In this video, I will attempt to cast a Skeleton Hand and I will make it from a fresh batch of Nordic Gold that I just made in the video. I will use petrobond sand, This is a non conventional pattern with a slight curve to it.
I have been making some lifting tongs and Pouring Shanks, If you need some, email me with what you need, and I'll see what I can do.
When I make extras, I will have them listed on my website.
Check out my Website, I may have a few goodies for sale. Everything helps support the channel.
https://thewulf56.com/
I also made a section where I added some of my friends Channel link to my Website that will bring you to their YouTube Channel. If you wanna get added just email me.
I now have a P.O. Box if you want to send a letter or Channel Sticker or something cool.
TheWulf56
P.O. Box 741
Warren, TX 77664
E-Mail: thewulf056@gmail.com
Check out my other Videos: https://www.youtube.com/thewulf56
Be sure to like and subscribe if you liked the Videos.
...
https://www.youtube.com/watch?v=dw0fAY65M8Q
In this video, I will be making some Bitcoins, not only myself, but a few friends also. This will be a Collaboration Between Myself, Metalscrapper, Ingot Joe and Casting Technology. We will ALL be making Bitcoins. There are a lot of different Versions out there, Tune in and see what designs we all made, some could be the same, some could be different, there could be large or small ones made, I really don't know for sure, Tune in to find out. All videos will air Back to back, one right after the other. Mine will Premiere at 9:00am CST, Ingot Joe @9:15amCST, Metalscrapper @9:30amCST and Casting Technology finishing it off @am9:45.
4 Channel Collaboration, Saturday June 5th 2021
Thewulf56 - 9:00am CST
https://youtu.be/cXnUonJOMmw
Ingot Joe - 9:15am CST
https://www.youtube.com/watch?v=YC5F1RYBJzk
Metalscrapper - 9:30am CST
https://www.youtube.com/watch?v=6pznHExes_0
Casting Technology- 9:45 am CST
https://www.youtube.com/watch?v=eoCZTZ5QnPM
#Copper #Petrobond #HowTo #DevilForge #Wolf #Wulf
Casting Copper - Copper - Molten Metal #DevilForge - #Nordic Gold
If you need any tools for your furnace, I have been making some lifting tongs and Pouring Shanks/Pouring tongs, If you need some, email me with what you need, and I'll see what I can do.
When I make extras, I will have them listed on my website.
Check out my Website, I may have a few goodies for sale. Everything helps support the channel.
https://thewulf56.com/
Do you want some Wulf Merch, Check out my Teespring Store.
https://teespring.com/stores/thewulf56
I now have a P.O. Box if you want to send a letter or Channel Sticker or something cool.
TheWulf56
P.O. Box 741
Warren, TX 77664
E-Mail: thewulf056@gmail.com
Check out my other Videos: https://www.youtube.com/thewulf56
Be sure to like and subscribe if you liked the Videos.
...
https://www.youtube.com/watch?v=cXnUonJOMmw
Come check out the RN Metals Auction. Thursday May 4th at 7:30 PM EST
RN Metals Channel
https://www.youtube.com/live/grh3-4g6yU4?feature=share
...
https://www.youtube.com/watch?v=bDQ04RzZpw0
In this video, I will be making some Bronze for some upcoming projects. This is a 90%Copper, 10%Tin Mix.
FINAL LINEUP FOR SATURDAY 02/19/22
The Wulf 56 11:00 AM https://youtu.be/tfaPggfBVKo
Will's Treasures 11:15 AM https://youtu.be/SahSGICPMRg
Wild West Stack 11:30 AM https://youtu.be/PcjF9w0XHAs
Mrs Coin Crew 11:45 PM https://youtu.be/AEPwwlCympc
PPP 12:00 PM https://youtu.be/F74QdLWFd0Q
Stacks and Stuff 12:15 PM https://youtu.be/zY-9YrKYEog
Big Red Bullion 12:30 PM https://youtu.be/fbkF06WKOKw
Madd Stacker 12:45 PM
If you need any tools for your furnace, I have been making some lifting tongs and Pouring Shanks/Pouring tongs, If you need some, email me with what you need, and I'll see what I can do.
