I recently showed you this really fancy-looking, two-color filament that comes out of the nozzle with the same pattern as it was fed and creates some mesmerizing effects on your parts. However, the question so many of you had was, what happens if you feed this material through one of the high flow nozzles that split the filament up. Will they mix the material and remove the effect? This is the question I’ll answer today by printing parts with Bondtechs CHT nozzle, my simple mesh nozzle, and finally, this overkill Hedgehog Volcano nozzle where I solder six pieces of wire in which we’ll, of course, also test for its flow capability! Let’s find out more!
I show you how I set up my DAS FILAMENT PETG filament and tested its printing performance at different hotend temperatures on my Original Prusa i3 MK2. I analyze with my DIY tensile testing machine, how the material strength changes depending on the printing temperature.
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
?Check out my PODCAST with Tom Sanladerer
https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
⚙ My gear (Affiliate Links):
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
10-25mm f1.4 - Awesome Lense: https://geni.us/ZTBH
30mm f2.8 macro - Great Macro Lense: https://geni.us/vEwqD
12-35mm f2.6 - Great allround lense: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel lense: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photoraphy: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
Download 3Dmakernoobs temperature test tower: https://www.thingiverse.com/thing:2092820
Subscribe to the channel: https://www.youtube.com/c/cnckitchen
Follow me on Twitter: https://twitter.com/cnc_kitchen
? Even watching the ads before my videos helps me a lot!
...
https://www.youtube.com/watch?v=qif070PErNU
Start your free trial at http://squarespace.com/cnckitchen and use code CNCKITCHEN to get 10% off your first purchase.
Adding threads to 3D prints does not only improve the look of them but can also improve strength and usability. I've been working on a couple of comments and suggestions from the last videos on that topic. We'll be testing the strength of Böllhoffs Helicoils as well as embedded nut and compare that to the strength of heat-seated inserts. We'll also take a look at the strength assessment of these connections and see how they compare to our test results!
Website article: www.cnckitchen.com/blog/helicoils-threaded-insets-and-embedded-nuts-in-3d-prints-strength-amp-strength-assessment
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
Join as a YouTube member!
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
? Buy inserts and helicoils:
Helicoil Kit on AMAZON (aff): https://geni.us/coI5l
Generic Thread Repair Kit: (aff): https://geni.us/HfAgb
Ruthex inserts (EU only) (aff): https://geni.us/wzkg
Similar ones on Aliexpress (aff):
M3 - http://s.click.aliexpress.com/e/3YklOajW
M4 - http://s.click.aliexpress.com/e/EhSWjajQ
M5/M6 - http://s.click.aliexpress.com/e/npG5PrJS
?Check out my PODCAST with Tom Sanladerer
https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
? Related videos:
Comparing the strength of inserts of different price: https://youtu.be/G-UF4tv3Hvc
Threaded inserts in 3D prints: https://youtu.be/iR6OBlSzp7I
Strength of glued connections: https://youtu.be/JSff8OMRHtw
DIY Universal Test Machine: https://youtu.be/uvn-J8CbtzM
⚙ My gear (Affiliate Links):
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
30mm f2.8 macro - Great Macro Lens (80% of my videos): https://geni.us/vEwqD
10-25mm f1.7 - Awesome Lens: https://geni.us/ZTBH
12-35mm f2.6 - Great Allround Lens: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel Lens: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
Follow me on Twitter: https://twitter.com/cnc_kitchen
Follow me on Instagram: https://www.instagram.com/cnckitchenyt/
DISCLAIMER: This video was sponsored by Squarespace.
...
https://www.youtube.com/watch?v=2wRc1KbEAU8
Start your Squarespace free trial today at http://www.squarespace.com/cnckitchen and use code CNCKITCHEN to get 10% off your first purchase.
Let me show you how I built a hand-cranked shredder for recycling plastic waste. I want to use the shredded material to 3D print new parts from it. The shredder was sourced from the Precious Plastics Bazar and delivered as a box of sheet metal parts. Assembly was quiet easy only getting a proper hand crank was a challenge. I ended up with a 80cm long 25x25mm steel tube that is attached to the shaft via a laser-cut adapter. Similar particle size is very important during the process so I designed stackable and 3D-printable sieves that are used to obtain the different particle fractions.
Website article: www.cnckitchen.com/blog/87dmuenxzk111r2reov2wpt2ybojdv
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
Join as a YouTube member!
