Published By
Created On
19 Oct 2022 03:40:10 UTC
Transaction ID
Cost
Safe for Work
Free
Yes
CZAR V3 Testing
Doing a little testing with the CZAR V3 - an update to the CZAR V2 by FMDA1776. The update builds on the V2 improvements with better ergonomics, a little easier to print design, and a tweak to the hammer location to eliminate the binding between the hammer and bolt some users ran into.
--------------------------------------------------------------------------------------------------------------
I'm Ivan - a fella who works to document and record the history and technical background of the development of homemade firearms.
You can support me directly on Utreon - https://utreon.com/c/ivanthetroll/
You may know me from my work with ARES Research to help author reports about this topic - this channel shows the "behind the scenes" testing that goes into building the body of knowledge requied.
Regardless of if you are here for the research, technology, or just to see some funky looking guns tested, I hope you enjoy.
**All firearms shown and tested are done so in full compliance will all applicable laws. All test firing and use of firearms is conducted on a properly zoned, legally operated firing range.**
...
https://www.youtube.com/watch?v=evq3Il6S4Uo
--------------------------------------------------------------------------------------------------------------
I'm Ivan - a fella who works to document and record the history and technical background of the development of homemade firearms.
You can support me directly on Utreon - https://utreon.com/c/ivanthetroll/
You may know me from my work with ARES Research to help author reports about this topic - this channel shows the "behind the scenes" testing that goes into building the body of knowledge requied.
Regardless of if you are here for the research, technology, or just to see some funky looking guns tested, I hope you enjoy.
**All firearms shown and tested are done so in full compliance will all applicable laws. All test firing and use of firearms is conducted on a properly zoned, legally operated firing range.**
...
https://www.youtube.com/watch?v=evq3Il6S4Uo
Author
Content Type
Unspecified
video/mp4
Language
English
More from the publisher
Controlling
VIDEO
MAGDU
magdumping-a-3d-printed-mp5-10-40-build
Got the 10/40 working with the flangless upper. Still need to square away the bolt hold open, but getting closer.
--------------------------------------------------------------------------------------------------------------
I'm Ivan - a fella who works to document and record the history and technical background of the development of homemade firearms.
You can support me directly on Utreon - https://utreon.com/c/ivanthetroll/
You may know me from my work with ARES Research to help author reports about this topic - this channel shows the "behind the scenes" testing that goes into building the body of knowledge requied.
Regardless of if you are here for the research, technology, or just to see some funky looking guns tested, I hope you enjoy.
**All firearms shown and tested are done so in full compliance will all applicable laws. All test firing and use of firearms is conducted on a properly zoned, legally operated firing range.**
...
https://www.youtube.com/watch?v=wICL_ZUV-Es
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
KF5 M
kf5-magdump-(3d-printed-mp5)
More testing video of the KF5. It's pretty dang fantastic.
-------------------------------------------------------------------------------------------------------------------------
I'm Ivan - a fella who works to document and record the history and technical background of the development of homemade firearms.
You can support me directly on Utreon - https://utreon.com/c/ivanthetroll/
You may know me from my work with ARES Research to help author reports about this topic - this channel shows the "behind the scenes" testing that goes into building the body of knowledge requied.
Regardless of if you are here for the research, technology, or just to see some funky looking guns tested, I hope you enjoy.
**All firearms shown and tested are done so in full compliance will all applicable laws. All test firing and use of firearms is conducted on a properly zoned, legally operated firing range.**
...
https://www.youtube.com/watch?v=DpLm1Bxs8W4
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
'3011
'3011'-3d-printed-1911-frame-4
A couple changes to this frame - it now takes AR15 grips, has a working safety, an integral red dot mount, and has a 1913 rail rear end for stocks and braces. I also changed the ejector geometry to make it a little more solidly mounted, and that seems to have resolved ejection issues. I do misspeak and refer to the ejector (obviously a 1911 ejector) as an AR15 ejector - this is an error.
Next steps will be getting a printable folding brace/stock, and potentially exploring other magazine options.
