PWM signal's duty cycle from a Rotary Encoder on a Texas Instruments Hercules microcontroller with the EQEP module
...
https://www.youtube.com/watch?v=-a2MYSDGDz4
Drive the Educational BoosterPack MKII LCD via Hercules LaunchPad
Part 1 is the basic - but fundamental - functionality, and the electronics.
...
https://www.youtube.com/watch?v=r6OQp4oetKw