When I make extras, I will have them listed on my website. Everything helps support the channel. https://thewulf56.com/ Contact Info on my About Me Page.
Be sure to like and subscribe if you liked the Videos.
PLEASE SUPPORT MY CHANNEL - I am an Amazon Associate and if you shop on Amazon, please feel free to click one of my links below - I get a little extra every time you shop using my link:
TOAUTO 1+3KG Melting Furnace,1400W 2100F/1150C 110v
https://amzn.to/3EFj9i8
TOAUTO 3KG Furnace,1400W 2000F 110V Casting Furnace
https://amzn.to/3EK28Dy
#3 4KG MegaCast, Foundry Clay Graphite Crucibles
https://amzn.to/3EFjVvy
#3-4 Kg ProCast Foundry Clay Graphite Crucible
https://amzn.to/3EK2uKo
#8 10 Kg Foundry Clay Graphite Crucibles
https://amzn.to/3zi3l3B
PMC Supplies LLC #6-8 Kg ProCast Foundry Clay Graphite Crucibles
https://amzn.to/3qKfY3T
26" ProCast Foundry Crucible Flask Tongs for Graphite Refinery Crucibles
https://amzn.to/3HvUXAn
#10-12 Kg ProCast Foundry Clay Graphite Crucible
https://amzn.to/32BwcnU
Salamander CRUIBLES A-8 Clay Graphite Crucible
https://amzn.to/3pK6iqu
A6-9 Kg Salamander Super Clay Graphite Crucible
https://amzn.to/3EPjgYm
A12 SALAMANDER CLAY GRAPHITE CRUCIBLE
https://amzn.to/3zflEqm
4 Pieces 1 KG Graphite Ingot Mold (90 x 40 x 20 mm)
https://amzn.to/3eFi67p
2 Kg Graphite Ingot Mold, 85 x 45 x 30 mm (2)
https://amzn.to/34e3ObQ
GONGYI (#7-5KG-250ML)High Purity Graphite Ingot Mold
https://amzn.to/3FLoMfW
Graphite Ingot Mold (40x40x45mm, 1000g Gold/500g Silver)
https://amzn.to/3sOfooc
100 oz Troy Ounce Loaf Cast Iron Ingot Mold
https://amzn.to/3eDQ5Nv
200oz Gold /Silver 100 oz Cast Iron Loaf Mold
https://amzn.to/3mMuHtC
Small - Skull 3D Graphite Ingot Mold
https://amzn.to/3eXNZs1
Gold Silver Graphite Ingot Mold Mold (5000g)
https://amzn.to/3HvVDWr
Custom Texas 5 oz Graphite Mold
https://amzn.to/3zv1zMZ
Large - Four Leaf Clover 3D Gr
...
https://www.youtube.com/watch?v=tfaPggfBVKo
***CLOSED***This is my Official Video for my 1,000 Subscriber Giveaway. I will be trying something new for this giveaway. ***NOTE*** "For name, you can just enter your CHANNEL NAME" To enter the Giveaway you will have to go to this website: https://gleam.io/NIFMy/1000-subscriber-giveaway-thewulf56 Complete the actions on this site to get your entries into the Giveaway. Winners will be picked from the entries on the site. Winners have 5 days, from the time the Video airs to contact me, or I will pick a new winner. Winners must confirm they are subscribed to my channel, It must be either public or you must Email me a screenshot of your channel showing my subscription. You must be 18 years of age, and will be prompted on the Giveaway site. Good luck to everyone. I will ship worldwide on this one, but I wont be responsible for lost mail for this Giveaway. There are no replacements for what was made. Thank you all for your continued support. Couldn't have got here without you.
There is also the winners for the Christmas coin Giveaway, check out the video to see how you did.
