Heat Driven Thermoacoustic Heat Pump - The most underrrated technology in 2021
#thermoacoustic, #heatpump, #diy Hi guys, today I'll show you a Heat Driven Thermoacoustic Heat Pump - The most underrated technology in 2021 This type of thermoacoustic heat pump has No solid moving parts No needs maintenance practically
If you want a bit more information about standing wave thermoacoustics then just follow this link to see NightHawkInLight video about that: https://youtu.be/kkBBkQ8jFRY
Don't forget to subscribe and follow my channel: https://www.youtube.com/user/bladeattila Stay tuned! Check my heat engine blog: http:manson-ericsson-hae.blogspot.hu
Hello guys!
Few years ago, my friend Simi112 made a simple designed engine as a manson/ringbom types modified. The power piston direct connected with the displacer (they move together), and the other piston only change the pressure in the engine. Simi112 used some water in a curved tube, and the engine has a pretty good torque and power!
Original video: https://www.youtube.com/watch?v=f_8GNURkVGY
MAR 2014 Dreisotech made a simple engine with air piston in same construction!
Original video: https://www.youtube.com/watch?v=8XPERVeoXYY
Those engines had a big dead volume in.
Simi112 started a long series of experiments with this construction .
My version of this modified Metronome engine on my video.
I used inside levers. Connected direct with the power piston also the displacer, but the movement ratio is 1:3
No dead volume if I use air piston in connected tube.
Small dead volume if I use some water in it, or other liquids.
Don't forget to share and comment this video!
See you soon!
BLADE
...
https://www.youtube.com/watch?v=Af5HHv6HoMI
I thought about the differencies of this bow tie method, but I didn't found any problem on it. So if this mechanism is move symmetrical then I don't understand the results of the earlier videos. But I deleted that yet, because that was a mistake of my video cutter program.
So weird!
Maybe the frame rate was too low, and the pictures are misaligned relative to each other. I don't know!
Anyway, this mechanism has a symmetrical movement in both directions.
...
https://www.youtube.com/watch?v=J7__IicyQZQ
Jet Boat V2 - Low noise High thrust update
#thermoacoustics, #hotairengine, #jetboat
By joining my channel's background community, you can watch new interesting contents and get rewards:
https://www.youtube.com/channel/UCurA84YG_FZS0UfZipDkSPw/join
If you don't want to be a member but you would like to support my efforts don't hesitate to use the Super THANKS button under my videos! ?
If you want more informations and exclusive contents BUT NOT on youtube, be my patron on my Patreon site?:
https://www.patreon.com/bladeattila
OTHER VIDEOS YOU MIGHT LIKE:
○ Transparent NASA free piston Stirling: https://youtu.be/dOSGpzGhrJQ
○ Tutorial for easy to build free piston Stirling engine: https://youtu.be/_CsZv15XMcg
○ How to make DIY epoxy piston for Stirling engine: https://youtu.be/rxna7W8yhVE
○ DIY tutorial for a simple high speed thermoacoustic hot air engine: https://youtu.be/y50sve8p6I0
○ Simple Stirling engine car : https://youtu.be/s656Z5t_ugM
○ DIY an "Oximoron" hot air engine: https://youtu.be/ApW211YhkLA
○ 50Hz!!! High speed thermal lag "cupid arrow" engine: https://youtu.be/zV8edaVOUlg
○ The updated cheap and easy NASA Stirling from soft drink can: https://youtu.be/iAu4as9fRNo
○ Make your own solar heat engine DIY tutorial: https://youtu.be/Qd4c0-NF-tw
○ DIY test tube Stirling engine tutorial: https://youtu.be/c2vfz5zuHe4
My new Instagram page where I will share smaller projects, funny things, toys etc...etc... Follow me here:
https://www.instagram.com/attilablade/
Don't forget to subscribe and follow my channel: https://www.youtube.com/user/bladeattila
Stay tuned!