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
?Check out my PODCAST with Tom Sanladerer
https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
?Further information:
Precious Plastics: https://preciousplastic.com/
Hand crank adapter: https://www.prusaprinters.org/prints/25994-hand-crank-adapter-for-plastics-shredder
Stackable Sieves: https://www.prusaprinters.org/prints/25990-stackable-sieves
Direct Pellet Extruder: https://mahor.xyz/
Filastruder: https://www.filastruder.com/
⚙ My gear (Affiliate Links):
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
30mm f2.8 macro - Great Macro Lense (80% of my videos): https://geni.us/vEwqD
10-25mm f1.7 - Awesome Lense: https://geni.us/ZTBH
12-35mm f2.6 - Great Allround Lense: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel lense: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photoraphy: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
Follow me on Twitter: https://twitter.com/cnc_kitchen
Follow me on Instagram: https://www.instagram.com/cnckitchenyt/
Disclaimer: This video was sponsored by Squarespace.
...
https://www.youtube.com/watch?v=HsKYVhCVPV0
Check out the Wham Bams HotBox, MUTANT Tool Swapping System, and their flexible build plates: https://whambam3d.com/
The Filament Star, that I found at the Midwest RepRap Festival 2022, is a 3D printing tool head that rotates to switch tools. Jerry and Jack Fisher from US 3D LLC implemented this concept on their Ender-5 together with a DUET and extension board. Due to the modularity of the tool plate, you can't only mount hotends on it but even use it with dissimilar tools like pens. Let's find out more!
Diabase H-Series: https://www.diabasemachines.com/hseries
Proper Printing Rocker Toolhead: https://properprinting.pro/product/dual-extrusion-system-for-creality-printers-aka-the-rocker/
DUET CAN Toolboard: https://duet3d.com/duet3toolboard1lc
TAMV - Tool Alignment Machine Vision: https://youtu.be/1nGc_hFzK0s
Check out our CNC Kitchen products:
Our Store: https://cnckitchen.store/
Reseller: https://www.cnckitchen.com/reseller
Amazon DE (EU Shipping): https://amzn.to/3MrRUfi
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
Join as a YouTube member!
Merch: https://teespring.com/stores/cnckitchen
Buy an Original Prusa i3 printer: https://geni.us/CNCKPrusa
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
Shop at E3D: https://geni.us/CNCK_E3D
?Check out The Meltzone Podcast: https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
⚙ My gear (Affiliate Links):
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
30mm f2.8 macro - Great Macro Lens (80% of my videos): https://geni.us/vEwqD
10-25mm f1.7 - Awesome Lens: https://geni.us/ZTBH
12-35mm f2.6 - Great Allround Lens: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel Lens: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
Follow me on Twitter: https://twitter.com/cnc_kitchen
Follow me on Instagram: https://www.instagram.com/cnckitchenyt/
Chapters
00:00 Introduction
00:23 Rotating Tool Heads
00:52 Filament Star
04:08 Sponsor section
DISCLAIMER: Part of this video was sponsored by Wham Bam.
#3Dprinting #toolchanger #mrrf2022
...
https://www.youtube.com/watch?v=xXM4liUgNNU
I re-tested the strength of 3D printed parts when using a filament oiler. This time I was using vegetable oil instead with surprising results!
It obviously makes a difference what type of oil you are using. Vegetable oil is much better than machine oil!
First Filament Oiling video: https://www.youtube.com/watch?v=6lCiXvYzy48
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
?Check out my PODCAST with Tom Sanladerer
https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
⚙ My gear (Affiliate Links):
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
10-25mm f1.4 - Awesome Lense: https://geni.us/ZTBH
30mm f2.8 macro - Great Macro Lense: https://geni.us/vEwqD
12-35mm f2.6 - Great allround lense: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel lense: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photoraphy: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
? Even watching the ads before my videos helps me a lot!
?Follow me on Twitter: https://twitter.com/cnc_kitchen
...
https://www.youtube.com/watch?v=yY7ZrVE8eks
Check out the Wham Bams HotBox, MUTANT Tool Swapping System, and their flexible build plates: https://whambam3d.com/
This 3D printer is mostly 3D printed. Not because it's cheaper or better performing than comparable machines; it's 3D printed because John wanted to find out how far he can go with this idea! Let's take a look at this awesome maker project from the Midwest RepRap Festival 2022!
