Yes BOOORING SEAT MOUNTS... But they had to be done. In this video i finally decides on the 4th way of mounting the seats and im finally happy with it!
I actually did 2 types but decided with the later one and it will work out great. I will have to crawl under the car to remove the seats and have wholes through the floor but thats fine. There is plenty of good plastic thingys to put in the whole...
Unfortunately not all things arrived and i had to get this video out. Im waiting for things for stearing and for the air intake... Lets see when they arrive. Untill then i need to go over all joints and bracket for rear end once more to make sure it works out!
In this video I tackle the build itself. In next we go through the details of the build.
-- More information below! --
ESP8266 heater system controlling heat to my house
3D print used: https://www.thingiverse.com/thing:1708255
Diagram:
All links are affiliate linked so I can gains something for the work.
Sensors used: https://ebay.to/2NjVqOR
Relay board used: https://ebay.to/2xp8mI8
ESP8266 used: https://ebay.to/2xgkLir
Powersupply used: https://ebay.to/2OoTmkQ
Nextion Display: https://ebay.to/2MwGPKw
Github https://github.com/daromer2/ESP-heater
-------------------------------
Do you want to support my channel? Below links cost you nothing to use:
Complete list of recommended stuff: http://diytechandrepairs.nu/complete-solar-best-buy-list/
Ebay: https://goo.gl/PwRR68
Amazon: https://goo.gl/VSU4YH
Amazon store https://www.amazon.com/shop/influencer-6fceca1d
Banggood https://goo.gl/fcCjJ5
Gearbest: https://goo.gl/tay4J6
Patreon and Paypal:
https://www.patreon.com/DIYtech
paypal@romer.se / https://www.paypal.me/diytechandrepairs
Become a Patreon?
https://patreon.com/invite/bqxpyp
Manage your youtube videos like I do? Use below
https://www.tubebuddy.com/DiyTechandrepairs
---------------------------------------
Links to my site and current solar layout:
http://diytechandrepairs.nu/current-solar-layout/
https://www.facebook.com/diytechandrepairs/
http://www.diypowerwalls.com/t-Esperyd-Solar-and-powerwall-system
Steemit if you want to read more!
https://steemit.com/@diytechandrepair
DIY powerwall forum: https://goo.gl/Hfr529
--------------------------------------------------------------
...
https://www.youtube.com/watch?v=q94qtu8vBL0
We take a look at how it looks when an ATS switches and how the MPI hybrid from MPP solar does its switching
-- More information below! --
3 questions need answer.
1. How long time does it take for an ATS to switch
2. How does it look when MPI hybrid from MPP solar switch?
3. Does the MPI hybrid sync with grid for proper switching?
Answers:
1. Roughly 10ms
2. It looks good!
3. Yes it does and rather fast too!
The MPI hybrid version will be back in store September 25th 2017 regarding to MPP solar. I will add up links when that is true.
ATS or automatic transfer switch is perfect for your solar system. It makes it possible to switch between different sources.
Links (Ebay)
Contactors
https://goo.gl/9xwtwc (EU version 230V)
https://goo.gl/svXcwf (US version 120V)
1-0-2 Switch
https://goo.gl/gPMvVT
Din/Norm changeover switch
https://goo.gl/EFCzhi
Controller for above contactor:
https://goo.gl/Tzpr4Z
My website: http://diytechandrepairs.nu/
Powerwall forum: https://goo.gl/gBFLJE
BMS i use from Batrium: https://www.batrium.com/
----------------------------------------
Want to help me out or if you appreciate what i do?
Patreon: https://www.patreon.com/DIYtech
paypal@romer.se / https://www.paypal.me/diytechandrepairs
By buying the stuff i link to will also yield some extra for me.
--------------------------------------------------------------
...
https://www.youtube.com/watch?v=fZhznwksiLA
In this episode i tackle and mount the incomming grid cable to the inverter with a breaker.
I also mount the outgoing load breaker box and the cables for the battery box.
In next video i try to tackle the connection for the battery and the grid tied connection.
...
https://www.youtube.com/watch?v=hwGm4lw6ZKA
Building balance lead connector to be able to meassure voltage of my Batrium converted Valence 12V packs.
