here do I talk a bit about the Free floating AR15 shroud adapter that I made so there are some more options out there for this platform.
the MKI version for the FGC9, FGC6, FGC68 can be found here
https://www.prusaprinters.org/prints/140291-fgc9-fgc6-fgc68-mki-unw-free-floating-handguard
the MKII /MKISD version for the FGC9, FGC6, FGC68 can be found here
https://www.prusaprinters.org/prints/140323-fgc9-fgc6-fgc68-mkii-mkiisd-unw-free-floating-hand
the SD version for the FGC9, FGC6, can be found here
https://www.prusaprinters.org/prints/140348-fgc9sd-unw-free-floating-handguard
Update: 10-3-2023
anarchy lowers text error fixed
---
the Anarchy edition? this got nothing to do with riots, and destruction and mayhem or other mis info and statist-propaganda like that .
Anarchy means no rulers, no masters. a phrase Mark Passio often uses is: No Masters No slaves. or and slavery one mind at the time! since and I notice this my self. there is no use for 3d printed gun's if you still consciously or sub-consciously mentally enslaved. and feel you have to obey. I mean it's al right to have some fair, so long you don't don't stop doing what is right. stop this system of covert slavery.
if you are lik WTF? then I would recommend looking into the pod cast series from Mark. and start from episode 1! https://www.markpassio.com/podcast
or look into Larken Rose his work is very good as well. like his book: The Most Dangerous Superstition or video's
https://www.youtube.com/watch?v=H6b70TUbdfs&t=46s
to help undo the programming, and the Social engineering from childhood onwards from generation from generation to accept the concept of authority.
——
this lower got the same concept of using a metal rod with a OD of 4mm and 26mm long as with the FGC9 SD, and I have seen if done before by others. it’s fair to say that it would limit the potential of that part to break.
the MKIISD version will hide the metal pin and makes it look like a stock MKII
but with this design you can hide the metal part. it’s up to you if you like that look better or not.
in this video do I show how to use this tool. that saves you some time doing this task.
link to the file can be found here
https://www.thingiverse.com/thing:4900472
here do I tell about the buut stock cover that I made for the Empire Dfender to give a bit more grip on the back
Link to the file
https://cults3d.com/en/3d-model/various/unw-empire-dfender-butt-stock-cover
__
communication group on discord
https://discord.gg/dxR64kMHeT
short PB movies and products photo’s on
instagram @UntangleWORKS
I made a mod to the mag loader I did find that was a bit to easy to push the button.
here will I show how the UNW P90 mag speed loader works. like a lot of other mag loaders do you need a electro hoper for this.
link to the official UNW website
https://www.untangleart.com/unw/
or for more UNW P90 parts
https://www.thingiverse.com/untangle/collections/unw-p90
https://www.prusaprinters.org/social/180009-untangleworks/collections/88913
playlist to the UNW P90 project videos
https://www.youtube.com/watch?v=rIBcPt25NZw&list=PLVTi8DENyyvzFX1qq4oYlBqv93s8JqJPQ
communication group on discord
https://discord.gg/yVqrB7N
short PB movies and products photo’s on
instagram
@UntangleWORKS
for donations a link to Paypal
https://www.paypal.me/dannyhoogesteger
here do I talk a bit what I have in mind for the Mind for the MAGFED FOR ALL Project. if you got a beter name for this maker please let me know haha MF FAP doesn’t sound that great haha.
I have a interesting concept in idea in mind. I have made quite some paintball part over te time. what if it was all placed into 1 thing a open Marker project that is "fully" 3d printed based on some basic tippmann parts to start out with. that haves option to use T15 mags, Tipx, TMC, helix, haves a lokbot option. can use Tippmann stocks and shrouds from the t98, a5 x7's and is open to use some custom 3d designed ones as well. does that sounds cool? do keep in mind you still need to think about 2 or 3 rolles of 3d filament to make one at least if you use a lot of 3d printed parts like the shroud and buttstock. so it's not exactly a free maker... but it does open it up for anyone to play magfed. or at least make one from basic tippmann parts. and customise it with STEP files. so what do you think?
this of course will be a big project! with a lot of big parts to be printed and prototyped. so some donations for this project would be more and welcome other wise it will not happend anytime soon. but im more than confident enough that I can pull it off. if a thing like a FGC-9 or WTF-9 can be made that shoots 9mm rounds than well lets say making a paintball maker should not be that hard haha.
then some would say, why do make this thing and ask nothing for it. you should put up for sale. well I think that there is no marked for that.. it would take quite some time and material to print. and can that compete to a mass produced one in price realistically? I don't really see people pay for that.
but the idea is that anyone could make is even at places were regular magfed may look to "real" for there laws. so I do think about making one in a more nerf like design or at least less "real" than you could play with out worrying about bull crap laws preventing you playing the game of magfed.
and besides that is opens a whole new world up for customisation and personalisation
for donation and contact information download the files
Donations link to Paypal
https://www.paypal.me/dannyhoogesteger
TURN ON: Print Tiny walls! I did my best, but it was really time consuming to make it totally solid in the inside... so some walls are tiny depending on the scale you make it in. so check your preview fist in you slicer, Before printing!
I have made a 1/6 scale these can be used for like those action figures that use the 1/6 scale weapons.
wall thickness 4, infill 20% should be more than enough. but use your own judgment on it
for the promoting the FGC9 it would be nice so see some fun time laps movies of this. or some crazy colours! be creative with it. or use the 1/6 action figures.
put it out there.
these lowers will use a M5 bolt that is 25mm long with 1 M5 washer and the M6 lock washer
so the lower got a bit more material so it should be stronger. does this mean that you ned to modified the pistol grips. no. you can still use the same models I have used a small spacer piece around my M5 bolt but it's something that might not be needed at all really.
——
MKII vs MKIISD version
this lower got the same concept of using a metal rod with a OD of 4mm and 26mm long as with the FGC9 SD, and I have seen if done before by others. it’s fair to say that it would limit the potential of that part to break.
the MKIISD version will hide the metal pin and makes it look like a stock MKII
but with this design you can hide the metal part. it’s up to you if you like that look better or not.
here do I show the 14mm CCW barrels options for the FGC-6 that can be used for airsoft tracers, flash hiders, sound amplifiers or screw on suppressors.
the barrel 14mm CCW barrel tips have now been added
the parts can be found in the links bellow
-
FGC-6BL MKII links
https://www.printables.com/social/180009-untangleworks/collections/492099
https://cults3d.com/en/design-collections/UntangleART/fgc-6bl-mkii-mkiisd
FGC-6BL MKI and Hybrid
https://www.printables.com/social/180009-untangleworks/collections/492098
https://cults3d.com/en/design-collections/UntangleART/fgc-6bl-mki-hybrid
----
links to the new FGC6 FAstarter kits
MKI
https://www.printables.com/social/180009-untangleworks/collections/88906
https://cults3d.com/en/design-collections/UntangleART/fgc-6-fa-mki
MKII
https://www.printables.com/social/180009-untangleworks/collections/88896
https://cults3d.com/en/design-collections/UntangleART/fgc-6-fa-mkii
__
communication group on discord
https://discord.gg/dxR64kMHeT
short PB movies and products photo’s on
instagram @UntangleWORKS