MK Ultra Porsche 959 with 3D printed wheels and tires
Music: Flames by Dan Henig from Youtube's library.
Trying the 3D printed rally tires on gravel. They have ok grip and good controllability on loose surfaces like gravel and sand. Terrible on hard surfaces though.
Electric ESM Tigercat low pass. Three blade 21" x 14.5" props.
Dummy engines are 3D printable: http://cults3d.com/en/various/dummy-radial-engine
Semi scale wheels are 3D printable: http://cults3d.com/en/various/wheel-set-for-esm-f7f-tigercat
Shot with Engine video recorder glasses: http://www.ebay.com/itm/311421654591
...
https://www.youtube.com/watch?v=PmsiJEhSfVU
A little flight with my Lockheed L-100 Hercules before going home on friday evening. It was almost 22:00 in the evening when I landed. There is usually no wind that late so it's the perfect time to fly the light Hercules.
...
https://www.youtube.com/watch?v=NmxcCTeFHto
First flight with an onboard camera on my EL-39. The camera is a Foxeer Legend 2 camera. The wifi app doesn't work so I had to leave it on stock settings, so disregard the date and clock.
If you're new to my channel, this jet is almost completely 3D printed, including the EDF unit and landing gear.
Length: 1858,5 mm
Wingspan: 1451 mm
All up weight: 7,5 kg
The STL files can be purchased here:
https://cults3d.com/en/3d-model/various/el-39-semi-scale-rc-jet-for-120-mm-edf
...
https://www.youtube.com/watch?v=_93jys9oADY
Here's how you're supposed to remove and install the Badger body. I don't like body clips so I try to design stuff to clip on.
Badger is my new FWD buggy design. 3D printable files here:
https://cults3d.com/en/3d-model/various/badger-1-10-scale-front-wheel-drive-rc-buggy
...
https://www.youtube.com/watch?v=q91jytkKw70
These two models are the same size and resemble the same full size plane, but are different in almost every other way. One is built from balsa and covered in film and powered by a 90 mm EDF and the other is 3D printed from PLA and powered by a 120 mm fan. The Blackhorse L-39is about 2 kg lighter than the EL-39.
...
https://www.youtube.com/watch?v=7E_7e1s38vU
Third flight and I managed to mess it up again because I'm a moron. Top speed on this flight was 228 km/h ground speed (GPS).
1:4,5 scale
1996 mm long
1580 mm wingspan
7,5 kg weight
...
https://www.youtube.com/watch?v=c0MWYCIPg6g
Running the motors at slow speed and waving the controls around.
It's ready for the maiden flight now. Just have to wait for warmer weather.
Prototype specs:
Wingspan: 610 mm
Length: 433 mm
AUW: 116,6 g
Download and print yours:
https://cults3d.com/en/3d-model/various/micro-c-130-hercules-rc-model
https://www.thingiverse.com/thing:3411464
...
https://www.youtube.com/watch?v=kfjYvQrwlgU