Published By
Created On
19 Sep 2022 14:02:10 UTC
Transaction ID
Cost
Safe for Work
Free
Yes
"Mountain Scout" Compact Fixed Carbine Buttstock
"Mountain Scout" Compact Fixed Carbine Buttstock: Laffs Dynamics
A compact version of the Laffs Dynamics original Mountain Scout Compact Fixed Carbine Buttstock. Reduced in overall length by
24mm. (Roughly 1in.)
Has a single 34mm long, vertical sling loop.
Comes with two buttpads:
* Standard, 8mm thick
* Extended, 18mm thick
This buttstock is designed for Milspec Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .2mm
Wall Perimeters: 5+
Infill: 25%+
Material Flow: 100%
NO support material is needed.
Hardware Needed:
1x M8x10 Hex Socketed Set Screw
2x M4x12 Screws
A compact version of the Laffs Dynamics original Mountain Scout Compact Fixed Carbine Buttstock. Reduced in overall length by
24mm. (Roughly 1in.)
Has a single 34mm long, vertical sling loop.
Comes with two buttpads:
* Standard, 8mm thick
* Extended, 18mm thick
This buttstock is designed for Milspec Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .2mm
Wall Perimeters: 5+
Infill: 25%+
Material Flow: 100%
NO support material is needed.
Hardware Needed:
1x M8x10 Hex Socketed Set Screw
2x M4x12 Screws
Author
Content Type
Unspecified
application/zip
Language
English
More from the publisher
32,000,000.00 LBC
AMMO
Ammo-Keychains
Keychains with a silhouette that is dimensionally accurate to the real life calibers they represent.
Collection 1 for handguns come in six calibers: 10mm Auto, 40S&W, .357 Magnum, .38 Special, .45 ACP, and 9x19 NATO.
Now you can continue the constant caliber wars debate. Which is better: 9mm or .45? Is 40S&W really that much better than 9mm? Or are all the calibers peashooters compared to the hand cannon 10mm?
Put multiple on your keys, show the boys what caliber you trust your life with :D
Transaction
Created
1 month ago
Content Type
Language
application/zip
English
96-15
96-15-AR-Grip
96-15 AR-15 Grip: FFFTech/FFFTechnology & V8vtwin
A design that mimics the look and feel of the C96 pistol's grip.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 210C
Bed: 55C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 5 - 6
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
2x M5x15 Screws
Accreditations:
V8vtwin: Providing the base design model for me to build off of. The grip panels were the hard part for me,
to which when provided I didn't have to modify them in the slightest.
Jak321: For building and testing the design, as well as printing the grip panels in wood PLA and applying wood finish.
Transaction
Created
1 month ago
Content Type
Language
application/zip
English
Controlling
+2 DM
+2-Dmg-Glock-Mag-Extension
+2 Dmg Glock Mag Extension (Dot Matrix Update): FFFTech/FFFTechnology
Oh lookie here boyos, ye found a weapon mod that adds +2 dmg spec to yer lead launcher.
No doubt this'll help when we raid the Level 9 Dungeon full'a Orcs...
Oh wait, this aint a role playing game...
This is a +2 mag extension for Glock double stack 9x19 NATO caliber mags. The design
features ridging that wraps around the front and sides of the extension to aid in
mag retention within one's grasp when unloading/reloading the pistol. The sides of
extension are thickened for greater durability if/when the mag is dropped onto a
hard surface.
Compatible with Gen 3-4 Glock magazines.
V1.5 Update: Dot Matrix Baseplate Added
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 204C
Bed: 54C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 6
Infill: 36%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 25%
Support X/Y Offset: .34mm
(Block supports for the dot matrix in Cura)
Hardware Needed:
1x Compatible OEM Mag Body (Such as: Gen 3 G17 mag, or a Gen 4 G19 mag)
1x Standard Length Mag Spring
1x Standard OEM Floorplate (For compressing the mag spring when assembling/disassembling)
Transaction
Created
1 month ago
Content Type
Language
application/zip
English
PICAT
Picatinny-Mount-Template-(4mm-Bolt)
Picatinny Mount CAD Template V1.1 (4mm Bolt): Laffs Dynamics
STL and STEP files of an accessory mount template that attaches to 1913 Picatinny rails. I
designed this model myself for developing accessories for modern carbines and the like.
