TBI to Turbo Dodge Daytona - Part 3 - Engine Install
Getting the engine thrown into the Daytona with a few clips of the install and other random crap.
Index: 0:00 - Moving the radiator 2:20 - View of the TBI Trans 3:04 - Fuel system upgrade 4:45 - Getting the engine and trans together 11:30 - Installing the engine 15:20 - Building the fan shroud 23:48 - Installing the wiring harness 25:10 - End Cards
#Shorts
Doing the wrong thing the right way. Lowering the Daytona by cutting the springs and installing new struts.
...
https://www.youtube.com/watch?v=3-5_ur2E53M
Doing the wrong thing the right way. Enjoy this quick video of us cutting down some coil springs in a pseudo ASMR fashion.
Index:
00:00 - Intro
00:48 - Tear down ASMR
01:14 - Release the spring
02:45 - Cut the spring
03:45 - Assembly ASMR
05:20 - Results
06:47 - Outro
#Mopar #ASMR
...
https://www.youtube.com/watch?v=P4QnmwdhMQ0
My friend DJ and I go to get the Red Daytona inspected so he can get to driving it on the road.
It was a really fun journey and you can see the build log here:
http://www.turbododge.com/forums/f4/f279/1031825-1989-dodge-daytona-es-2-5-a.html
The car did surprisingly well.
...
https://www.youtube.com/watch?v=l9-HrrL3jYw
Changed out the really old shocks that barely worked on the old Mopar. Seems to ride a lot smoother now.
...
https://www.youtube.com/watch?v=R42VsdSlT-8
I've been having an issue where the motor rocks back and forth from just daily driving, so after going through 4 sets of stock or filled stock motor mounts it's time to see what 3 solids feels like.
I have an AGP trans solid mount and now two BWoody Performance torque mounts.
Index:
0:07 - Explanation of the video
1:00 - Time lapse of mount install
6:34 - Before solid mounts
7:03 - After install mounts
8:49 - Impressions of new mounts
16:22 - Looking into the engine moving
Forum post talking about this issue:
http://www.srtforums.com/forums/f10/jerky-de-acceleration-468267/index3.html
Motor Mounts Used:
https://www.ebay.com/itm/BWoody-Dodge-Neon-SRT-4-Motor-Mounts-upper-Lower
Music Used:
AKnewGod - Indifferent
https://www.youtube.com/watch?v=zY2OZxXXfBc
DEgITx - Grim Reaper (feat. Matty M.)
https://www.youtube.com/watch?v=2NNtIYmCBGI
...
https://www.youtube.com/watch?v=oM6JsWz_o9U
This is a cheap and easy way to get some pretty good rust removal off of car parts, or any rusty pieces of metal in fact.
The process is pretty simple, add an electrolyte to your water, I use baking soda or washing soda in this case. Connect the negative from the battery charger to the piece of metal you would like to clean. Get a piece of clean metal to use as the sacrifice to the rust gods and connect the positive to it. Make sure to keep the positive cable out of the water solution otherwise it'll collect rust as well. Flip it on a low amps setting such as 2A. Bam, done, now you will just need to wait for some time. Remember, the longer the better.
#DIY #ENGINEBUILDING #TURBOMOPAR
...
https://www.youtube.com/watch?v=DvsUin1NBC4