Eachine TX06 Split AIO FPV Cam/VTX. Supplied by Banggood
On test today we have this extremely cheap AIO VTX/Camera from Eachine where the "split" in the title means that the VTX doesn't piggyback the camera as in the usual AIO setup. So lets hoook it up and see what we get!
You can find the Sim on Steam here https://store.steampowered.com/app/1331330/CurryKitten_FPV_Simulator/ and if it's already in your Steam library, then this update will download automatically.
The Wiki for instructions, solutions to any known issues and more is here https://github.com/CurryKitten/CurryKitten-Sim/wiki
My GitHub repository for defect tracking is here https://github.com/CurryKitten/CurryKitten-Sim you can take a look at the know issues and ideas for features enhancements here https://github.com/CurryKitten/CurryKitten-Sim/issues
The new 0.49b binaries are also available to download from here https://github.com/CurryKitten/CurryKitten-Sim/releases
As a few people had problems locating the specific builds under the releases, here's a list of them -
Win64 - https://github.com/CurryKitten/CurryKitten-Sim/releases/download/0.49-Beta/CK-FPV-Sim-Win64-049b.zip
Win32 - https://github.com/CurryKitten/CurryKitten-Sim/releases/download/0.49-Beta/CK-FPV-Sim-Win32-049b.zip
MacOS - https://github.com/CurryKitten/CurryKitten-Sim/releases/download/0.49-Beta/CK-FPV-Sim-Mac-049b.app.zip
Linux64 -https://github.com/CurryKitten/CurryKitten-Sim/releases/download/0.49-Beta/CK-FPV-Sim-Linux64-049b.zip
Linux32 - https://github.com/CurryKitten/CurryKitten-Sim/releases/download/0.49-Beta/CK-FPV-Sim-Linux32-049b.zip
Any problems, comment down below, email me at currykittensim@gmail.com or open an issue on the GitHub page.
If you liked this video and want to show your support please feel free to join my Patreon supporters here https://www.patreon.com/CurryKitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it https://www.banggood.com/?p=E81211714085201408XQ
If you want to look at other ways of supporting my channel, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me/
...
https://www.youtube.com/watch?v=xc9y0MaPYyA
This is the Bad ending #1 from Disgaea on the PS2. This is triggered by defeating the Dark Assembly more than 100 times.
More information about this, and other endings, at http://www.game-endings.co.uk
...
https://www.youtube.com/watch?v=SjupURRFFWw
This is the complete ending to the Gamecube game "Eternal Darkness". in order to get this ending you need to play through the game 3 times choosing each of the 3 colours (representing each of the 2 Gods) in the beginning of the game.
More information about this, and other endings is available from http://www.game-endings.co.uk
...
https://www.youtube.com/watch?v=Z8TtxF3-xEs
Being old and lazy, having to unscrew and screw things in multiple times when fixing something feels like hard work. That's what I like about an electric screwdriver. But this one is "smart" it has upgradable firmware and has several modes and methods of operation. Let's check it out.
This screwdriver kit was kindly supplied by Sequre for review, so if you'd like to check out the kit in more detail please consider using the following affiliate link: https://sequremall.com/products/electric-screwdriver?ref=lkmnpe12&variant=43267637215420
Use the code: CurryK for 3% off at checkout!
If you liked this video and want to show your support please feel free to join my Patreon supporters here https://www.patreon.com/CurryKitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it https://www.banggood.com/?p=E81211714085201408XQ
If you want to look at other ways of supporting my channel, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me/
...
https://www.youtube.com/watch?v=VCBETmM75sk
Is this old news about these balancing rods ? I've only just thought about how to balance the props, so hence this video.
Anyway, I was pleasantly impressed by the ebay seller, so thought I'd plug his wares (note: I'm not affiliated in anyway, I'm just a regular customer). If you have other self-tightening prop types, he does a few different types.
Link to the rod I was using is here -
http://www.ebay.co.uk/itm/DJI-Phantom-3-DJI-E310-Self-Tightening-Props-Balancer-Rod-Polished-Version-/141730087976?hash=item20ffc58428
...
https://www.youtube.com/watch?v=QlDDw687qe4
It's a little folding quad that you can fly with your phone - so I put it in my pocket and took it on a few walks with me.
