Chapters: 00:00 Hello 00:20 which kit i builded 01:25 inconsitency 01:40 goal and upgrades 02:40 parts of the series and I used 03:50 first prints 06:28 cube with input shaper 07:19 SD-card box 08:15 moving axes - soundtest 09:25 pictures from the build 09:38 box it arrived 10:14 helper for the Z! 11:07 M3 nut helpers 12:28 problems summary 13:50 almost finished frame - cable chain (wrong) 14:40 Z-Axes microswitch failure 15:41 finished frame incl electronics 16:12 USB/LAN Pi Zero 2W HAT 16:22 FYSETC Mainboard TMC2208 16:40 first power on and smaller mistakes i made 17:20 tips hints what i don´t like 18:30 Testprint soundcheck 22:20 speed 1x TopLayers 23:50 Detailed part pictures 25:30 input shaper 26:04 Upgrades 27:20 thanks for your support ... https://www.youtube.com/watch?v=vLV4MNb-uHo
It started simple, I thought, but at the end, a day was gone! I had to change the entire nozzle, after several attempts to "rescue" the old one . And old is relativ. I have not that much printed with it, if I compare it with standard brass nozzle I have in my other printers. The price is a different things.
So I hope that this is not neccesary every 4 weeks!
Thanks for supporting me via Patreon: https://www.patreon.com/dm4ds
Link to the printable label on my website from the "HACK" Video:
https://www.dm4ds.de/wp/bambulab-pei-cheat-sheet-label/
C U in the next one
Sandor
DM4DS
My social Media Links:
Patreon: https://www.patreon.com/dm4ds
Paypal donation: https://paypal.me/dm4ds
Amazon Affiliate Link: https://amzn.to/31TI1FC
Buy me a coffee: https://buymeacoff.ee/dm4ds
Epidemicsound: https://share.epidemicsound.com/mfn3jd
Twitter: https://twitter.com/HAM_DM4DS
Instagram: https://www.instagram.com/dm4ds/
https://www.printables.com/de/social/461183-dm4ds/about
Thangs: https://thangs.com/DM4DS
QRZ.com: https://www.qrz.com/lookup/DM4DS
Twitch: https://www.twitch.tv/dm4ds
Discord Server: https://discord.gg/xSzfBCyXCZ
Homepage: https://www.dm4ds.de/
#bambulab #broken #3dprinting
...
https://www.youtube.com/watch?v=FDWuohDh3NU
"Someone" has send me a quad while it fly "strange"
Here we are. Was on our flying field @fmv kraichtal, flying and was surprised about the quad reactions....but watch and see. The footage is DJI AirUnit Video, onboard recording 1080p.
For a short period the video freezes, maybe the SDCard was faulty but the more important things are happening in the Blackbox .
Enjoy watching and yes, the problem is fixed.
The FC/ESC was mounted too close to the frame and "bounced" in fast maneuvres to the frame, causing the FC to "correct". mounted stand-offs and the quad flys excellent. The owner is happy, so me too.
vy73
Sandor
DM4DS
Homepage: https://www.dm4ds.de/
Twitter: https://twitter.com/HAM_DM4DS
Instagram: https://www.instagram.com/dm4ds/
Patreon: https://www.patreon.com/dm4ds
Thingiverse: https://www.thingiverse.com/dm4ds/
QRZ.com: https://www.qrz.com/lookup/DM4DS
...
https://www.youtube.com/watch?v=_b4_PZI-ziI
Hello and welcome back.
Need 1k subscriber for live mobile streaming!
please subscribe and don´t forget the bell.
Hope you can see, as I can feal, the improvements from video to video, as I may upload more in the next days/weeks while I´m flying to get sticktime.
I know, not super fancy but thats the way to be a better pilot. Sticktime, Sticktime and in future fly a bigger quad, but not on my small ground.
4" and 5" DJIs are already build but no testflight yet- Subscribe that you don´t miss the maidens!
Enjoy and thanks for subscribe.
More is coming.
Thanks
Sandor
DM4DS
You can also follow me on Twitter: https://twitter.com/HAM_DM4DS
Patreon welcome for projects: https://www.patreon.com/dm4ds
some other projects you find on QRZ.com: https://www.qrz.com/lookup/DM4DS
Thingiverse to my projects: https://www.thingiverse.com/dm4ds/
New also to Instagram: https://www.instagram.com/dm4ds/
Just for statistics: ATM 360 follower
...
https://www.youtube.com/watch?v=jTJUTwJTM_c
Amazing how elegant this giant 5.1m Falke is flying. With it´s ZG-45cc motor with e-starter, it is Independent.
Recorded at the FMV-Kraichtal RC Flying field.
Thanks for supporting me via Patreon: https://www.patreon.com/dm4ds
Greetings
Sandor
DM4DS
My social Media Links:
Patreon: https://www.patreon.com/dm4ds
Paypal donation: https://paypal.me/dm4ds
Amazon Affiliate Link: https://amzn.to/31TI1FC
Buy me a coffee: https://buymeacoff.ee/dm4ds
Epidemicsound: https://share.epidemicsound.com/mfn3jd
Twitter: https://twitter.com/HAM_DM4DS
Instagram: https://www.instagram.com/dm4ds/
Thingiverse: https://www.thingiverse.com/dm4ds/
Thangs: https://thangs.com/DM4DS
QRZ.com: https://www.qrz.com/lookup/DM4DS
Twitch: https://www.twitch.tv/dm4ds
Discord Server: https://discord.gg/xSzfBCyXCZ
Homepage: https://www.dm4ds.de/
#fpv #glider #towing
...
https://www.youtube.com/watch?v=T8oi14YDAkA
The Behringer CS400 is a bang for the buck product, BUT
If you use it with a 9V internal battery it is a permanent empty nightmare.