Stuff used in this video: (Affiliated ebay links below that takes you to ebay)
Battery capacity checker: https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575290868&campid=5338074051&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FLipo-Battery-Cellmeter-Balance-Discharge-Capacity-Internal-Resistance-Checker-%2F262019848297%3Fhash%3Ditem3d01999869%3Ag%3AtnIAAOSw3ydV3J-c%26rmvSB%3Dtrue
JST Connector for 4s cells: https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575290868&campid=5338074051&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2F10pcs-New-4S1P-Balance-Wire-Charger-Silicon-Cable-JST-XH-Connector-Adapter-Plug-%2F282437381176%3Fhash%3Ditem41c2946c38%3Ag%3AdlsAAOSwtZJY9gAb%26rmvSB%3Dtrue
AMP contacts: https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575290868&campid=5338074051&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2F131583838983%3F_trksid%3Dp2060353.m2749.l2649%26var%3D430954259343%26ssPageName%3DSTRK%253AMEBIDX%253AIT%26rmvSB%3Dtrue
----------------------------------------
Do you want to contribute? Lets us make this channel the top channel on Youtube!
Patreon: https://www.patreon.com/DIYtech
Or more of direct style you can paypal me at paypal@romer.se / https://www.paypal.me/diytechandrepairs
By contributing i can also include a shout out in the end of a video or in text. If so let me know :)
(And I thank the ones who did contribute so far!!)
--------------------------------------------------------------
...
https://www.youtube.com/watch?v=yQrHK9i8Zo0
Overview of several different types of meters that I use to make sure i know where my electricity heads of. The way everyone should start with if going solar or just want to save some bucks!
-- More information below! --
Measure is knowing! So if you dont have the tools in question check out the links below for Ebay. If you rather want Amazon or Banggood use those links below under and get what you want!
See you in next video!
Son off mixed search on Ebay:
https://goo.gl/PHjssZ
Son off the one used in the video and that I use: https://goo.gl/p6xuaH
SDM630 3phase electricity meter
https://goo.gl/Dxi9Bt
SDM120 1phase electricity meter
https://goo.gl/4F6Fj7
Plugin electricity meters. (If you dont own 1 get 2 as start!)
https://goo.gl/D9seGM
Zwave plugin meter
https://goo.gl/K1Ur3y
Mixed meters that you can build in. I own several of theses
https://goo.gl/gjYLju
Shunt based DC meter (Yes i have several of those too :) )
https://goo.gl/9vTs3h
Clamp meter (Perfect for checking in breaker boxes and other)
https://goo.gl/9dzQYi
-------------------------------
Affiliate links (Using them helps me with this channel)
Ebay: https://goo.gl/PwRR68
Amazon: https://goo.gl/VSU4YH
Banggood https://goo.gl/fcCjJ5
---------------------------------------
Links
To my site and current solar layout:
http://diytechandrepairs.nu/current-solar-layout/
https://www.facebook.com/diytechandrepairs/
http://www.diypowerwalls.com/t-Esperyd-Solar-and-powerwall-system
DIY powerwall forum: https://goo.gl/Hfr529
DIY Facebook page: https://www.facebook.com/groups/diypowerwalls/
Dont forget to visit Peters youtube channel!
https://www.youtube.com/user/nocrf50here
----------------------------------------
Want to help me out or if you appreciate what i do?
Patreon: https://www.patreon.com/DIYtech
paypal@romer.se / https://www.paypal.me/diytechandrepairs
--------------------------------------------------------------
...
https://www.youtube.com/watch?v=te7lbY2f89k
Batrium is awesome. In this video we take a look at their auto level function. How do you set it up for balancing your packs.
-- More information below! --
Link to FAQ: https://www.batrium.com/pages/how-to-setup-autolevel-bypass-configuration-watchmon
Going through in this video on how you can use Batrium to make sure your packs stay in balance. We set up the auto-level function and goes through its parameters.
When using Lithium batteries this is a "must" to have a way of monitoring and balancing. Especially with 2nd hand 18650 cells as an example.
Same procedure wether you use longmons or any of the other available. The Batrium BMS rocks!
Note that auto-level/balancing in mid SOC on LiFePo4 battery or cells is tricky and therefore not recommended with shown values in my video!
If you going to implement this on those types you need to be at 90% SOC or higher. This due to the very flat charge and discharge curve to voltage.
https://www.batrium.com
If you buy a BMS from Batrium then say hello to Jaron from me :)
-------------------------------
Affiliate links (Using them helps me with this channel)
Ebay: https://goo.gl/PwRR68
Amazon: https://goo.gl/VSU4YH
Banggood https://goo.gl/fcCjJ5
---------------------------------------
Links
To my site and current solar layout:
http://diytechandrepairs.nu/current-solar-layout/
https://www.facebook.com/diytechandrepairs/
http://www.diypowerwalls.com/t-Esperyd-Solar-and-powerwall-system
DIY powerwall forum: https://goo.gl/Hfr529
DIY Facebook page: https://www.facebook.com/groups/diypowerwalls/
Dont forget to visit Peters youtube channel!
https://www.youtube.com/user/nocrf50here
----------------------------------------
Want to help me out or if you appreciate what i do?
