FrSky Taranis X9D RC Transmitter Combo Pack Review Definitely a cool RC Radio. Can be configured for 16 channels, has open source firmware and a JR module bay. Combo pack comes with a carrying case, TX, X8R rx, neck strap, and battery. In addition I also take a look at the EZUHF long range tx module from Immersion RC.
2012-03-23 In this video I convert a HobbyZone Champ RC Plane from a brushed motor to a brushless power system and then take it for a test flight. Original Champ weight was 37 grams and this one weighs 45 grams, both with no battery.
I am testing a HobbyKing Turnigy 5A 1S Brushless ESC connected to a Spektrum AR6300 receiver and a small 160mah 1 cell LiPo battery.
However this is also a build video because all I have to start with is a Champ fuselage. That's right, I have to make all the wings myself so basically it is a scratch build. This has some handy tips such as how to make a rudder hinge and how to make Z bends for the control rods. There is also a trick for forming dihedral in the main wing.
There is link below to a video on how to make the airfoil in the wing by rolling the Depron.
Also I have built a Champ Bipe, see links below to those videos.
See Part II on using the AP03 4000kv brushless motor and 5030 prop
and use of various batteries.
http://www.youtube.com/watch?v=GQM2tssaNlk
Also see Building a Scramp or Scratch Built Champ with Removable Wing:
http://www.youtube.com/watch?v=_pihhJ6wJ4M
And see the Scramp Bipe with removable wings!
http://www.youtube.com/watch?v=TQM1p7Mbtq4
How to make the wings with airfoil.
http://www.youtube.com/watch?v=LQaX14djWXw
Parts List
1. GWS 3020 Prop HK-10038
2. Prop Saver for 1.5mm shaft BP Hobbies
3. Micro brushless AP03 7500kv motor from HK-9663
4. Turnigy 5A 1S Brushless ESC HK-10334
5. Spektrum 6 Channel Receiver AR6300
6. Two linear servos HK-11735 or 11737
7. Turnigy nano-tech 160mah 1S 25~40C Lipo battery HK-11893
8. 2mm Depron foam sheet for wing.
9. .03" or .04" Carbon Fiber Rods
10. Small heat shrink tubbing and small paper clips for Z-bends.
HobbyKing:
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9663
BP Hobbies:
http://www.bphobbies.com/view.asp?id=C3692002&pid=V797843
RC Foam:
http://www.rcfoam.com
-~-~~-~~~-~~-~-
Please watch: "Runcam Owl Plus Camera with Low Light PL0075 Lens Installed for Night FPV RC Flying"
https://www.youtube.com/watch?v=J5CrWcX20P8
-~-~~-~~~-~~-~-
...
https://www.youtube.com/watch?v=8WWRHL4Vy44
Installing the 3DR uBlox GPS with Compass Module on 3DR Ardupilot Mega 2.6:
http://plane.ardupilot.com/wiki/common-installing-3dr-ublox-gps-compass-module/
APM 2.6 Set (external compass)
http://store.3drobotics.com/products/apm-2-6-kit-1
How to load 3DR script into CN-06 V2 GPS (Thanks to Chris Leech for link):
http://www.rcgroups.com/forums/showthread.php?t=1820773&page=526#post25602561
-~-~~-~~~-~~-~-
Please watch: "Runcam Owl Plus Camera with Low Light PL0075 Lens Installed for Night FPV RC Flying"
https://www.youtube.com/watch?v=J5CrWcX20P8
-~-~~-~~~-~~-~-
...
https://www.youtube.com/watch?v=lRcvtUDE3XQ
It actually does fly despite the extra weight of the FPV gear, full body lamination and two 2200mah 3s Lipo batteries. AUW is about 48-50 ounces. I will add decals to it later.
https://youtu.be/e0GGpm28eoQ
The video transmitter was a lemon with a solder short inside causing intermittent loss of video. When I got home I opened up the can of the VTX, Jon found the short and I removed it.
Next test will be flying it off the grass to see how it does with that.
Seem like a good flying plane although it can be sensitive to the wind. The auto level from the Vector flight controller really helped counter the wind gusts.
P.S. Even though the plane is obviously built now I will continued to post the build videos as I edit the footage.
Thanks for watching.
Parts:
ModelAero.com Polaris XL w/Blue-Yellow decal set
Prop: Master Airscrew 8 x 6 3 blade
Motor: Spin Max 2810-9 (1350 kv)
ESC: Spin Max 40 amp ESC
Heatsink: ESC Heat Sink
Servos: 11 gram metal gear servos (3 pcs)
Receiver: EZUHF LRS
Batteries: 2x 2200 3S LiPo battery
Eagle Tree Vector Flight controller
Digital 800mw Video transmitter (I got a lemon)
Foxeer HS1177 CCD video camera
5volt UBEC
LC video filter
...
https://www.youtube.com/watch?v=e0GGpm28eoQ
This an announcement about my new Magix Movie Edit Pro Tutorial on my other new channel, Retired Time Productions, https://www.youtube.com/channel/UCXALzJ__bCPW9faVIP_bh4w
Please subscribe there because I am trying to build that channel just for you so you can find all my Magix Movie Edit Pro Tutorials in one place for your convenience.
