If you’re experiencing a humming/whearing noise as you drive which is speed-dependent, your vehicle very possibly has a failed wheel bearing. In this video, I should how I replaced the front wheel bearing on my 2001 BMW E39 525i.
This is the perimeter trail at Bluff Creek OHV park. This OHV park reminds me of the hill climb sections in the old PlayStation 2 game MX vs. ATV Unleashed. (That game also has the best soundtrack ever).
...
https://www.youtube.com/watch?v=tKbivKzBo78
Here is the first look at some rough data about the pressure inside the intake manifold, the results aren't quite what I thought they would be. I had already planned to do more tests but now I see that I'll need to do a lot of cross-referencing between different measures.
This is an unofficial part of the Magnesium Valve Cover Conversion project series I am doing on the N52 engine. To see more about the project, check out the playlist here:
https://www.youtube.com/playlist?list=PLCDi9r604qsOpU224SU3JwXw7b3YDCfLZ
...
https://www.youtube.com/watch?v=oYAJrlMsCn8
This $7 block plane needs some cleaning up. Lets restore it!
If you know anything about the tool company “Samson” please help to inform me and everyone else in the comments section!
Check out my other random videos here: https://www.youtube.com/playlist?list=PLCDi9r604qsOmvn6OJR7qZeSSbS3L1Y2R
0:00 - The Introductory Intro
1:32 - Disassembly and cleaning
15:20 - Sanding/lapping for flatness
21:14 - Blade sharpening
29:36 - Buffing/polishing
30:27 - Reassembly
31:25 - The final results
32:11 - Test cuts and The End
...
https://www.youtube.com/watch?v=GyauTvVup64
A belt sander with a sticky belt is hardly a belt sander at all!
Check out my other miscellaneous videos here:
...
https://www.youtube.com/watch?v=FfR2nHBVX3E
Here is how I installed the Race Tech Gold Valve kit on my 2020 CRF250L.
After the Öhlins rear shock, this made the most difference to the handing of the bike and I would never go back to stock. It's worth every penny.
Sorry for this video being a little more low-effort compared to my usual videos. I've been really busy with work and haven't had much time for making vides, sadly.
0:00 - Taking Junk Apart
3:42 - Technical Explanation
7:27 - Putting Junk Back Together
...
https://www.youtube.com/watch?v=xKTASWmyB6M
Upgrade Mini-Series:
Part 1/3: https://youtu.be/NaxkAfzXhHI
Part 3/3: Not released yet.
This is part 2/3. In this video, I build the new upgraded crossover. It is important to use the stock values for all the components from the original crossover unless you have the ability to measure the change in the frequency response as you change the values of the components.
The total cost of the new crossover will be around $100 USD. This includes the ABS mounting board, silicone insulated wiring, inductors, capacitors, and resistors, and zip-ties.
Check out my other speaker videos here: https://www.youtube.com/playlist?list=PLCDi9r604qsNKWj5mxYVOxTTPhBbhUS7D
...
https://www.youtube.com/watch?v=qlj8KTWNyVE
Watch and cringe while I struggle to complete a simple task.
This is a classic lesson in why you shouldn't compensate for a lack of sleep with lots of caffeine.
...
https://www.youtube.com/watch?v=88LCcRzcuPQ
2020 CRF250L
30 May 2021 - 237 miles covered on day three
The Minnesota Trans-Wisconsin Adventure Trail (MN’T.W.A.T.) is an 900 mile adventure route of my own creation. Join me on my first camping trip for 2021; also my first motocamping trip ever. This will be a four day adventure ride that will for through, Souther Minnesota, Western Wisconsin, and the Arrowhead Region of Northern Minnesota.
GPS/Maps day 3:
Opt. A: https://goo.gl/maps/GNwZ7derUMd9WFiU6
Opt. B: https://goo.gl/maps/JYiPduBfgTjhztnS8
Day three starts at my campsite just outside the BWCA. This day was dramatically cut short by bad weather coming in. I decided to accomplish my goal of reaching Brule Lake despite the weather but elected not to go the longer route back to Danbury. Instead, I took Hwy 61 down the north shore directly to Duluth. With temps in the low 40’s and a strong head wind, it was not a pleasant ride. Thankfully it did clear up once I reached Duluth so the ride back to Danbury was nowhere near as bad.
Check out my other travel videos here: https://www.youtube.com/playlist?list=PLCDi9r604qsN6slUhwne32UeiDDX-EhoP
Check out my other motorcycle videos here: https://www.youtube.com/playlist?list=PLCDi9r604qsO271NPV2BdLf-0llnmtpzp
...
https://www.youtube.com/watch?v=71I61wQwD5w
Tool bag video: https://youtu.be/kLXOEg5UAC0
Here’s the easy process of cleaning a motorcycle chain when you’re not in the comfort of your home shop. Did I mention that it’s pretty easy? Just get the right tools and it can be done in about 5 minutes!
Check out my other motorcycle videos here: https://www.youtube.com/playlist?list=PLCDi9r604qsO271NPV2BdLf-0llnmtpzp
...
https://www.youtube.com/watch?v=-hyzEXKftsc