for element14 blog https://community.element14.com/technologies/fpga-group/b/blog/posts/try-the-digilent-xadc-demo
...
https://www.youtube.com/watch?v=fcVwogujopg
I developed a SCPI interface for Raspberry Pi with PiFace. You can control the outputs and Relays over the network via SCPI.
Here I use it in a setup with a Keithley DMM6500 (used both as current and voltmeter) to bypass the current shunt when doing volt measurements.
Blog: https://www.element14.com/community/community/raspberry-pi/blog/2018/08/07/scpi-on-a-linux-board-part-5a-labview-driver-for-open-close-and-switch-functions
...
https://www.youtube.com/watch?v=82tcwf1QZfw
Luyten Cumps 199?
rockschot of rockmarathon?, parochiezaal vinea Aarschot
Bruno Goedhuys drum, Jan Cumps gitaar, Philip Luyten zang & bas
...
https://www.youtube.com/watch?v=FCavnEgM9fg
turn a BBC micro:bit into a LabVIEW pass and fail indicator.
SCPI programmable
It will perform two functions:
- display a + or X if a test passes or fails. A physical indicator for the test operator.
- drive an output high if a test passes and another one if a test fails. This can be used to drive a buzzer or, in a full automatic setup, to push the failed device off the production line into a rework bin.
blog:
https://www.element14.com/community/community/project14/test-instrumentation/blog/2018/10/30/microbit-as-pass-fail-indicator-in-an-automated-test-setup
...
https://www.youtube.com/watch?v=5um1LvclLbA