If you need any tools for your furnace, I have been making some lifting tongs and Pouring Shanks/Pouring tongs, If you need some, email me with what you need, and I'll see what I can do.
When I make extras, I will have them listed on my website.
Check out my Website, I may have a few goodies for sale. Everything helps support the channel.
https://thewulf56.com/
If you want some Wulf Merch, Check out my Teespring Store.
https://teespring.com/stores/thewulf56
I also made a section where I added some of my friends Channel link to my Website that will bring you to their YouTube Channel. If you wanna get added just email me.
I now have a P.O. Box if you want to send a letter or Channel Sticker or something cool.
TheWulf56
P.O. Box 741
Warren, TX 77664
E-Mail: thewulf056@gmail.com
Check out my other Videos: https://www.youtube.com/thewulf56
Be sure to like and subscribe if you liked the Videos.
...
https://www.youtube.com/watch?v=FG_bTlPOS-o
In this video, I will be casting a new pattern that I recently made. The howling Wolf. Sit back and relax and see how it turns out.
FINAL LINEUP FOR SATURDAY 02/26/22
The Wulf 56 11:00 AM https://youtu.be/k4E9toike80
Will's Treasures 11:15 AM https://youtu.be/OFoJWMOKCKE
Wild West Stack 11:30 AM https://youtu.be/YrJVMi8_z6M
Mrs Coin Crew 11:45 PM https://youtu.be/F7V1fjCmKro
PPP 12:00 PM https://youtu.be/HvddiLJv0Ms
Stacks and Stuff 12:15 PM https://youtu.be/G2b25L8I3-o
Big Red Bullion 12:30 PM https://youtu.be/mCPSBMVCCHA
Madd Stacker 12:45 PM https://youtu.be/lpod7_haoTE
If you need any tools for your furnace, I have been making some lifting tongs and Pouring Shanks/Pouring tongs, If you need some, email me with what you need, and I'll see what I can do.
When I make extras, I will have them listed on my website. Everything helps support the channel. https://thewulf56.com/ Contact Info on my About Me Page.
Be sure to like and subscribe if you liked the Videos.
PLEASE SUPPORT MY CHANNEL - I am an Amazon Associate and if you shop on Amazon, please feel free to click one of my links below - I get a little extra every time you shop using my link:
TOAUTO 1+3KG Melting Furnace,1400W 2100F/1150C 110v
https://amzn.to/3EFj9i8
TOAUTO 3KG Furnace,1400W 2000F 110V Casting Furnace
https://amzn.to/3EK28Dy
#3 4KG MegaCast, Foundry Clay Graphite Crucibles
https://amzn.to/3EFjVvy
#3-4 Kg ProCast Foundry Clay Graphite Crucible
https://amzn.to/3EK2uKo
#8 10 Kg Foundry Clay Graphite Crucibles
https://amzn.to/3zi3l3B
PMC Supplies LLC #6-8 Kg ProCast Foundry Clay Graphite Crucibles
https://amzn.to/3qKfY3T
26" ProCast Foundry Crucible Flask Tongs for Graphite Refinery Crucibles
https://amzn.to/3HvUXAn
#10-12 Kg ProCast Foundry Clay Graphite Crucible
https://amzn.to/32BwcnU
Salamander CRUIBLES A-8 Clay Graphite Crucible
https://amzn.to/3pK6iqu
A6-9 Kg Salamander Super Clay Graphite Crucible
https://amzn.to/3EPjgYm
A12 SALAMANDER CLAY GRAPHITE CRUCIBLE
https://amzn.to/3zflEqm
4 Pieces 1 KG Graphite Ingot Mold (90 x 40 x 20 mm)
https://amzn.to/3eFi67p
2 Kg Graphite Ingot Mold, 85 x 45 x 30 mm (2)
https://amzn.to/34e3ObQ
GONGYI (#7-5KG-250ML)High Purity Graphite Ingot Mold
https://amzn.to/3FLoMfW
Graphite Ingot Mold (40x40x45mm, 1000g Gold/500g Silver)
https://amzn.to/3sOfooc
100 oz Troy Ounce Loaf Cast Iron Ingot Mold
https://amzn.to/3eDQ5Nv
200oz Gold /Silver 100 oz Cast Iron Loaf Mold
https://amzn.to/3mMuHtC
Small - Skull 3D Graphite Ingot Mold
https://amzn.to/3eXNZs1
Gold Silver Graphite Ingot Mold Mold (5000g)
https://amzn.to/3HvVDWr
Custom Texas 5 oz Graphite Mold
...
