I've been gifted an Amiga 2000 mounted in a PC tower case. This is most of the unedited footage taken from the 1st attempt to power it up. Feel free to hop about.
The Amiga came needing slight repairs.But not a lot of them.
If you like what you see, and want to help out making this sort of development and production possible in the future, please consider a small donation at: https://www.paypal.me/dherrendoerfer This helps a lot in keeping the channel and its content free and un-influenced. ... https://www.youtube.com/watch?v=Jhqh2P5mJWc
Eine Testfahrt den Monte Baldo hinauf, soweit der Akku kann.
A test ride up Mt. Baldo as far as the battery will take me.
Diese Testfahrt sollte zeigen, wie viele Hoehenmeter erreichbar sind, es geht ueber verwinkelte Strassen, von Torbole aus den Berg hinauf, bis der Akku auf 20% gefallen ist (Ein Balken an Display). Dann geht es wider zurueck nach Torbole, ueber Nago, und wieder an den Startpunkt.
This test drive was to find out how much altitude you can gain on a winding road up the hill of Mt. Baldo. Starting at Torbole, we'll keep going until we get below 20% battery charge (one bar on the display) then we'll turn back and head back, passing through Nago on the way back to our starting point.
Am Ende der Tour war ich sehr ueberrascht, wie gut die Energie-Rueckgewinnung funktioniert hatte. Der Akku war wieder 50% voll. Im Endeffekt hat der miniPro so genau die beworbene Distanz pro Ladung realisiert.
I was very surprised by how efficient the energy recovery worked on the way down the mountain. The battery gauge read 50% charge available. The miniPro managed to edge out the advertised riding distance per charge exactly.
Tour Data:
Hoehenmeter / Altitude gained: 530m
Tour Laenge / Tour distance: 15.5km
Akkustand am Ende / Remaining battery: ~50% (14km)
Durchschnittl. Geschwindigkeit / Average Speed: 8km/h
Music:
0:46: EDM Detection Mode by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1500026
Artist: http://incompetech.com/
6:50: The Boy Got Skills by Max McFerren
15:53: Lonely Troutman II by William Rosati
21:21 Sunspots by Jeremy Blake
27:01 Rollin With The Flow by Max McFerren
34:02: Drone in D by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1200044
Artist: http://incompetech.com/
...
https://www.youtube.com/watch?v=UbdPY8mvSwY
Opening or closing thoughts on each work item I tackle while building the Big Bad Robin 3D Printer prototype.
...
https://www.youtube.com/watch?v=iO8HP9M6Fk4
I seem to be stuck with loads of already cut counterfeit WS2812 LED strips. Let's make something of them.
Link to project on github.com coming soon .
...
https://www.youtube.com/watch?v=k1CNxYU7ulg
I bought the cheapest 80W laser on eBay. Let's see how this Adventure turns out.
I will try to document every day (with an update) of my quest to put the cheapest 80W laser on eBay to work. I'll report on the pros and cons and on any additional purchases required.
Day 1: Today I made the purchase
Day 2: I got shipping confirmation (that was fast!)
Day 3: Got the call: delivery tomorrow !!
Day 4: It's been delivered. It's unpacked and it all there !!!!
Day 5: Bodybuilding, a backache, tight corners and a cut !!
Day 6: Cleaning, painting, fine tuning
--- on day 7 Dirks wife told him to clean the mess up that was the lasers trail to the workshop, or all hell would break loose. So he did. ---
Day 8: Let's make something !
For your reference, this is the item on eBay:
https://www.ebay.de/itm/80w-lasergraviermaschine-engraving-Gravurmaschine-700x500mm-CO2-USB-best/392169805192
If you like what you see, and want to help out making this sort of development and production possible in the future, please consider a small donation at:
https://www.paypal.me/dherrendoerfer
This helps a lot in keeping the channel and its content free and un-influenced.
...
https://www.youtube.com/watch?v=g8g1mPwu0Dc
Review of the LOTMAXX SC-10. A new contender in the sub $300 market.
We've already unboxed it and put it together. Let's see if it also prints well.
The SC-10 is a neat package from what it promises
- 235x235x280mm print size
- 24V internal power supply
- 200+W Heated print bed
- Silent operation
- Resume capability, Filament break detection
- 3.5" Hi-res display
If you like what you see, and want to help out making this sort of development and production possible in the future, please consider a small donation at:
https://www.paypal.me/dherrendoerfer
This helps a lot in keeping the channel and its content free and un-influenced.
German disclaimer:
Dieses Video wurde mit freundlicher Unterstützung von LOTMAXX erstellt.
...
https://www.youtube.com/watch?v=qU4NjcaegL8
The 'Upgraded 3018 Pro Offline CNC Engraver' from Bangood.com has finally made it's way into my workshop, it's been a long wait, but it was worth it.
This is the test subject: https://ban.ggood.vip/XnKC
I've had a small CNC for a long time now, and I've been dreaming of an upgrade for some time. Not a big update, but just some small things like a better chuck, offline control, and a slightly larger work area.
This kit is it - All the things I wanted, and the price is good too. Recently the prices have dropped a lot, and the out-of-stock situation has very much improved.
The 'Upgraded 3018 Pro Offline CNC Engraver' was kindly provided by banggood.com for this video. Thank you very much.
German disclaimer:
Dieses Video wurde mit freundlicher Unterstützung von banggood.com erstellt.
...
https://www.youtube.com/watch?v=0Zx9C_fd9zA
I bought the cheapest 80W laser on eBay. Let's see how this Adventure turns out.
I will try to document every day (with an update) of my quest to put the cheapest 80W laser on eBay to work. I'll report on the pros and cons and on any additional purchases required.
Day 1: Today I made the purchase
Day 2: I got shipping confirmation (that was fast!)
Day 3: Got the call: delivery tomorrow !!
Day 4: It's been delivered. It's unpacked and it all there !!!!
For your reference, this is the item on eBay:
https://www.ebay.de/itm/80w-lasergraviermaschine-engraving-Gravurmaschine-700x500mm-CO2-USB-best/392169805192
If you like what you see, and want to help out making this sort of development and production possible in the future, please consider a small donation at:
https://www.paypal.me/dherrendoerfer
This helps a lot in keeping the channel and its content free and un-influenced.
...
https://www.youtube.com/watch?v=1LDFFDA3-dU
I'm changing the original ANET A8 Plus extruder for a 37 Euro Titan-Extruder Clone kit.
What can go wrong ? It must be a drop in replacement - maybe.
But ... the results justify the work and cost.
Enjoy !
If you like what you see, and want to help out making this sort of development and production possible in the future, please consider a small donation at:
https://www.paypal.me/dherrendoerfer
This helps a lot in keeping the channel and its content free and un-influenced.
...
https://www.youtube.com/watch?v=pkZHVVbMZr8