Mulbot Mostly Printed 3D Printer: https://github.com/3dprintingworld/Mulbot
3D Printing World Website: https://www.dddprintingworld.com/
John's other designs (puzzle boxes, print-in-place models...): https://thangs.com/designer/3dprintingworld
Check out our CNC Kitchen products:
Our Store: https://cnckitchen.store/
Reseller: https://www.cnckitchen.com/reseller
Amazon DE (EU Shipping): https://amzn.to/3MrRUfi
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
Join as a YouTube member!
Merch: https://teespring.com/stores/cnckitchen
Buy an Original Prusa i3 printer: https://geni.us/CNCKPrusa
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
Shop at E3D: https://geni.us/CNCK_E3D
?Check out The Meltzone Podcast: https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
⚙ My gear (Affiliate Links):
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
30mm f2.8 macro - Great Macro Lens (80% of my videos): https://geni.us/vEwqD
10-25mm f1.7 - Awesome Lens: https://geni.us/ZTBH
12-35mm f2.6 - Great Allround Lens: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel Lens: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
Follow me on Twitter: https://twitter.com/cnc_kitchen
Follow me on Instagram: https://www.instagram.com/cnckitchenyt/
Chapters
00:00 Introduction
00:33 The 3D Printed 3D Printer
02:58 MRRF 2022
03:30 Sponsor section
DISCLAIMER: Part of this video was sponsored by Wham Bam.
#3Dprinting #making #mrrf2022
...
https://www.youtube.com/watch?v=T5mJus0-5e0
Head to http://squarespace.com/CNCKITCHEN to save 10% off your first purchase of a website or domain using code CNCKITCHEN.
I tested 11 different extruders for 3D printers to find out which is the strongest!
Check out our *CNC Kitchen products* at https://cnckitchen.store/ or at resellers https://www.cnckitchen.com/reseller and on AMAZON (EU) https://geni.us/s8rYtQ
*More on the extruders (affiliate)*
Bondtech BMG: https://geni.us/oUch
E3D Hemera: https://geni.us/6lV8
E3D Hemera XS: https://geni.us/1bHnP
Orbiter 2.0: https://geni.us/A9STI
Mellow Cannon (new version): https://geni.us/6VGL
Bondtech LGX: https://geni.us/xrTN
Dropeffect OmniaDrop (V3): https://geni.us/7dMS9h
Dyze Xtruder Pro: https://geni.us/fcr8l5h
Proper Extruder: https://geni.us/DlA6
OMG V2 Extruder: https://geni.us/vGJG
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
Join as a YouTube member!
Merch: https://teespring.com/stores/cnckitchen
Buy an Original Prusa i3 printer: https://geni.us/CNCKPrusa
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
Shop at E3D: https://geni.us/CNCK_E3D
?Check out my Podcast with Thomas Sanladerer: https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
⚙ My gear:
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
30mm f2.8 macro - Great Macro Lens (80% of my videos): https://geni.us/vEwqD
10-25mm f1.7 - Awesome Lens: https://geni.us/ZTBH
12-35mm f2.6 - Great Allround Lens: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel Lens: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
Follow me on Twitter: https://twitter.com/cnc_kitchen
Follow me on Instagram: https://www.instagram.com/cnckitchenyt/
Chapters
00:00 Introduction
02:10 Test Setup
03:19 Ender-3 Extruder
04:38 Bondtech BMG
05:38 E3D Hemera
06:52 E3D Hemera XS
08:00 Orbiter 2.0
09:25 Mellow Cannon
11:15 Bondtech LGX
12:45 Dropeffect OmniaDrop
13:59 Dyze Xtruder Pro
15:12 Proper Extruder
16:28 OMG V2 Extruder
17:24 Summary
#3Dprinting #StrengthTest #CNCKitchen
DISCLAIMER: Part of this video was sponsored by Squarespace.
FTC Disclaimer: A percentage of sales is made through Affiliate links
...
https://www.youtube.com/watch?v=SRyUhA_hCXE
Are 3D printed materials affected by disinfecting them with common 70% Isopropyl alcohol? I printed parts in PLA, PETG, ASA, ABS, PP, Nylon, HIPS, PC, TPU and resin, submerged them in IPA for 48h and tested their strength!
Website article: www.cnckitchen.com/blog/effect-of-disinfectant-70-ipa-on-common-3d-printing-materials
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
Join as a YouTube member!