Mine and the one from my friend Friedrich, DJ9FT was almost everyday dead with a drained down battery to 7V sometimes even lower. And open it each time after using to disconnect the 9V Block battery? NO
So a solution must be found, The video shows in a simple way how to do it. YOU CAN DO IT!
enjoy watching and here some affiliate Links:
Behringer CS400: https://amzn.to/3sNaSWq
Switches 2port on/on: https://amzn.to/3MyMWgZ
24AWG silicone wires: https://amzn.to/3NugLzC
Weller solderstation: https://amzn.to/3MyU3WX
Massive thanks for supporting me via Patreon: Patreon: https://www.patreon.com/dm4ds
Greetings
Sandor
DM4DS
My social Media Links:
Patreon: https://www.patreon.com/dm4ds
Paypal donation: https://paypal.me/dm4ds
Amazon Affiliate Link: https://amzn.to/31TI1FC
BMAcoffee: https://buymeacoff.ee/dm4ds
Epidemicsound: https://share.epidemicsound.com/mfn3jd
Twitter: https://twitter.com/HAM_DM4DS
Instagram: https://www.instagram.com/dm4ds/
Thingiverse: https://www.thingiverse.com/dm4ds/
Thangs: https://thangs.com/DM4DS
QRZ.com: https://www.qrz.com/lookup/DM4DS
Twitch: https://www.twitch.tv/dm4ds
Discord Server: https://discord.gg/xSzfBCyXCZ
CopterUni A2: https://kurs.copteruni.de/?ref=3a0ca5
Homepage: https://www.dm4ds.de/
#behringer #cs400 #modification
...
https://www.youtube.com/watch?v=5hVB0e4mbb8
Directors Cut :)
The first upload had 3 little "jumps" in the video and while there is no function to replace a video, I uploaded it again.
__________________________________________________________________________________________
Hello and welcome back to my channel.
This video shows the "standard" modification of a MEGASAT Twin Gold LNB v3 with NXP chip. While the LNB has a "butterfly oscillator" and needs for best performance a 0° + 180° Phase Signal, it is necessary (easiest mod) to use a balun. All about the balun you see and read in the video.
After the modification don´t forget to put new sealed to the LNB to keep it safe from negativ influences. I do this with high temperatur sealed from our Car store. Not the cheapest but it works perfect. If you need more info about that, write in the comments.
Thanks for following my channel + hit the bell do get notifications about new uploads. Have fun watching.
You can also follow me on Twitter: https://twitter.com/HAM_DM4DS
Patreon welcome for projects: https://www.patreon.com/dm4ds
some other projects you find on QRZ.com: https://www.qrz.com/lookup/DM4DS
Thanks for all.
Sandor
DM4DS
...
https://www.youtube.com/watch?v=WOBfAt81-jI
Hello and welcome back.
please subscribe and don´t forget the bell :)
After repairing one motor as shown in the last video (https://youtu.be/ZO5daNIJxJk ), I´m pracising on my small ground to get better.
Hope you can seey as I can feal, the improvments from video to video, as I may upload more in the next days/weeks while I´m flying to get sticktime.
I know, not super fancy but thats the way to be a good pilot. Sticktime, Sticktime and in future fly a bigger quad, but not on my small ground.
4" and 5" DJIs are already build but no testflight yet- Subscribe that you don´t miss the maidens!
Enjoy and thanks for subscribe.
More is coming.
Thanks
Sandor
DM4DS
You can also follow me on Twitter: https://twitter.com/HAM_DM4DS
Patreon welcome for projects: https://www.patreon.com/dm4ds
some other projects you find on QRZ.com: https://www.qrz.com/lookup/DM4DS
Thingiverse to my projects: https://www.thingiverse.com/dm4ds/
New also to Instagram: https://www.instagram.com/dm4ds/
Just for statistics: ATM 344 follower
...
https://www.youtube.com/watch?v=RhHhvzRMSAk
What a fun project . Nostalgia. Wouldn´t it be amazin if this still works in 2023? I´m not sure that this is still compatible with todays mobile net! If you know, please comment.
The LiPos I used: https://amzn.to/40ymbQz
503030 450maH
If you have such an old one , too. And you look for a battery repair. Please contact me: info@dm4ds.de
If you think I earned it, please support me via Patreon, It really helps me out! https://www.patreon.com/dm4ds
The smallest amount makes a huge difference for me!
Enjoy watching - replacing your lipos
Sandor - DM4DS
My social Media Links:
Patreon: https://www.patreon.com/dm4ds
Buy me a coffee: https://buymeacoff.ee/dm4ds
Paypal donation: https://paypal.me/dm4ds
Amazon Affiliate Link: https://amzn.to/31TI1FC
Epidemicsound: https://share.epidemicsound.com/mfn3jd
Twitter: https://twitter.com/HAM_DM4DS
Instagram: https://www.instagram.com/dm4ds/
https://www.printables.com/de/social/461183-dm4ds/about
Thangs: https://thangs.com/DM4DS
QRZ.com: https://www.qrz.com/lookup/DM4DS
Twitch: https://www.twitch.tv/dm4ds
Discord Server: https://discord.gg/xSzfBCyXCZ
Homepage: https://www.dm4ds.de/
Timemarkes:
00:00 Hello
01:00 don´t forget the 1k follower give-away
09:00 1k give-away only for followers
10:00 see you in the next one
#nokia #3110 #repair
...
https://www.youtube.com/watch?v=z1eYdMn259U