A series of receivers, compatible with OEM and most aftermarket 10/22 parts.
Models:
*Model I: Designed with a recessed channel down it's center to allow the use of iron sights.
*Model O: Designed to be used with optics. A 1913 Picatinny rail is attached to the receiver top.
Both models have a reinforced variant, denoted with an R. (Ex. Model I-R) These models have channels in the sides of the receiver that allow for the use of 12-24 threaded nuts to be pressed into the path of driven V Block bolts. The use of metal nuts allows for retightening of the V Block bolts repetitively, and allow the proper use of blue loctite.
Users of other 3DP 10/22 variants have noted that when they would have to retighten the bolts, after a number of times the plastic threads in the receiver sheared; permanently damaging the receiver, and the user wouldn't be able to retighten the block and barrel.
The Odin-37/40 is a 3D Printed left side opening, breech loaded
signaling device. The device was designed from the ground up
specifically to withstand extreme load specs. The Odin is also capable of
accepting 40MM Barrels, available from Methematics at
LauncherPope.com. Parts kits are also available from inmc.com.
The 40mm version IS classified as a destructive device in the
United States and requires the proper tax paperwork to legally build.
Know your laws for where you live and keep yourself safe.
5/6 edit: added rail mounting hardware
Make your signals more personal with the 37mm Propaganda Delivery Device. Simply add the PDD Capsule and Nosecone to any existing M781 or JP Rifled Projectiles.
Send your favorite signals with personalized messages concealed inside to really get the point across.
The gripping, hard hitting sequel to the critically acclaimed 37mm Handbook; follows the story of a 26.5mm projectile who wants to defy the odds and learn to fly.
V1.1 update-
"some geometry changes"
The UMP 11/9 is a 3D-Printed PCC patterned after the HK UMP.
It is chambered in 9mm and uses commonly available Mac ll/9 components as well as DIY magazines.
We have made alot of stuff that takes a 10/22 bolt, now you can simplify and speed up the charging handle/spring installation process like a boss, a pokedaboss