SB5102 uses SPI flash. The ISP pin (pin 9) needs to pull high. Regular 120V power applies. One side cable to solder to the J303. The programming is simple and fast since it only has 2M of flash. ... https://www.youtube.com/watch?v=6b7fOHBssOY
The same idea as for TM1602 modem. The emmc size is 0x7060000. Just use TM1602 configuration.
3.3v, GND, CLK,CMD,DAT0 are needed to connected to u-link NT.
u-link NT
Pin 1 3.3v (Black)
Pin 2 GND (White)
Pin 4 CMD (Purple)
Pin 6 CLK (Green)
Pin 8, Pin 10 (DAT0)
...
https://www.youtube.com/watch?v=T7WK2iuLtR0
USB BDM NT only works for MC6833X CPU.
USB JTAG NT works a lot of target but obsolete.
u-Link NT replace the USB JTAG NT and support more targets.
u-Link Nand (releasing soon) only programs NAND flash.
All above hardware using the same software called USB JTAG NT (might rename in the future).
Software runs on Windows, Linux and Mac.
UJmodem software only works with u-Link NT and USB JTAG NT. It has no use for USB BDM NT.
...
https://www.youtube.com/watch?v=tBcYtIuXaA4
USB JTAG NT can drive SPI LCD display. This is a cheap lcd display from ebay. Normally it is used for micro controller. Since it uses SPI, I used USB JTAG NT, the clock speed can even go up to 12M. This is simply a demo and I will use this LCD on STM based processor.
...
https://www.youtube.com/watch?v=035J-fKamCk
Now all apps are built for 64 bits.
1. Download software and library
http://www.usbjtag.com
2. Extract library to ~/Downloads. Extract software to ~/Desktop
3. Add to ~/.profile
LD_LIBRARY_PATH=~/Downloads/QtLib
export LD_LIBRARY_PATH
4. Enable the libusb (Change to MODE="0666")
sudo vi /lib/udev/rules.d/50-udev-default.rules
5. Execute the USBJTAG NT software from terminal.
...
https://www.youtube.com/watch?v=OO30j7gPG54
In software 1.23 we have solved issues that blocking the fast programming for ECU411.
1. We can get 6MHz BDM clock.
2. We can use fast programming.
The total programing include erase is less than six seconds.
If you need to get faster programming for your ECU (like Volvo), please let me know and I will help you to get the super faster programming.
...
https://www.youtube.com/watch?v=mh3yNFcB-Hc
u-Link NAND program Meraki MR24. Use a clamp to secure the connection. Flip the DIP pins to easily align the pin 1.
Add HY27US08561A to the NAND flash definition.
Also create the MR24 target. (do not forget to add GivePower 1)
...
https://www.youtube.com/watch?v=Wwnv54BL370
Original video is flash format. Convert to MP4 for better viewing experience. The new NT software looks different than this one but the concept is the
...
https://www.youtube.com/watch?v=N5UkTEjIBd4
USBJTAG NT 0.65 officially supports Android. This is demo using Galaxy Note 10.1. 4.1.2. Programming DCT700.
...
https://www.youtube.com/watch?v=Owm9J85De80