Note: There is good stuff from Ebay as well but some arent.
In this video i open up one adaptive fast charger for Samsung Mobile phones. This one was totally fried.
To make the test fair i bough 5 of them and ALL 5 did the same thing.
Got hot after 10 minutes and then stopped working. This could potentially burn down your house if it catches on fire. Thats how hot it went. ... https://www.youtube.com/watch?v=QBUonGgQ6gU
In this video I tackle the build itself. In next we go through the details of the build.
-- More information below! --
ESP8266 heater system controlling heat to my house
3D print used: https://www.thingiverse.com/thing:1708255
Diagram:
All links are affiliate linked so I can gains something for the work.
Sensors used: https://ebay.to/2NjVqOR
Relay board used: https://ebay.to/2xp8mI8
ESP8266 used: https://ebay.to/2xgkLir
Powersupply used: https://ebay.to/2OoTmkQ
Nextion Display: https://ebay.to/2MwGPKw
Github https://github.com/daromer2/ESP-heater
-------------------------------
Do you want to support my channel? Below links cost you nothing to use:
Complete list of recommended stuff: http://diytechandrepairs.nu/complete-solar-best-buy-list/
Ebay: https://goo.gl/PwRR68
Amazon: https://goo.gl/VSU4YH
Amazon store https://www.amazon.com/shop/influencer-6fceca1d
Banggood https://goo.gl/fcCjJ5
Gearbest: https://goo.gl/tay4J6
Patreon and Paypal:
https://www.patreon.com/DIYtech
paypal@romer.se / https://www.paypal.me/diytechandrepairs
Become a Patreon?
https://patreon.com/invite/bqxpyp
Manage your youtube videos like I do? Use below
https://www.tubebuddy.com/DiyTechandrepairs
---------------------------------------
Links to my site and current solar layout:
http://diytechandrepairs.nu/current-solar-layout/
https://www.facebook.com/diytechandrepairs/
http://www.diypowerwalls.com/t-Esperyd-Solar-and-powerwall-system
Steemit if you want to read more!
https://steemit.com/@diytechandrepair
DIY powerwall forum: https://goo.gl/Hfr529
--------------------------------------------------------------
...
https://www.youtube.com/watch?v=q94qtu8vBL0
This video will quickly show you how i setup my junction box for incomming solar power.
I have 2 incomming for my main inverter. 2 strings.
Both boxes consist of 1 lightning protection unit that breaks on overvoltage. There is also 1 breaker switch that is capable of 1200V DC. This is important that you dont use non DC rated breakers here since they will not work in the long run.
My strings can reach as high as 850-900V a cold day!!
For more information please subscribe and like: I will be posting alot more videos about this system as soon as they get edited!
For more information about my actuall system please look into my overview video (The extended one)
That one will contain all details needed. (Not uploaded yet)
Music credits goes to:
https://soundcloud.com/bitburner
...
https://www.youtube.com/watch?v=pz4dSEJuKPc
My inverter stopped working one day. It just wouldn't start with the battery hooked up.
-- More information below! --
It was a sad day. Whole house was black but yeah...
I took it apart and could identify that the main DC/DC board for the battery had many IGBT broken. I could also verify that everything else did work just fine. Solar, grid and all other worked.
I contacted MPP support. After 2 days I called them and not untill then did they respond. After another 4-5 days i got back that I need to replace 3 boards to solve the issue...
Unfortunately it was a saad day since the warranty was no longer there due to over 1 year old.....
It did cost me quite some bucks so I have to spend a bit less on upcoming solar things but had to get it sorted!
Atleast its time to focus on the battery now that still arent done :D
-------------------------------
Do you want to support my channel? Below links cost you nothing to use:
Complete list of recommended stuff: http://diytechandrepairs.nu/complete-solar-best-buy-list/
Ebay: https://goo.gl/PwRR68
Amazon: https://goo.gl/VSU4YH
Amazon store https://www.amazon.com/shop/influencer-6fceca1d
Banggood https://goo.gl/fcCjJ5
Gearbest: https://goo.gl/tay4J6
Patreon and Paypal:
https://www.patreon.com/DIYtech
paypal@romer.se / https://www.paypal.me/diytechandrepairs
Become a Patreon?
https://patreon.com/invite/bqxpyp
Manage your youtube videos like I do? Use below
https://www.tubebuddy.com/DiyTechandrepairs
---------------------------------------
Links to my site and current solar layout:
http://diytechandrepairs.nu/current-solar-layout/
https://www.facebook.com/diytechandrepairs/
http://www.diypowerwalls.com/t-Esperyd-Solar-and-powerwall-system
Steemit if you want to read more!
https://steemit.com/@diytechandrepair
DIY powerwall forum: https://goo.gl/Hfr529
--------------------------------------------------------------
...
https://www.youtube.com/watch?v=krizD_W6Yw4
How do you get things done! This is how I build them.. Kind of :)
-- More information below! --
If you want to buy anything related to theis build check this link out:
http://diytechandrepairs.nu/current-solar-layout/
This video was just something i wanted to do. Though it didnt go as planned and forgot to set static settings on the camera and therefore the whitebalance and all was on auto causing color issues..
