UNW BO16 tipx paintball mag mod on the OB10 3d printable mag
here do I talk about the new mod I made to the OB10 mag the OB16 mag. this is spring is only to be used for round ball. and is for sure is still not a 20 rounder but it's getting there haha...
Here is a 3D printable MCS Box Drive Dmag Tower. I found the price to expensive for a piece of plastic so I made my own.
I have not field tested jet. but it seems to feed well. and it looks in place well on a MCS Bolt and Hurricane. note that it's a bit of a tight fit
Link to the MCS Box Drive DMAG/HELIX Magazine Tower
https://www.thingiverse.com/thing:3931853
TURN ON: Print Tiny walls! I did my best, but it was really time consuming to make it totally solid in the inside... so some walls are tiny depending on the scale you make it in. so check your preview fist in you slicer, Before printing!
I have made a 1/6 scale these can be used for like those action figures that use the 1/6 scale weapons.
wall thickness 4, infill 20% should be more than enough. but use your own judgment on it
for the promoting the FGC9 it would be nice so see some fun time laps movies of this. or some crazy colours! be creative with it. or use the 1/6 action figures.
put it out there.
here will I be showing the 2 lens adapters that I made.
and they can be found thingiverse. or contact me if you like me to printed for you.
lomo Belair lens to Nikon F mount adapter
https://www.thingiverse.com/thing:4256160
lomo Belair lens to Fuji X mount adapter
https://www.thingiverse.com/thing:4252462
in case you want to go straight to the step by step function test go to 04:55
since this is home made it's good to do some sort of a quality check and fine tune the "magwell" to the collection of mags you have. and in case you have issues to go step by step and repeat all mechanical parts a view times to see if there is a works every time 60% of the time thing going on... what can be confusing. this was specially for me as a designer there were a lot of tolerances and variables. but it still doesn’t hurt to do a fast check after building your mags. so you at least know when you have marker problems it's less likely your mags or at the very least have a better idea where the issues can be...
it's a long video but I hope is saves you some ruwend games like I have to go trough wille prototyping this platform...
all the game footage you saw were from Euro SuperGame
https://eurosupergame.de/
this is not a product announcement video! and I will not be talking about ESG it self . this video is about my findings on the UNW P90 project it self after playing at a big event with it. so I will give some user tips. and what to expect form this platform and some do and don’ts.
it possibly also clear things up for those who were wondering why it preformed the way it did at the ESG movies…
this is the BELT version of the TMC MAG pouch. there is a support bar for this one. in case you need more support to balance out the pouch on your belt by giving it more support.
here a link to the BELT edition
https://www.thingiverse.com/thing:4554618
this is the MOLLE version of the TMC MAG pouch. there are different sizes Molle strips. this done in case you need a longer one to balance out the pouch on your molle by giving it more support.
here a link to the MOLLE edition
https://www.thingiverse.com/thing:4549705
also you might find it a slightly tight fit at first. but you still can remove mags with one hand just use the halm of your hand to press down on the other mags in the pouch so you don’t pull the pouch up.
this my latest shroud design and maybe even my last for the FGC lineup. but I have thought this before so who knows.
the 2 piece design makes it possible to make it less bulky then the older designs.
and the M-lok gives you a lot of options for mounting things
for the barrel? you can use the ECM v3 set that can be found here https://odysee.com/@c0ld_d8rk_h8nd:8/ECM-Barrels-v3.5:e
materials needed:
for the front of the shroud
1x M3 bolt 20mm long or up to 26mm
for on the top rail
4x M3 bolt 20mm long
I get so tiered of getting all kind of requests for odd and 1 off magfed adapters and some are more practical and logic. and some are so badly thought out and just stupid. that I feel why do you even bother me with it? stop wasting my time. others seem to think doing me e favour or something by giving me an idea for a magfed adapter. guys... I have made more than enough magfed adapters. just be happy what you got, if you don't like it make your own. I don't feel like making them any more.
———————————————————————————————
now is there a official site to buy UNW products thanks to a collaboration with AK paintball shop
https://www.akpaintballshop.nl/mag-fe...
communication group on discord
https://discord.gg/yVqrB7N
short PB movies and products photo’s on
instagram @UntangleWORKS
digital download files for 3d Printing
Link to thingiverse:
https://www.thingiverse.com/untangle/...
for donations a link to Paypal
https://www.paypal.me/dannyhoogesteger
this jig is made so it can help you get the same magnet placement. as that of the FGC9 SD version. what will lock in your charging handle forward. and improves the feel of using the charging handle over the original MKII version
it’s true that this jig is made for just a 4mm drill bit. this was done because it would other wise get to fragile. but you can just step the size of the drill up after you made a mark with the 4mm drill bit.
why would you want to do this mod? so the charging handle stays in better place by the use of the cylinder shaped magnet that haves a OD of 5mm and is 10mm long