Magix Movie Edit Pro 2018 Tutorial - Hidden Eye Icon to Effects Curves Revealed. In this video https://youtu.be/rwiHwYmITH0 I reveal how to find and use the Magix Eye Icon to enhance your effects editing ability. For example Hyper Speed Ramping is revealed as a bonus in this video tutorial.
Thanks for your support,
Dave Merc
Music by audionautix.com
Below are some related videos on the new channel.
Audio Volume Curves Tutorial
https://www.youtube.com/watch?v=rUxA7aHv0vs
Video Level Curves Tutorial
https://www.youtube.com/watch?v=05LbqhSU5xY
Speed Ramp Effect Tutorial
https://www.youtube.com/watch?v=O4UirjW38D8
...
https://www.youtube.com/watch?v=fKP86B8y-n8
I have been working on the Rumpler Taube for a while and never posted anything publicly until now. So this is just a feeler vid to see if anyone is even interested in such a build.
My friend Jim S gave me some plans he drafted for a geared motor version and I adapted it for brushless. Most of the video is flight testing because this is the final stages of the build.
-~-~~-~~~-~~-~-
Please watch: "Runcam Owl Plus Camera with Low Light PL0075 Lens Installed for Night FPV RC Flying"
https://www.youtube.com/watch?v=J5CrWcX20P8
-~-~~-~~~-~~-~-
...
https://www.youtube.com/watch?v=wS9zDsDEZbk
Look what I got for $98 form Walmart. It a TV that runs from a 3 Cell LiPo or 12vdc Battery.
Going to use it for my FPV ground station.
19" LED TV Part Number is ELEFW195 and price is $98 plus tax at Walmart
https://www.elementelectronics.com/el-series-195/
Testing the monitor outside, brightness is medium but adequate:
https://www.youtube.com/watch?v=eH_tyYuvS9w
don cromwell suggests:
Insignia 18.5" 720p 60Hz LED HDTV (NS-19E310A13) from BestBuy also 12volts
...
https://www.youtube.com/watch?v=2h_P1JLVzBw
This more than a Review. We do some flight testing of all the flight modes and also add a switch mod. We show what is in the box and extra parts you can purchase plus more. Also have some links under video for the manual, Tuning, and DX6i radio setup.
Dx6i and the Blade 200 SRX
http://www.horizonhobby.com/pdf/BLH2000_DX6i_addendum_EN.pdf
Got my DX6i setup on this thread:
http://answers.horizonhobby.com/answers/6449/product/BLH2080/blade-200-srx-bnf-with-safe-technology-questions-answers/questions.htm?sort=helpfula
Found this tuning document that might be useful:
http://www.horizonhobby.com/pdf/BLH2000-Gain_Adjustment.pdf
Blade 200 SRX Manual
http://www.horizonhobby.com/pdf/BLH2000-Manual_EN.pdf
RCgroups Blade 200 SRX thread
http://www.rcgroups.com/forums/showthread.php?t=2089784&highlight=Blade+200+SRX
-~-~~-~~~-~~-~-
Please watch: "Runcam Owl Plus Camera with Low Light PL0075 Lens Installed for Night FPV RC Flying"
https://www.youtube.com/watch?v=J5CrWcX20P8
-~-~~-~~~-~~-~-
...
https://www.youtube.com/watch?v=NXCQzQgR7pk
Jon and Dave fly the new quads from Helimax and do a short box opening review.
Then we take the 1Si outside to check out a big tree ;-)
-~-~~-~~~-~~-~-
Please watch: "Runcam Owl Plus Camera with Low Light PL0075 Lens Installed for Night FPV RC Flying"
https://www.youtube.com/watch?v=J5CrWcX20P8
-~-~~-~~~-~~-~-
...
https://www.youtube.com/watch?v=io0foQryTt0
This is the second update to the 3 part series on the MinNaza OSD project. This is how the MinNaza OSD system was mounted on a quad copter.
This is based on the MinNaza project wiki:
https://code.google.com/p/minnazaosd/wiki/Intro
See Part 1 here:
http://www.youtube.com/watch?v=k9r_Yu9U5rk
See Part 2 here:
http://www.youtube.com/watch?v=qWOkQqWlmiM
See Part 3 here:
http://www.youtube.com/watch?v=4Zf9QO-sk9E
See first addendum here:
http://www.youtube.com/watch?v=jg5giTRXaQY
-~-~~-~~~-~~-~-
Please watch: "Runcam Owl Plus Camera with Low Light PL0075 Lens Installed for Night FPV RC Flying"
https://www.youtube.com/watch?v=J5CrWcX20P8
-~-~~-~~~-~~-~-
...
https://www.youtube.com/watch?v=vzMJxANCjJM