...
https://www.youtube.com/watch?v=s8Fu6ogda6M
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
3D PR
3d-printed-mp5-drum-mag-dump
Dumping my 29 round drum mag with very good editing to make it look like it has 50 rounds because I would never break the youtube TOS
--------------------------------------------------------------------------------------------------------------
I'm Ivan - a fella who works to document and record the history and technical background of the development of homemade firearms.
You can support me directly on Utreon - https://utreon.com/c/ivanthetroll/
You may know me from my work with ARES Research to help author reports about this topic - this channel shows the "behind the scenes" testing that goes into building the body of knowledge requied.
Regardless of if you are here for the research, technology, or just to see some funky looking guns tested, I hope you enjoy.
**All firearms shown and tested are done so in full compliance will all applicable laws. All test firing and use of firearms is conducted on a properly zoned, legally operated firing range.**
...
https://www.youtube.com/watch?v=5WFUQXSNsJY
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
PLAST
plastikov-100-rapid-fire-(3d-printed-akm
A little artsy magdump with the Plastikov 100. It's basically just a Plastikov v2, alterted to take 100-series parts kits. You can't really find 100-series kits, I just managed to luck out and find one - but it's not really any better than a run of the mill AKM.
...
https://www.youtube.com/watch?v=JmbmiEhw_Wg
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
HUNGA
hungarian-surplus-glove-review
Today we review these gloves. I like them. They do pretty good. We do a variety of simple tasks to test these gloves out to ensure they are up to the job!
--------------------------------------------------------------------------------------------------------------
I'm Ivan - a fella who works to document and record the history and technical background of the development of homemade firearms.
You can support me directly on Utreon - https://utreon.com/c/ivanthetroll/
You may know me from my work with ARES Research to help author reports about this topic - this channel shows the "behind the scenes" testing that goes into building the body of knowledge requied.
Regardless of if you are here for the research, technology, or just to see some funky looking guns tested, I hope you enjoy.
**All firearms shown and tested are done so in full compliance will all applicable laws. All test firing and use of firearms is conducted on a properly zoned, legally operated firing range.**
...
https://www.youtube.com/watch?v=YnydNZRwyjU
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
PLAST
plastikov-v4-draco-style
Moved the Draco kit over to a v4 receiver. A couple tweaks have been made since the initial v4 prototype. Still have a few more tweaks to experiment with as well.
--------------------------------------------------------------------------------------------------------------
I'm Ivan - a fella who works to document and record the history and technical background of the development of homemade firearms.
You can support me directly on Utreon - https://utreon.com/c/ivanthetroll/
You may know me from my work with ARES Research to help author reports about this topic - this channel shows the "behind the scenes" testing that goes into building the body of knowledge requied.
Regardless of if you are here for the research, technology, or just to see some funky looking guns tested, I hope you enjoy.
**All firearms shown and tested are done so in full compliance will all applicable laws. All test firing and use of firearms is conducted on a properly zoned, legally operated firing range.**
...
https://www.youtube.com/watch?v=c6S8HoyVohM
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
$100
100-3d-printed-1911-build-'3011'-3d
A side chapter in my 3011 antics - a cheap Llama MiniMax45 (1911 knockoff) kit that I picked up running on one of the 3011 test frames.
Is it ugly? Yes, it's a test frame. Does it run? You betcha she runs.
...
https://www.youtube.com/watch?v=Emtk5GWc4O8
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
3D PR
3d-printed-walther-p99-frame-first
You can see the bullets in flight, pretty cool
--------------------------------------------------------------------------------------------------------------
I'm Ivan - a fella who works to document and record the history and technical background of the development of homemade firearms.
You can support me directly on Utreon - https://utreon.com/c/ivanthetroll/
You may know me from my work with ARES Research to help author reports about this topic - this channel shows the "behind the scenes" testing that goes into building the body of knowledge requied.
Regardless of if you are here for the research, technology, or just to see some funky looking guns tested, I hope you enjoy.
**All firearms shown and tested are done so in full compliance will all applicable laws. All test firing and use of firearms is conducted on a properly zoned, legally operated firing range.**
...
https://www.youtube.com/watch?v=tR6fw-5ZUgs
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English