These files are intended to aid in firearm accessory design. Whilst they can be 3D printed,
they're mainly meant to be used in CAD software such as Fusion 360.
Update V1.1: Tightened tolerances on the picatinny channel.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 3
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
Hardware Needed:
1x M5x30 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
Accreditations:
Internetpizza: Aided in testing fitment between picatinny rail and the mount template. Gave data on fitment errors
with previous designs, that led to a mass update of most previous design releases. Led to the publishing of this
template version.
Transaction
Created
1 month ago
Content Type
Language
application/zip
English
SHARK
Shark-Fin-M-Lok-Handstop
Shark Fin M-Lok Handstop: Laffs Dynamics
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 26%
Print the handstop upside down.
Hardware Needed:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Transaction
Created
1 month ago
Content Type
Language
application/zip
English
ROOK
Rook-Micro-VFG
Rook Micro M-Lok VFG: FFFTech/FFFTechnology
A micro VFG, designed for compact PDWs such as:
*Sig MCX Rattler
*MP5K (if using M-Lok Handguard)
*CZ Scorpion EVO 3 S2 Pistol Micro
*Ruger PC Charger
Also the design works well for AK "Kink" builds that use M-Lok forends, as the insertion/removal of mags can be
difficult with a full sized foregrip.
Comes in three varieties:
*Standard
*Chess Tiled
*Ridged
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 4 - 5
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
Print the VFG right-side up
Hardware Needed:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Transaction
Created
1 month ago
Content Type
Language
application/zip
English
UAMD-
UAMD_1_Srtd
UAMD-1-Srtd: Laffs Dynamics
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 50%+
I'm sure someone out there would question adding serrations to an undetectable polymer dagger design.
I'll be blunt, if you don't kill a fucker with an initial stab, perhaps sawing into their flesh will help the process along. It's not about long lasting
durability.
It's about finishing the job.
Transaction
Created
1 month ago
Content Type
Language
application/zip
English
AMPOL
AMPoly-Single-Mag-Carrier-V1.5
AMPoly Series: Single Mag Carriers V1.5: FFFTech/FFFTechnology
The first of several designs of the AMPoly Series Mag Carriers. This version features single carriers
that can be clipped on/off a standard 1.5in belt, without said belt's removal.
Belt Clips come in two versions:
*Standard
*Thicc
Update 1.5.1: Lancer L5AWM AR-15 magazines have been documented to be compatible with the AR-15 Mag Carrier.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 208C
Bed: 54C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4
Infill: 32%
Infill Pattern: Gyroid
Material Flow: 100%
Adhesive Used: Clear Gorilla Glue (Not Superglue)
Assembly Directions:
1) Use sandpaper to roughen the tabs of the belt clip.
2) Apply Clear Gorilla Glue to the tab index slots of the mag carrier.
3) Clamp the belt clip to the carrier. Be sure the clip is parallel to the side of the carrier.
4) Wipe away adhesive squeeze-out.
5) Let the adhesive set for 2 hours clamped. Full cure time 24 hours. (But after the 2, I doesn't need to be clamped.)
Notes:
Note 1) The AMPoly Series is designed for Magpul AR-15 mags, and double stack Glock mags. (Glock mag carrier tested with
Glock OEM, Magpul, and KCI mags.)
Note 2) The use of Clear Gorilla Glue was chosen to reduce design weight and hardware usage. (Basically no screws needed)
From testing, the plastic clips will snap before the bond to the carrier fails, should the adhesive be applied properly.
Transaction
Created
1 month ago
Content Type
Language
application/zip
English
MIN-X
Min-XL-Pistol-Brace
Min-XL Pistol Brace: Laffs Dynamics
An extra long variant of the original Laffs Dynamics Min Pistol Brace, for people with larger forearms.
This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 38%
Hardware Needed:
1x M8x12 Hex Socketed Set Screw
Transaction
Created
1 month ago
Content Type
Language
application/zip
English