This little quad came from RCMoment, and their (affiliate) link to the product is here - https://goo.gl/FzHCQc
If "folding drone" is a bit on the generic side - it's because it doesn't have any sign of a brand/manufactorer/etc so "folding drone" it is !
If you liked this video and want to show your support - either through subscribing, using an affiliate link, becoming a Patreon supporter or buying a T-shirt, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me/
...
https://www.youtube.com/watch?v=wDqDpA1OoGE
Today we're looking at a VTX from HGLRC with a wide range of power options as well as control via the tramp protocol. But the unique thing about this VTX is that it has a mounting option for both a 30.5mm stack or a 20mm stack. So whether you need a VTX for a 3" or 5" quad, this should have you covered.
This VTX was kindly supplied by HGLRC for review, so please use the (affiliate) link to the product page if you want to take a closer look: https://www.hglrc.com/products/hglrc-zeus-800mw-smart-mounting-20-20-30-30-vtx-for-fpv-racing-drone?ref=nlrq3y-lbgm
If you liked this video and want to show your support please feel free to join my Patreon supporters here https://www.patreon.com/CurryKitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it https://www.banggood.com/?p=E81211714085201408XQ
If you want to look at other ways of supporting my channel, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me/
...
https://www.youtube.com/watch?v=79ugYw5m4mk
Today, I get my hands on an ISDT Q6 Nano charger. Very small, very inexpensive and ISDT is a brand that people seem to love. Let's dig in and find out what it's like.
This charger was kindly supplied by Banggood for review, so please use this (affiliate) link to take a look at the full product details https://www.banggood.com/ISDT-Q6-Nano-BattGo-200W-8A-Colorful-Pocket-Battery-Balance-Charger-for-1-6S-Lipo-Battery-p-1663605.html?p=E81211714085201408XQ&utm_source=Youtube&utm_medium=cussku&utm_content=tanghao&utm_campaign=wayne
It was already pretty inexpensive, but here's a code to make it even cheaper ! use BGQ6Nano1 for 10% off.
There are 100's of power supplies about, depending on your need. Often old laptop PSU's will put out 5A+ so are something that can be converted, but for a simple plug-it-in solution, check out something like https://www.banggood.com/LANTIAN-24V-16_6A-400W-Power-Supply-Adapter-Upgrade-Version-for-ISDT-Q6-Nano-ToolkitRC-M8-Charger-p-1365749.html?p=E81211714085201408XQ&utm_source=Youtube&utm_medium=cussku&utm_content=tanghao&utm_campaign=wayne
Something like this https://www.banggood.com/20cm-20AWG-4_0mm-Banana-Plug-to-XT60-XT30-DC5_5-T-Plug-Charger-Adapter-Cable-for-IMAX-B6-ISDT-Charger-p-1547048.html?p=E81211714085201408XQ&utm_source=Youtube&utm_medium=cussku&utm_content=tanghao&utm_campaign=wayne will save you making up your own cables for different types of lipos.
If you liked this video and want to show your support please feel free to join my Patreon supporters here https://www.patreon.com/CurryKitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it https://www.banggood.com/?p=E81211714085201408XQ
If you want to look at other ways of supporting my channel, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me/
...
https://www.youtube.com/watch?v=fOFSwJRumDw
A single board with two Open Source products. ExpressLRS we already know, but you may not be as familiar with OpenVTX - which is what the VTX part of the board supports. Let's install it on a quad and see how it does.
The product was very kindly sent for review by Gaf who runs the online FPV store YourFPV. You can check out the Fyujon at his shop here https://yourfpv.co.uk/product/elrs-fyujon-2in1-aio-module-built-in-elrs-2-4ghz-ep-receiver-and-openvtx/ and/or check out his main page here https://yourfpv.co.uk/
If you liked this video and want to show your support please feel free to join my Patreon supporters here https://www.patreon.com/CurryKitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it https://www.banggood.com/?p=E81211714085201408XQ
If you want to look at other ways of supporting my channel, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me/
...
https://www.youtube.com/watch?v=KXSa92oJ8vs