You can buy and download the finished model here:
https://cults3d.com/en/3d-model/game/eurofighter-wingspan-1m-with-equipment-from-motionrc
This is the second prototype.
Modelldata:
Wingspan: 1m
Engines: 2x Freewing 70mm impellers
ECS: 2x 80A
Servos: Freewing Standard 9g
Battery: 7000mAh 6S
Servos for landing gear: Freewing Standard 4.1mm
Material for printing: LW-PLA, PLA, PETG
...
https://www.youtube.com/watch?v=GwpOA8mnXcg
This will be a model to 3d print.
Wingspan: 1m
Weight: about 4kg
Engines: 2x Freewing 70mm impellers
ECS: 2x 80A
Servos: Freewing Standard 9g
Battery: 7000mAh
Servos for landing gear: Freewing Standard 4.1mm
Material for printing: LW-PLA, PLA, PETG
...
https://www.youtube.com/watch?v=rYTIhnYyagY
Raspberry Pi 3 Modell B
Framevergleich von PiTFT 3.5 Zoll mit Framebuffer gegen WaverShare 3.5 Zoll HDMI Display
...
https://www.youtube.com/watch?v=16YkkMFzEiE
Pay and Download the mods cockpit and flaps (not landing gear)
https://cults3d.com/en/3d-model/game/freewing-me-262-cockpit-and-flaps
These parts are designed to fit the Me 262 by Freewing.
The content is the cockpit, including the pilot and the molds for the canopy and the flaps as arch flaps.
Because of the high level of detail, all parts of the cockpit and the pilot can only be printed using the SLA method or using the FDM method with a nozzle diameter of 0.2 mm using standard PLA.
The flaps can be printed using the FDM process with a nozzle diameter of 0.4 mm and LW-PLA.
In order to be able to manufacture the hood, the corresponding negative mold must first be printed out and then prepared accordingly in the GRP manufacturing process and then manufactured.
If desired, a hood for 3D printing is also part of the package.
For the glass for the hood, the deep-drawing mold has to be printed and ground and then deep-drawn with a 0.6mm PETG plate in the oven.
...
https://www.youtube.com/watch?v=JAH42mGpKOs
You can buy and download the finished model here:
https://cults3d.com/en/3d-model/game/eurofighter-wingspan-1m-with-equipment-from-motionrc
Modelldata:
Wingspan: 1m
Material for printing: LW-PLA and PLA or PETG
You can buy the equipment from MotionRC:
Engines: 2x 70mm impellers
ECS: 2x 80A
Servos: 10x Freewing Standard 9g
Battery: 6000 - 7000mAh 6S
Servos for landing gear: 3x Freewing Standard 4.1mm
A detailed list is in the guide.
Music is from Zakhar Valaha Music
Price of Freedom
https://www.youtube.com/watch?v=CJLTMV8UsEQ
Freewing,3d print,print,drucken,rc,Eurofighter,LW-PLA,3d printed,CAD,printed,design,modell,model,3d,Jet,Catia V5,Design,engineering,homebuild,hobby,LW PLA HT,light weight,ducted fan,airbrush,radio controlled,construction,Typhoon,how to make,plane,fighter,DIY,Flight
...
https://www.youtube.com/watch?v=wace9fw394s
This is a model to 3d print.
Wingspan: 1.06m
Weight: about 4kg
Engines: 2x Freewing 70mm impellers
ECS: 2x 80A
Servos: Freewing Standard 9g
Battery: 7000mAh
Servos for landing gear: Freewing Standard 4.1mm and 5.1mm
Material for printing: LW-PLA, LW-PLA-HT, Carbon-PLA, Carbon-PETG
Music:
Zakhar Valaha Music - price-of-freedom
...
https://www.youtube.com/watch?v=jNHAUw2k-qs
You can buy and download the finished model here:
https://cults3d.com/en/3d-model/game/eurofighter-wingspan-1m-with-equipment-from-motionrc
This will be a model to 3d print.
Wingspan: 1m
Weight: about 4kg
Engines: 2x Freewing 70mm impellers
ECS: 2x 80A
Servos: Freewing Standard 9g
Battery: 7000mAh
Servos for landing gear: Freewing Standard 4.1mm
Material for printing: LW-PLA, PLA, PETG
...
https://www.youtube.com/watch?v=y1hgchZ35DA