Check my heat engine blog: http:manson-ericsson-hae.blogspot.hu
Support my efforts with a simple video sharing please or with few $ via paypal:
https://www.paypal.com/cgi-bin/webscr...
THANKS!
See You Soon!
BLADE
...
https://www.youtube.com/watch?v=B6Uq3zc4el0
#stirlingengine, #shorts, #thermodinamics
I want to show you in slow motion...
Why not Stirling Engine? - Metronome Hot Air Engine has a Different Thermodynamic Cycle!
Shaker ball spring for this experiment: https://amzn.to/3cOJIWz
The power piston moves in phase with a regenerative displacer!
The fluidyne piston is the controller of the cycle. This piston change the pressure inside the engine to change the direction of the power piston movement.
Isothermal Compression (short term) 1-2
Isobaric Heat Addiction (long term) 2-3
Isothermal Expansion (short term) 3-4
Isobar Heat Removal (long term) 4-1
My opinion is, this is an Ericsson cycle with few little changes because there was a short term Heat Addiction also short term Heat Removal, here we have long term of these steps.
OTHER VIDEOS YOU MIGHT LIKE:
○ Transparent NASA free piston Stirling: https://youtu.be/dOSGpzGhrJQ
○ Tutorial for easy to build free piston Stirling engine: https://youtu.be/_CsZv15XMcg
○ How to make DIY epoxy piston for Stirling engine: https://youtu.be/rxna7W8yhVE
○ DIY tutorial for a simple high speed thermoacoustic hot air engine: https://youtu.be/y50sve8p6I0
○ Simple Stirling engine car : https://youtu.be/s656Z5t_ugM
○ DIY an "Oximoron" hot air engine: https://youtu.be/ApW211YhkLA
○ 50Hz!!! High speed thermal lag "cupid arrow" engine: https://youtu.be/zV8edaVOUlg
○ The updated cheap and easy NASA Stirling from soft drink can: https://youtu.be/iAu4as9fRNo
○ Make your own solar heat engine DIY tutorial: https://youtu.be/Qd4c0-NF-tw
○ DIY test tube Stirling engine tutorial: https://youtu.be/c2vfz5zuHe4
My new Instagram page where I will share smaller projects, funny things, toys etc...etc... Follow me here:
https://www.instagram.com/attilablade/
Don't forget to subscribe and follow my channel: https://www.youtube.com/user/bladeattila
Stay tuned!
Check my heat engine blog: http:manson-ericsson-hae.blogspot.hu
Support my efforts with a simple video sharing please or with few $ via paypal:
https://www.paypal.com/cgi-bin/webscr...
THANKS!
See You Soon!
BLADE
...
https://www.youtube.com/watch?v=yuJ5jwEJFnc
#goldpanning, #sluicebox, #fluidbedgoldtrap, #shorts
Today I'll show you my short simulation video What happens with gold in a fluid bed? - short flow simulation video
This is a basic simulation of a gold trap with fluidisation.
OTHER VIDEOS YOU MIGHT LIKE:
○ Transparent NASA free piston Stirling: https://youtu.be/dOSGpzGhrJQ
○ Tutorial for easy to build free piston Stirling engine: https://youtu.be/_CsZv15XMcg
○ How to make DIY epoxy piston for Stirling engine: https://youtu.be/rxna7W8yhVE
○ DIY tutorial for a simple high speed thermoacoustic hot air engine: https://youtu.be/y50sve8p6I0
○ Simple Stirling engine car : https://youtu.be/s656Z5t_ugM
○ DIY an "Oximoron" hot air engine: https://youtu.be/ApW211YhkLA
○ 50Hz!!! High speed thermal lag "cupid arrow" engine: https://youtu.be/zV8edaVOUlg
○ The updated cheap and easy NASA Stirling from soft drink can: https://youtu.be/iAu4as9fRNo
○ Make your own solar heat engine DIY tutorial: https://youtu.be/Qd4c0-NF-tw
○ DIY test tube Stirling engine tutorial: https://youtu.be/c2vfz5zuHe4
My new Instagram page where I will share smaller projects, funny things, toys etc...etc... Follow me here:
https://www.instagram.com/attilablade/
Don't forget to subscribe and follow my channel: https://www.youtube.com/user/bladeattila
Stay tuned!