https://www.youtube.com/watch?v=k4E9toike80
In this video I will be making Custom Copper Channel Bars and Han Solo in Carbonite. I also took a shot at making a Pickaxe Cross, was challenged by a fellow Metal caster, Tried a new style when I made it, it was almost perfect, just shy on a little metal on one of the Pickaxe blades, but, not to bad overall.
#Copper #Petrobond #HowTo #DevilForge #HanSolo
If you need any tools for your furnace, I have been making some lifting tongs and Pouring Shanks/Pouring tongs, If you need some, email me with what you need, and I'll see what I can do.
When I make extras, I will have them listed on my website.
Check out my Website, I may have a few goodies for sale. Everything helps support the channel.
https://thewulf56.com/
Do you want some Wulf Merch, Check out my Teespring Store.
https://teespring.com/stores/thewulf56
I now have a P.O. Box if you want to send a letter or Channel Sticker or something cool.
TheWulf56
P.O. Box 741
Warren, TX 77664
E-Mail: thewulf056@gmail.com
Check out my other Videos: https://www.youtube.com/thewulf56
Be sure to like and subscribe if you liked the Videos.
...
https://www.youtube.com/watch?v=REi3Rsor0dU
In this video, I 3D printed the Karambit Dagger from the video game CSGO. I got the file from Thingiverse. Had a couple Blemishes, but it turned out pretty good. Hope you enjoy the video, Please remember to Like and Subscribe to see new videos. Always remember safety, when dealing with Molten Metal.
Check out my Esty shop to see some Items I have made and up for sale. https://www.etsy.com/shop/Thewulf56
Check out my other Videos: https://www.youtube.com/channel/UCJd3i9jx9FVruNO6nPWJv9w/videos?view_as=subscriber
Be sure to like and subscribe if you liked the Videos.
Also, take a look at a couple of my fellow casters.
Learned a lot from these guys:
ArtbyAdrock
https://www.youtube.com/channel/UCbgMwToNGjwwgn9BRnzAmEQ/featured
bigstackD Casting
https://www.youtube.com/user/bigstackD
Check out their Channels, they have some really great Videos
...
https://www.youtube.com/watch?v=CwKRK7Q01Ew
This is Part 2 of my making Goonies Props. In this Video, I will be making some Items from the movie "The Goonies" I will be making the Silver Spanish Doubloon, The Silver Bone Key.
Spanish Doubloon
https://www.instructables.com/workshop/howto/goonies/
Copper Bone Key
https://www.thingiverse.com/thing:2016229
I have been making some lifting tongs and Pouring Shanks, If you need some, email me with what you need, and I'll see what I can do.
When I make extras, I will have them listed on my website.
Check out my Website, I may have a few goodies for sale. Everything helps support the channel.
https://thewulf56.com/
I also made a section where I added some of my friends Channel link to my Website that will bring you to their YouTube Channel. If you wanna get added just email me.
I now have a P.O. Box if you want to send a letter or Channel Sticker or something cool.
TheWulf56
P.O. Box 741
Warren, TX 77664
E-Mail: thewulf056@gmail.com
Check out my other Videos: https://www.youtube.com/thewulf56
Be sure to like and subscribe if you liked the Videos.
...
https://www.youtube.com/watch?v=Aew5s3GwbsU