This has seen alot of amazing beta testers and i think we finally have everything reliable enough to let the public also beta test, while this wont work on every AK as its just not possible to work with all of them, it should work with most AKs. Check back for updates. - V1 File Posted 05/14/2024 Base files posted no addons yet.

---Requires super safe cut trigger--- This is a 3 position push button selector made to work with the SFFA V2 it requires the super safe cut trigger in order to function. (This will not work with a uncut trigger) The detent can be left pointy but it will also work with the rounded super safe detent. Button all the way LEFT = Safe Button all the way right = Semi Button in the middle = Full auto

Install Guide for the SFFA V2 a 3d printed select fire full auto drop in. Requires a standard ar15 FCG and 1 extra bolt catch roll pin + 1 extra bolt catch spring. Download here https://odysee.com/@S3igu2:c/SF-Full-Auto-V1:1?r=C8woW2B8CK1fAKfBavCafrJo3C57WvC8

This is a open beta files will more then likely be updated SF FRT V8 (Select Fire Forced Reset Trigger) for M16 cut lowers with support for low shelf and high shelf lowers as well as SIG MCX firearms. This trigger is a mixture of Hoffman Tacticals original FRT and Klaviermeisters select fire setup with modifications. If you have any questions contact me on twitter @s3igu2 or rocket.chat @s3igu2 Non printed parts required (If you already have some of the parts here use them insted *The Hammer i linked is the only part i would highly recommend*) - x1 M16A2 burst trigger https://www.sarcoinc.com/m16a2-burst-trigger/ - x1 M16 disconnector https://www.sarcoinc.com/m16-disconnector/ - x1 AR15 disconnector spring https://www.sarcoinc.com/ar15-m16-disconnector-spring/ - x1 Full auto 3 Position selector https://www.sarcoinc.com/m16-safety-selector/ - x1 AR15 hammer (make sure it has the tail at the end) https://ar15discounts.com/products/anderson-manufacturing-mil-spec-ar-15-hammer-black/ - x1 AR15 trigger spring https://www.sarcoinc.com/ar15-m16-trigger-spring/ - x2 AR15 Trigger and hammer pins - x1 AR15 Hammer Spring - x1 AR-15 bolt hold open spring (REQUIRED for locking bar dont use other springs) https://www.sarcoinc.com/ar15-m16-bolt-catch-spring/ - x1 3/8" long by 3/32" dia I just cut down this one https://www.sarcoinc.com/ar15-m16-bolt-catch-pin/ Printed parts required - x1 AR15 SF FRT Housing With Supports - x1 Hit Arm N 00 or your needed height - x1 Locking Bar with arm for m16 cut lowers or with no arm for standard cut lowers Supported Platforms - RECOMMENDED M16 cut lower receivers with Full auto Bolt carrier group (List in files for lowers to buy "M16 cut lower list.txt") - High Shelf AR 15s with Full auto Bolt carrier group - Low Shelf AR 15s with Full auto Bolt carrier group