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
?Check out my PODCAST with Tom Sanladerer
https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
? Get the materials:
Redline Filament PLA (aff): https://geni.us/AU1Pv76
DasFilament PETG: https://www.dasfilament.de/filament-spulen/petg-1-75-mm/
Prusament ASA: https://geni.us/Mgqe
Hobbyking HIPS (aff): https://geni.us/7b80
Hobbyking Premium PC (aff): https://geni.us/fU00iAM
Fiberthree PA12: https://www.fiberthree.com/filaments
Formfutura PP: https://www.formfutura.com/shop/category/pp-centaur-pp-polypropylene-199
Extrudr TPU: https://www.extrudr.com/en/products/catalogue/?material=117
Esun ABS (aff): https://geni.us/2Oc8eo
Elegoo Blue resin (aff): https://geni.us/dcYmW7e
WhamBam HotBox (15% discount with code "CNCKitchen") (aff): https://geni.us/8Ac0B7
Elegoo Mars on AMAZON (aff): https://geni.us/2LZ1OZc
⚙ My gear (Affiliate Links):
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
30mm f2.8 macro - Great Macro Lense (80% of my videos): https://geni.us/vEwqD
10-25mm f1.7 - Awesome Lense: https://geni.us/ZTBH
12-35mm f2.6 - Great Allround Lense: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel lense: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photoraphy: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
Follow me on Twitter: https://twitter.com/cnc_kitchen
Follow me on Instagram: https://www.instagram.com/cnckitchenyt/
...
https://www.youtube.com/watch?v=txrXX0CQHhU
Check out AURAPOL 3D Filament with PLA starting at only 15€ per kg! https://www.aurapol.com/ or on AMAZON Deutschland https://geni.us/aurapol3d
I wanted to find the best glow in the dark filament, so I tested 10 different ones for their look, glow and how much they destroy your printer nozzle.
Check out our *CNC Kitchen products* at https://cnckitchen.store/ or at resellers https://www.cnckitchen.com/reseller and on AMAZON (EU) https://geni.us/s8rYtQ
Glow in the Dark STLs: https://cnckitchen.store/products/glowinthe-dark-cad-models-for-download
*All tested filaments (affiliate)*
Overture Green (winner): https://geni.us/3DYcmEI
colorFabb glowFill (nicest): https://geni.us/jPYuZbM
Nobufil Green: https://www.nobufil.com/product-page/glow-in-the-dark-green
Amolen Green: https://geni.us/xPJZat3
DasFilament V2: https://www.dasfilament.de/filament-spulen/pla-1-75-mm/122/pla-filament-1-75-mm-glow-gruen-v2?c=11
Nobufil Blue: https://www.nobufil.com/product-page/glow-in-the-dark-blue-filament
Amolen Blue: https://geni.us/K0NW
Tronxy Rainbow: https://geni.us/j9Ct
Amolen Sparkle Green: https://geni.us/phnkXA
R3D Ultra Red (ultra stinky): https://geni.us/Cckkzs
3DO nozzle camera: https://github.com/3DO-EU/nozzle-camera
Geiger Counter Kit: https://s.click.aliexpress.com/e/_DdKUHWV
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
Join as a YouTube member!
Merch: https://teespring.com/stores/cnckitchen
Buy an Original Prusa i3 printer: https://geni.us/CNCKPrusa
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
Shop at E3D: https://geni.us/CNCK_E3D
?Check out my Podcast with Thomas Sanladerer: https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
⚙ My gear:
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
30mm f2.8 macro - Great Macro Lens (80% of my videos): https://geni.us/vEwqD
10-25mm f1.7 - Awesome Lens: https://geni.us/ZTBH
12-35mm f2.6 - Great Allround Lens: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel Lens: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
Follow me on Twitter: https://twitter.com/cnc_kitchen
Follow me on Instagram: https://www.instagram.com/cnckitchenyt/
Chapters
00:00 Introduction
01:17 Are Glow in the Dark filaments radioactive?
03:18 Sponsored
04:28 What did I test?
05:10 How do they look?
06:03 How thick do you need to print them?
06:42 Which is the brightest filament?
09:18 How they wear out your nozzle!
11:34 Summary
#3Dprinting #GlowInTheDark #CNCKitchen
DISCLAIMER: Part of this video was sponsored by Aurapol 3D filament.
FTC Disclaimer: A percentage of sales is made through Affiliate links
...
https://www.youtube.com/watch?v=ODQoQd-0ky8