Next time it might go better!
-------------------------------
Affiliate links (Using them helps me with this channel)
Ebay: https://goo.gl/PwRR68
Amazon: https://goo.gl/VSU4YH
Banggood https://goo.gl/fcCjJ5
---------------------------------------
Links
To my site and current solar layout:
http://diytechandrepairs.nu/current-solar-layout/
https://www.facebook.com/diytechandrepairs/
http://www.diypowerwalls.com/t-Esperyd-Solar-and-powerwall-system
DIY powerwall forum: https://goo.gl/Hfr529
DIY Facebook page: https://www.facebook.com/groups/diypowerwalls/
Dont forget to visit Peters youtube channel!
https://www.youtube.com/user/nocrf50here
----------------------------------------
Want to help me out or if you appreciate what i do?
Patreon: https://www.patreon.com/DIYtech
paypal@romer.se / https://www.paypal.me/diytechandrepairs
--------------------------------------------------------------
...
https://www.youtube.com/watch?v=NcW5IkLp2YE
In this video i go through how to build a dummy load to your charger to easily get your batteries to storage charge!
Im using 5*5ohm resistors in paralell. To this i then hook up my iCharger DUo 308.
If anyone have questions feel free to comment.
Im soon posting an update to this video where i show you how to use it in 2 steps.
1. Hot to actually decharge batteries to storage load
2. How to use it for load testing other stuff.
...
https://www.youtube.com/watch?v=IuXXQDMFMgA
Straighten copper wire - Quick tips!
----------------------------------------
Do you want to contribute?
Patreon: https://www.patreon.com/DIYtech
Or more of direct style you can paypal me at paypal@romer.se / https://www.paypal.me/diytechandrepairs
By contributing i can also include a shout out in the end of a video or in text. If so let me know :)
(And I thank the ones who did contribute so far!!)
--------------------------------------------------------------
...
https://www.youtube.com/watch?v=_AVCL11nb9g
Some more info regarding my Pi and also show some of my network room. Where i have my Mainswitch, 2 mikrotiks and some patchpanels.
...
https://www.youtube.com/watch?v=yiH9MA_ZJuM
Homemade CNC machine. Built to run with Mach3 and with Nema23 motors. 60*40*20cm is the bed and travel size.
...
https://www.youtube.com/watch?v=wgvrz545tOc
Arranging 18650 cells into packs that will spread the capacity even among your tesla power wall!
Reducing balance issues in the end.
-- More information below! --
Disclaimer. This is not a substitute for a good BMS! A BMS will always be needed for proper protection and keeping the cells in balance!
When arranging the cells I always arrange the cells in 100mAh buckets. Always make sure you have enough cells before you assemble any packs so you can easily spread them evenly among all the packs.
This will ensure that you in the end get less work and you dont have to calculate your packs to get them even. You will also end up with even packs in terms of types of cells.
I do not meassure IR due to that i run low current application in terms of current per cell. The IR for me is not that rellevant and the ones with high IR are removed by the discharge test it self.
Im not saying you shouldnt use IR... Thats up to you :)
The testers that is used are generally not that precise so therefore i arrange them in 100mAh buckets. For instance the Opus can easily diff 10% between tests. For instance due to bad contact!
If you want to buy anything i use for my system check links below.
Link to my page including how i process the cells: (It also includes link to the stuff)
http://diytechandrepairs.nu/current-solar-layout/
Links to 18650 Playlist with all videos needed!
https://www.youtube.com/watch?v=uyFm1PfmdSE&list=PLOW-knRjfDQccjKxfHxGtkpEtUf_lJCnd
Opus charger (Ebay)
Opus bt3100 charger: https://goo.gl/PwRR68
18650 Internal resistance tester!: https://goo.gl/6oFYKC
Well worth its money
SUPER DEAL on 18650 CELLS!
https://goo.gl/9eXj6Q
Tesla packs super deal!
https://goo.gl/dZn7UY
-------------------------------
Affiliate links (Using them helps me with this channel)
Ebay: https://goo.gl/PwRR68
Amazon: https://goo.gl/VSU4YH
Banggood https://goo.gl/fcCjJ5
---------------------------------------
Links
To my site and current solar layout:
http://diytechandrepairs.nu/current-solar-layout/
https://www.facebook.com/diytechandrepairs/
http://www.diypowerwalls.com/t-Esperyd-Solar-and-powerwall-system
----------------------------------------
Want to help me out or if you appreciate what i do?
Patreon: https://www.patreon.com/DIYtech
paypal@romer.se / https://www.paypal.me/diytechandrepairs
By buying the stuff i link to will also yield some extra for me.
And done forget to share my work!
--------------------------------------------------------------
...
https://www.youtube.com/watch?v=jsXzaGmmvDc