#Shorts 3d printed Eurofighter Typhoon wingspan 1m, first prototyp, designed for LW-PLA
This will be a model to 3d print. Wingspan: 1m Weight: about 4kg Engines: 2x Freewing 70mm impellers ECS: 2x 80A Servos: Freewing Standard 9g Battery: 7000mAh Servos for landing gear: Freewing Standard 4.1mm Material for printing: LW-PLA, PLA, PETG ... https://www.youtube.com/watch?v=DDjpyIEO-nA
You can buy and download the finished model here:
https://cults3d.com/en/3d-model/game/3d-printed-su-27-flankerwith-equipment-from-motionrc
This is a model to 3d print.
Wingspan: 1.062m
Weight: 4150g
Engines: 2x Freewing 70mm impellers
ECS: 2x 80A
Servos: Freewing Standard 9g and 4g
Battery: 7000mAh
Servos for landing gear: Freewing Standard 5.1mm and 4.1mm
Material for printing: LW-PLA, LW-PLA-HT, Carbon-PLA, Carbon-PETG
Music:
Zakhar Valaha Music - price-of-freedom
...
https://www.youtube.com/watch?v=CWd9HOAJUUA
You can buy and download the finished model here:
https://cults3d.com/en/3d-model/game/eurofighter-wingspan-1m-with-equipment-from-motionrc
This will be a model to 3d print.
Wingspan: 1m
Weight: about 4kg
Engines: 2x Freewing 70mm impellers
ECS: 2x 80A
Servos: Freewing Standard 9g
Battery: 7000mAh
Servos for landing gear: Freewing Standard 4.1mm
Material for printing: LW-PLA, PLA, PETG
...
https://www.youtube.com/watch?v=PvkAxtBFmmo
You can buy and download the finished model here:
https://cults3d.com/en/3d-model/game/eurofighter-wingspan-1m-with-equipment-from-motionrc
This is a second prototype.
-improve performance
-weight reduction of 750g through optimization of the construction and the printing process
-current flight weight is 4050g
-improve the aerodynamics of the wings
Modelldata:
Wingspan: 1m
Engines: 2x Freewing 70mm impellers
ECS: 2x 80A
Servos: Freewing Standard 9g
Battery: 7000mAh 6S
Servos for landing gear: Freewing Standard 4.1mm
Material for printing: LW-PLA, PLA, PETG
...
https://www.youtube.com/watch?v=HR46j0_8I3s
This will be a model to 3d print.
Wingspan: 1.06m
Weight: about 4kg
Engines: 2x Freewing 70mm impellers
ECS: 2x 80A
Servos: Freewing Standard 9g
Battery: 7000mAh
Servos for landing gear: Freewing Standard 4.1mm and 5.1mm
Material for printing: LW-PLA, LW-PLA-HT, Carbon-PLA, Carbon-PETG or Carbon-Nylon
...
https://www.youtube.com/watch?v=JRWu86TGM7M
Pay and Download the mods cockpit and flaps (not landing gear)
https://cults3d.com/en/3d-model/game/freewing-me-262-cockpit-and-flaps
These parts are designed to fit the Me 262 by Freewing.
The content is the cockpit, including the pilot and the molds for the canopy and the flaps as arch flaps.
Because of the high level of detail, all parts of the cockpit and the pilot can only be printed using the SLA method or using the FDM method with a nozzle diameter of 0.2 mm using standard PLA.
The flaps can be printed using the FDM process with a nozzle diameter of 0.4 mm and LW-PLA.
In order to be able to manufacture the hood, the corresponding negative mold must first be printed out and then prepared accordingly in the GRP manufacturing process and then manufactured.
If desired, a hood for 3D printing is also part of the package.
For the glass for the hood, the deep-drawing mold has to be printed and ground and then deep-drawn with a 0.6mm PETG plate in the oven.
...
https://www.youtube.com/watch?v=JAH42mGpKOs
Flug und Landung mit meiner komplett selbst gebauten TA 152 im Maßstab 1:12 bei Berlin in 3D, gefilmt mit meiner selbstgebauten 3D Kamera mittels zweier Wingcams von HobbyKing.
Spannweite:1,20m
Gewicht:950g
Maßstabsgetreues Einziehfahrwerk
Rumpf und Tragfläche sind aufgebaut in Sandwichbauweise mit GFK und Honigwabe in einer Negativform.
...
https://www.youtube.com/watch?v=ysz0xHOC9Rw
You can buy and download the finished model here:
https://cults3d.com/en/3d-model/game/eurofighter-wingspan-1m-with-equipment-from-motionrc
This will be a model to 3d print.
Wingspan: 1m
Weight: about 4kg
Engines: 2x Freewing 70mm impellers
ECS: 2x 80A
Servos: Freewing Standard 9g
Battery: 7000mAh 6S
Servos for landing gear: Freewing Standard 4.1mm
Material for printing: LW-PLA, PLA, PETG
...
https://www.youtube.com/watch?v=UKazAnXvOXA
The aim of this project is to bring the main landing gear of the Freewing SU-35 closer to the original landing gear of the SU-35 in terms of its functionality.
In this video i will show you the functionality of retractable main landing gear in action.
Pay and Download:
https://cults3d.com/en/3d-model/game/freewing-su-35-maingear-mod
The landing gear and its servo are still used.
You also need:
- 2x Servo H-King HKM 282A or similar
- 2x Servo Turnigy TSS 11MGB or similar
- 4x Ball joint head diameter 3mm
- 16x M3 nuts
- 8x ISO 10642 M3x10
- 8x ISO 10642 M3x18
...
https://www.youtube.com/watch?v=hbuVuLZXVuk