Test System Spec:
AMD Ryzen 9 5900X
Asus Crosshair VIII Hero Bios 2403
Patriot Viper Steel 4400C19
EVGA Geforce GT710
Integral 120GB SSD
Super Flower Leadex 1300W
...
https://www.youtube.com/watch?v=J0t-m8HVAdk
Taking my MSI GTX680 Power Edition for a spin in 3D Mark night raid. Turned out to be faster than my Lightning card due to the samsung memory overclocking much higher.
I also ran my GTX580 DCU II later in the week with a GPU block to compare the performance. It did pretty well and was the fastest out of all my GTX580's.
For the CPU I had 2 different i7 4960X that i got from Ebay. One was no so good and could only manage 4.85ghz @ 1.5v and the second one was a bit better doing 4.95ghz.
Unfortunately neither CPU could manage 5ghz.
...
https://www.youtube.com/watch?v=YsGsewSVwV4
Tekno time!
Tekno SCT410.3
LRP Dynamic 10L 4700KV
14T pinion
Tekin RX8 ESC
JX Ecoboost coreless 27KG servo
Flysky GT5
Turnigy Nanatech 5.6AH 2S2P
Arrma Senton 6S body
Proline Super Swamper SC tyres
Top speed reach was 41MPH on 2S, needs gearing up a little bit as the motor and ESC were stone cold.
Time Stamp:
0:00 First pack
4:18 speed runs
5:57 Pack two
...
https://www.youtube.com/watch?v=zcRqaq7t214
New Motor has gone in, 4092 1650KV. still using same 16/48 gearing as before. Max motor temp during these runs was 90c without heatsink. This motor will get a fan, but not a heatsink as it has fins on the motor.
...
https://www.youtube.com/watch?v=tietdLoSPwE
I have almost finished combining my parts truck with my truck, to make the ultimate SMT10, I still need a Y splitter for the rear steering so i can run both servos from one channel.
I also need to modify the sway bar to get those to work with the new shock setup.
I may also consider fitting an external BEC to handle 2 servos.
...
https://www.youtube.com/watch?v=e-diCFaSsyU