Check my heat engine blog: http:manson-ericsson-hae.blogspot.hu
Support my efforts with a simple video sharing please or with few $ via paypal:
https://www.paypal.com/cgi-bin/webscr...
THANKS!
See You Soon!
BLADE
...
https://www.youtube.com/watch?v=0v-ncxgbqT8
#airhockey, #tribology, #airtoy
Air hockey without blowing air? Is it possible?!
I want to show you a really interesting physical experiment from tribology.
Everybody knows or hear about the air hockey where we have a table with hundreds of tiny holes and a big fan under the table blows the air trough the table and we have a puck. Those puck could flying on the table freely when we push that.
OK!
So, is it possible to make a "flying puck" with NO air table? Could it move freely as possible without any air blowing under?
YES!
Tribology is fantastic!
I made a little experiment with CD. Mini and normal too.
I cutted off the tiny little circle shaped gate from the CD's surface around the center hole. (It will be flat as possible)
Than I granted a slight air-slope into the CD's edge with few mm width the angle was small around 5-10 degrees
After I made radial scratches on the surface with fine 180 sandpaper.
Last I closed the center hole with sticky tape.
And the pluck is ready to play with it!
OTHER VIDEOS YOU MIGHT LIKE:
○ Transparent NASA free piston Stirling: https://youtu.be/dOSGpzGhrJQ
○ Tutorial for easy to build free piston Stirling engine: https://youtu.be/_CsZv15XMcg
○ How to make DIY epoxy piston for Stirling engine: https://youtu.be/rxna7W8yhVE
○ DIY tutorial for a simple high speed thermoacoustic hot air engine: https://youtu.be/y50sve8p6I0
○ Simple Stirling engine car : https://youtu.be/s656Z5t_ugM
○ DIY an "Oximoron" hot air engine: https://youtu.be/ApW211YhkLA
○ 50Hz!!! High speed thermal lag "cupid arrow" engine: https://youtu.be/zV8edaVOUlg
○ The updated cheap and easy NASA Stirling from soft drink can: https://youtu.be/iAu4as9fRNo
○ Make your own solar heat engine DIY tutorial: https://youtu.be/Qd4c0-NF-tw
○ DIY test tube Stirling engine tutorial: https://youtu.be/c2vfz5zuHe4
My new Instagram page where I will share smaller projects, funny things, toys etc...etc... Follow me here:
https://www.instagram.com/attilablade/
Don't forget to subscribe and follow my channel: https://www.youtube.com/user/bladeattila
Stay tuned!
Check my heat engine blog: http:manson-ericsson-hae.blogspot.hu
Support my efforts with a simple video sharing please or with few $ via paypal:
https://www.paypal.com/donate/?cmd=_s-xclick&hosted_button_id=2PWLLMC9Q4FFJ
THANKS!
See You Soon!
BLADE
...
https://www.youtube.com/watch?v=3lZw7dNCKFM
Hello guys!
Some people thought about my wing pan video just a spam when my friend posted on it some gold prospector forum. After I've got lot of questions about my pan also the gold trap-surface material.
Now I try to show you my "secret" rubber mat especially for micron gold.
I used it for sampling and finish clean-up on the river's bank.
The material is a simple close-ribbed, 3mm thick rubber mat.
I used the back side of this material where I found millions of lense shaped little hole.
I hope this is a good answer for the skeptics!
Please share and vote this video!
Subscribe my channel!
See you soon!
Blade
...
https://www.youtube.com/watch?v=1zKOXS9OkOE