Today I am showing you ColorFabb_HT filament! It's an interesting material for prints that need to be rugged and able to withstand up to 100C temperatures. I bought some a while ago and decided to see if I could dial it in and use it to print a part cooling fan duct that sits up close to the E3D v6 hotend!
I did all of my test prints using Simplify3D and my Ultimaker 2+.
I found I got my best results with a first layer at 255C and the rest at 251C. Part Cooling fan was set to 25%. Bed was set to 110C.
While the suggested retraction distance and speeds work well (4.5 mm and 40 mm/s, I found a distance of 5.1 mm was the sweet spot for my printer!)
ColorFabb HT website:
https://ht.colorfabb.com/(This video was not sponsored by ColorFabb or any of their vendors. I paid for this filament and have been having fun learning to print it well!)
Enjoy the short blooper reel at the end!
Don't forget our Web Forums!
http://www.3dprintingforum.us/Thanks for watching and please Subscribe!
⭐ Support me and my Channel with a Donation! ⭐
https://www.paypal.me/wherenerdyiscoolSupport me on PATREON!
https://www.patreon.com/wherenerdyiscoolSave money with these Coupon Codes!
Want to save some money on your next FolgerTech purchase? Use WHERENERDYISCOOL coupon code at checkout!
Also use Coupon Code "NerdyisCool" for 15% off at ZYLTech!
...
https://www.youtube.com/watch?v=cMm9OEWmR1I