How To Test Fit A Quarter Panel Replacement on a 66 Mustang So It Will Fit Correctly When Welding On
http://CollisionBlast.com - Quarter Panel Replacement - What is you welded on a quarter or any weld-on panel to discover it did not fit correctly? Not much you could do at that point! Other than to start cutting into the panel again. Therefore, it is important to check the fit for weld on panels often. It may seem redundant and time consuming, but this may save you time and money in the long run. Like the saying, better safe than sorry. When it comes to weld-on panels, i recommend taking extra time to test fit so everything will work as planned when the welder is cranked on.
Mustang Restoration Project: In this video, we removed the old rusted outer wheelhouse from the mustang and we are preparing the flanges for the new wheelhouse. Once semi-straightened, we'll do a quick test fit before continuing the project.
Be sure to visit our new website at http://MyMustangRestoration.com
http://CollisionBlast.com - - DIY How To Change A Rear Tail Light Bulb On A 2009 Pontiac G6 and Save $40. - Hello Donnie Smith here, in today's video I am going to show you how to replace a rear tail light bulb. This will save you $40 when replacing a bulb on a 2009 Pontiac G6. The part only costs two dollars and only takes 5 min. to install. The first thing you want to do is remove the cargo net. There is an upper and lower attachment where it is attached. Simply pull the cargo net over the knob to remove. Then unscrew by hand the knobs that the cargo net was attached to you. Once those two knobs, the upper and lower, are removed you can pull back the truck interior carpet piece that covers the taillight. Next, once you have that interior carpet pulled back, it is not necessary to remove the complete interior just pull it back far enough to gain access to the two bolts underneath. Once this is done using a 10 mm wrench or a simple crescent wrench removed the two bolts holding the tail light in. Now removed the taillight assembly which will pull out from the car body. Next twist the tail light bulb connection to removed from the taillight housing. Then simply pull the bulb out of the socket. The part number will be labeled on the bulb itself. I believe this bulb was a 1157. You should be able to get one of these from any parts store. If in question, take the bulb with you to show the parts salesperson. After you get the new bulb pushed back into the socket. A test can be done at this time to assure the bulb is now working. Now basically just reverse the process, put the taillight assembly back on to the car body. Before securing it may be wise to check it one more time to make sure everything is working correctly. Now secure the two boats using a 10 mm ranch or crescent wrench, to secure the two knobs that hold the interior trim piece in him reattach the cargo net and you're done. That is all there is to it which only takes 5 min. and cost only costs two dollars for the part. Thanks for watching. For more tutorials visit http://www.CollisionBlast.com Be sure to rate this video and give us a facebook like when visiting our website.
FREE access to training at http://CollisionBlast.com - Check out some of the awesome cars at the car show in Park City, Kansas,
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
http://MyMustangRestoration.com - This is just a quick update on the 1966 Ford Mustang project. We've installed the right quarter panel, now we're going to replace the left quarter panel.
Looking For Paint Supplies? Check out http://www.collisionblast.com/paint-supplies for the best online prices and receive front door service. Looking For More Training? Visit http://CollisionBlast.com to Subscribe For Access To Hours of FREE Training. Let's make your Dream Car Become A Reality.To stay updated with upcoming videos and hours of free training, visit http://CollisionBlast.com - - In this video, 3M is going to demonstrate how to professionally apply window tint to a curved back glass.
This is a video I took at SEMA 2011 demonstrating how to window tint professionally. Window tint has been around for a long time. However, tinting curved glass, such as a back window has always been a challenge. Now you will learn a method that makes this a very simple process. Knowing a few of the tricks of the trade can make the job much easier.
Sit back and learn how the professionals at 3M do this.
