**MAGAZINE POUCH MEGA PACK!!** It included any combination from the following attributes: Attaching method - Cloth loop molle, laser cut molle, 1.5" gun belt, competition belt Compatibility - Handgun, SMG, Rifle Configuration: Single decker, Double decker, Double decker for single stack handgun
This is my latest comprehensive design for magazine pouches. All my old designs are discontinued and will probably be deleted. Please do not download my old magazine pouch designs. I am really burned out on this project and probably will not update it anymore. I don't think it needs anymore update neither.
**Tested magazines:**
Glock 9mm/.45, CZ TSO 9mm, USP .45, Pardini 9mm, Hudson H9 9mm, Keltec CMR-30/CP33.1911, Tokarev, CZ 52, Luger P08, S&W Model 41, and HK P7.
Intermediate – STANAG, AK-47/74, CZ Bren 2 7.62*39 Full power – SCAR-17, FAL, SR-25 12GA – JTS M12AR
Single decker SMG pouch can fit 1 UMP 45 magazine but double decker cannot fit 2 of them. Sig MPX magazines are also very tight for the double decker. I don’t recommend using this magazine pouch with old SMG such as Sten or Grease gun because the half-moon shaped over insertion stop on their magazines will rip-off the anti-slip tape inside the magazine pouch. These old magazines fit but will cause damage to magazine pouch.
Beretta 9mm 15 round fits a bit loose in the handgun pouch. double stack Concealed carry handgun magazines with a slimmer profile may fit loose as well. Double decker for single stack handgun magazine pouch can fit two 10 round 1911 magazines but is very tight.
3D printed 37MM projectiles designed to use with payload, smoke or flare. Regular PLA is sufficient.
Print the base plate solid, 99 walls or 3-5 walls with 100% infill. The rest can be printed with 3 walls and 15% infill.
The hole in top cap can accommodate a .450 projectile as counterweight. The weighted top cap and the fin will make the projectile fly like a badminton ball.
2323/12/19 update: 2 more head caps to fit 14.5mm M183 lead point detonating projectiles.
Vertical and Horizontal wall mount for your long guns.
Current wall mounts on the market can be categorized in the following 3 types:
1. Universal but only fits fuddy hunting rifle and shotguns;
2. Only fits AR-15;
3. Universal but requires proprietary mounting base fastened to your wall, such as peg board, ModWall, slot wall panel, etc.
My design is Compatible with almost all shoulder fired small arms in the world (excluding crew served weapon). Personally I have tried AK-47\74, AR-15, M1 Garand, Hakim, FS-2000, L85(airsoft), UMP(airsoft) and SCAR 17S. They all fit.
It also requires no special wall panel. You can fasten these mounts with #8 wood screws.
I designed a charging handle for CZ TSO.
Second part of this video shows it can take a considerable amount of abuse. Assembling demonstration and file will be up soon.
Gen 1 uses the HAVOC factory 0.5" long 1/4-20 set screw to mount the launcher to the top rail by friction. These set screws pushes the launcher against the top rail.
One of my customer said he doesn't think it is a safe way to attach the launcher to the stock. Thus I improved my design. Gen 2 replaces the friction mount with actual screw mount. The under side of top rail is smooth now with only 2 holes for 1/4-20 brass inserts. You will also need 2 0.75" long 1/4-20 set screws to replace the factory one.
Parts necessary for this stock:
3× M5 nuts,
1×M5×30 bolt,
1×M5×35 bolt,
1× M5×70 bolt,
1× M5 washer,
2× 1/4-20 brass inserts,
2× 0.75" long 1/4-20 set screws,
0.25"×0.25"×5.5" rod (metal or wood).
A video demonstration showing my improved CMR/PMR/CP-33 extended bolt release button.
Download link here: https://odysee.com/@FecalDisco:e/CMR_bolt_release:a
Weights 7.97 ounce (226 Gram).
Printed with PLA, filled with #8 leadshot and sealed with resin. If I can shape lead into ingots that fits perfectly inside the weight can be raised to 300 gram plus.
Should fit any Glock clone with picatinny rail. May not fit original Glock. Needs a M5 0.8*30 bolt and a M5 nut to assemble.
Compared to other match weights on the market, it is compatible with suppressor with no clearance issue but lost the potentially negligible compensator function.
See my reddit post for more pictures: https://www.reddit.com/r/fosscad/comments/odw47v/i_designed_a_glock_34_match_weight_for_glock/
I designed a modular universal handgun holster which can be mounted on molly and belt. For people who shoots more than 1 handgun during each range trip and will draw them from a holster, buying a lot of gun specific holsters and swapping them on gears is a big hassle. Especially for rare guns which often requires custom made holsters. My universal holster can accommodate a wide range of handguns even if they have light, weight, red dot, or suppressor attached on.
Pros:
Mount on molly and 1.5"belt
Compatible with multiple handguns
Compatible with light, weight, red dot, or suppressor
Active retention
Cons:
Rattles slightly
Not compatible with frame mounted red dot, only slide mounted red dots are compatible
Anything with less than 1.46" thickness and 3.23" width will fit.
2023/02/13 Update:
Added a larger holster which is compatible with Chiappa Rhino, Beretta 92X performance, Pardini GT9, 2011. It has larger internal volume and side cutout to accommodate larger safety levers.
Added step file.
After a request from my youtube viewer, I designed these 37mm projectiles. Then I discovered that 3D printed projectiles are already available on Thingiverse and ebay.
However, I believe my design still has some advantages.
1. Higher payload capacity than fin stabilized projectiles.
2. Better gas seal than fin stabilized projectiles. Many fin stabilized projectiles use a thin blast disk to push on the projectile. My design has a fairly thick tight fitting with a gas ring to further improve sealing.
3. Screwed on bottom is better than fricting fitted ones as seen on some designes on Thingiverse. They will not come loose. Especially after applying epoxy to the threads.
4. Boat tail design is better for aerodynamic in theory.
The file is live on LBRY. It contains 50mm and 90mm shells that corresponding to 3 and 4.5 inch long casing from exotic firearms. There are vented and closed versions for each length of shells for smoke and flair. The flat base plate is for casing with built in powder busing while the base plate with internal powder bushing is for older casings. There are two versions for the screw on end cap, too. The hand tighten only version has no wrench cutout so it will be the best for aerodynamic. But you may need to glue the thread. Another version has flat cutout so you can tighten it with a wrence. But the cutout may negtively impact aero dynamic.