Patreon: https://www.patreon.com/DIYtech
paypal@romer.se / https://www.paypal.me/diytechandrepairs
--------------------------------------------------------------
...
https://www.youtube.com/watch?v=qNNffhusbXQ
So happy that i finally got the new version in the mail. Lets take a quick look! Find links in description
-- More information below! --
First of all Subscribe if you havent :)
Link to the Author Stuarts channel. Big shout out to him!
https://www.youtube.com/channel/UCvEcFmJsOVobLYqUSZOQfsg
JLCPCB Link. If you going to order you can use this link
https://jlcpcb.com/PDA
ESP8266 Wemos D1 mini for the old master board
https://ebay.us/rXhHQJ
https://s.click.aliexpress.com/e/_AA4OG2
https://amzn.to/3f5fPDB
ESP32 for the new board (Make sure you get the 38pin version)
https://ebay.us/78bQ4k
https://amzn.to/3sfGiSH
Screen
https://ebay.us/nuryWi
https://amzn.to/2OQVlUN
Relays:
https://ebay.us/gFPoxz
3.81mm terminal block: (4p version)
https://ebay.us/uWQoGJ
5.0mm terminal block (3p version)
https://ebay.us/XxdMLR
Other good things
Relay boards: https://ebay.us/Kw7ihd
Attiny841 for the monitor boards: https://ebay.us/TbTuG5
Connectors for the boards: https://ebay.us/J0a4ke
Wiring for balance leads and connecting it all up: https://ebay.us/6o29Gb
Programmer: https://ebay.us/T3m2Ej
Pin header male: .https://ebay.us/B9MRR4
Pin header female: https://ebay.us/HCb2Pr
Aliexpress
Attiny841 https://s.click.aliexpress.com/e/_AU9wkK
Pin headers https://s.click.aliexpress.com/e/_AKfa8E
Connectors for the boards https://s.click.aliexpress.com/e/_AgO5OK
Programmer https://s.click.aliexpress.com/e/_9ujIUw
-------------------------------
Do you want to support my channel? Below links cost you nothing to use:
Complete list of recommended stuff: http://diytechandrepairs.nu/complete-solar-best-buy-list/
Ebay: https://goo.gl/PwRR68
Amazon: https://goo.gl/VSU4YH
Amazon store https://www.amazon.com/shop/influencer-6fceca1d
Banggood https://goo.gl/fcCjJ5
Gearbest: https://goo.gl/tay4J6
Patreon and Paypal:
https://www.patreon.com/DIYtech
paypal@romer.se / https://www.paypal.me/diytechandrepairs
Become a Patreon?
https://patreon.com/invite/bqxpyp
Manage your youtube videos like I do? Use below
https://www.tubebuddy.com/DiyTechandrepairs
---------------------------------------
Links to my site and current solar layout:
http://diytechandrepairs.nu/current-solar-layout/
https://www.facebook.com/diytechandrepairs/
http://www.diypowerwalls.com/t-Esperyd-Solar-and-powerwall-system
Steemit if you want to read more!
https://steemit.com/@diytechandrepair
DIY powerwall forum: https://goo.gl/Hfr529
--------------------------------------------------------------
...
https://www.youtube.com/watch?v=gEXGgrDNMJQ
Quick test of a 30w solar panel. If you want to start with solar and want something simple this could suit you.
-- More information below! --
I think its a decent panel. But its worth mentioning that if you compare buck/watt a larger 250-300w panel tend to yield better buck per money.
The panel performed very well for the tests I did. It was some where around 5-10% under my panels on my roof but they are also running with an MPPT charger and in this case i was running at 12.4V instead of optimal 18V as mentioned on the backside.
I will follow this up with a build video when I get the MPPT charge-controller!
Where you can buy it:
MPPT Solar Panel Controller 5A DC-DC Step-down CC/CV Charging Module Display LED -- https://goo.gl/A4e4Y3
30W 12V Semi Flexible Solar Panel Device Battery Charger -- https://goo.gl/iaEB74
Banggood 11th Anniversary Promotion -- https://goo.gl/7GcRGn
---------------------------------------
Links
To my site and current solar layout:
http://diytechandrepairs.nu/current-solar-layout/
https://www.facebook.com/diytechandrepairs/
http://www.diypowerwalls.com/t-Esperyd-Solar-and-powerwall-system
----------------------------------------
Want to help me out or if you appreciate what i do?
Patreon: https://www.patreon.com/DIYtech
paypal@romer.se / https://www.paypal.me/diytechandrepairs
By buying the stuff i link to will also yield some extra for me.
And done forget to share my work!
--------------------------------------------------------------
...
https://www.youtube.com/watch?v=bpc_o4rEpTA