FREE access to training at http://CollisionBlast.com Share this video https://youtu.be/5nKdFy4pBGE
Also be sure to subscribe to this #DIYAutoBodyandPaint to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
___
PLAYLISTS
___
Q&A Video Response - https://www.youtube.com/playlist?list=PLFE0C4096959A85C4
Donnie and Jess - https://youtu.be/RO0_SKodbUk?list=PL49vEsY2VV2r7jFcKxDpgE7mpFqFJvfVl
Eastwood Video Series - https://youtu.be/uPgIOHkr0oE?list=PL49vEsY2VV2owacnGOt31FQj6N3e9_ugi
Plastic Repair - https://youtu.be/XrJ7t6KwdNs?list=PL49vEsY2VV2rhmWljJFSJSoUasg7-XzVF
Rust Patch - https://youtu.be/LwTBmRMRkbg?list=PLFE05DAE7CF6FD4CB
Spraying Matte Colors - https://youtu.be/Xc6f1tTam0w?list=PL2E1A50BE4361BB95
Spray Gun Adjustment - https://youtu.be/AY8_2qx4htw?list=PL9D278D201EBFA3B6
Masking Tips - https://www.youtube.com/playlist?list=PL49vEsY2VV2oBmZP4zaJ6D2paLe0VjJoJ
Basic Car Maintenance - https://www.youtube.com/watch?v=TEk7ci92DFY&list=PL9E857813A2D4EC64
_
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
_
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
_
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
If something is worth doing, then do your best and have a BLAST doing it.
_
DIY Auto Body and Paint -
The information provided in this video is for educational and informational purposes only and solely as a self-help tool for your own use. It is the responsibility of the viewer to First read the Technical Data Sheet, Material Safety Data Sheet, and any other instructions for each product, tool, or equipment used and to follow the safety recommendations of the manufacture. DIY Auto Body and Paint assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. There are no warranties or guarantees of the results of the viewer after watching this video. The results will vary according to each individuals talents, knowledge, and skills.
For Auto Supplies visit http://CollisionBlast.com/Supplies - FREE access to training at http://CollisionBlast.com - Awesome rides of the Midwest - Automobilia car show is held each year in Wichita, Kansas. The car show is free admission and feature tons of awesome rides to look at.
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
Music
Richard Pryn
Urgency
CueSongs
In this video we are going to get the Eastwood Mustang project masked and ready to paint. #maskforpaint Masking a car time a lot of time, but will be worth it once the job is complete. A sloppy mask job can result in a for sure tell tale signs that the car has been painted. FREE access to training at http://CollisionBlast.com Share this video https://youtu.be/P_YWu1wlvuQ
Also be sure to subscribe to this #DIYAutoBodyandPaint to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
PLAYLISTS
Q&A Video Response - https://www.youtube.com/playlist?list=PLFE0C4096959A85C4
Donnie and Jess - https://youtu.be/RO0_SKodbUk?list=PL49vEsY2VV2r7jFcKxDpgE7mpFqFJvfVl
Eastwood Video Series - https://youtu.be/uPgIOHkr0oE?list=PL49vEsY2VV2owacnGOt31FQj6N3e9_ugi
Plastic Repair - https://youtu.be/XrJ7t6KwdNs?list=PL49vEsY2VV2rhmWljJFSJSoUasg7-XzVF
Rust Patch - https://youtu.be/LwTBmRMRkbg?list=PLFE05DAE7CF6FD4CB
Spraying Matte Colors - https://youtu.be/Xc6f1tTam0w?list=PL2E1A50BE4361BB95
Spray Gun Adjustment - https://youtu.be/AY8_2qx4htw?list=PL9D278D201EBFA3B6
Masking Tips - https://www.youtube.com/playlist?list=PL49vEsY2VV2oBmZP4zaJ6D2paLe0VjJoJ
Basic Car Maintenance - https://www.youtube.com/watch?v=TEk7ci92DFY&list=PL9E857813A2D4EC64
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
If something is worth doing, then do your best and have a BLAST doing it.
DIY Auto Body and Paint -
The information provided in this video is for educational and informational purposes only and solely as a self-help tool for your own use. It is the responsibility of the viewer to First read the Technical Data Sheet, Material Safety Data Sheet, and any other instructions for each product, tool, or equipment used and to follow the safety recommendations of the manufacture. DIY Auto Body and Paint assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. There are no warranties or guarantees of the results of the viewer after watching this video. The results will vary according to each individuals talents, knowledge, and skills.
This video episode is brought to you by http://CollisionBlast.com
Today's question is: Can urethane base coat be applied over lacquer? This is a common question with a lot of opinions and answers. I'll give you my opinion, what I researched, and what one paint manufacture had to say about it.