1.1. The machine adopts the world's leading technology from Italy, washing section and metal plate contacted with water are made of stainless steel. Washing section is made of welded thickened stainless-steel material, which has high strength and no distortion. Top of the machine is made of stainless-steel panel which added 8mm steel panel. Bottom of the machine is 5mm stainless steel panels; Side and middle separate panel is 2mm stainless steel panels; metal plates of other parts are painted with top-grade machine paint or powder coating. The machine can be applied for connecting with single edger line, vertical CNC working center, vertical drilling machine and other equipment. 1.2 Low-e glass detecting system(adopt Autonics from Korea ),it can automatically recognize the pros and cons side of coated glass, two hard brushes can be automatically back to avoid the coating side get damage. (This function is an option, not standard). 1.3 The machine has three pairs of brushes: six pcs Ø160mm high temperature resistant brush + four times spray, it makes glass clean and the speed fast. Tow hard brushes can be lift by air cylinder of Low-e function. 1.4The machine with stainless steel spring which can automatically adjust glass thickness from 3mm to 12mm. 1.5 Parts and screws contacted with water in the washing section are made of stainless steel, brass, water-proof aluminum, nylon and other materials, which will not be rust for long time and easy for maintenance. 1.6 Part of gear drive is connected in key type, which will not be in displacement for long time. (some factories used jack screw fixed which is not stable). 1.7 Drying cabinet and glass support frame are made of welded stainless steel.The machine won't be rust for long time and does not make the glass dirty again. 1.8 The machine has one pair of special-made stainless steel air knife with separate circular wind to drying glass and with air heating system, which is energy -saving and low noise. (no need air heater it can be reached 40ºC in winter)

Rectangular glass edge chamfer of professional processing equipment. High precison,High efficiency,High Energy-saving mechanical,Configuration of intelligent assemble become the strongest equipment in this process territory. Technical Parameters: Human-computer interface,PLC control,indentify glass sizes automatically. Chamfering processing speed is up to 30m/min. Suitable processing different size architectural glass,window and door hollow glass and LOW-E glass. Our website is chinaglassmachines.com aglasstec.com fgtechgroup.cn