Published By
Created On
15 Feb 2023 20:38:10 UTC
Transaction ID
Cost
Safe for Work
Free
Yes
PDW S/B, Model 1 V1.3.2
PDW S/B, Model 1 V1.3.2: Laffs Dynamics
A short length of pull, folding stock/brace. Mounts via 4+ slot picatinny rail. Either a blade style brace,
or buttstock can be fitted in the rear socket of the folding arm.
Update V1.3.2: Redesignated design name.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5
Infill: 50%
Infill Pattern: Gyroid
Support Material Percentage: 20%
Hardware Needed:
1x M6x40mm Bolt
1x 8mm x 20mm Spring (Ender 3 Bed Spring)
Notes:
1) The M6x40mm bolt should simply pass through the hinge of the folding arm. Should the threads cut into
the hinge, dremel out the hole slightly until the bolt passes through. The bolt should only thread into the
folding mech mount's top and bottom hinge points. Be sure not to overtighten the bolt, otherwise the hinge
points could flex and squeeze together, binding the folding arm and not allowing it to articulate.
2) If the spring is too tight, simply cut off a coil to reduce pressure on the mechanism.
A short length of pull, folding stock/brace. Mounts via 4+ slot picatinny rail. Either a blade style brace,
or buttstock can be fitted in the rear socket of the folding arm.
Update V1.3.2: Redesignated design name.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5
Infill: 50%
Infill Pattern: Gyroid
Support Material Percentage: 20%
Hardware Needed:
1x M6x40mm Bolt
1x 8mm x 20mm Spring (Ender 3 Bed Spring)
Notes:
1) The M6x40mm bolt should simply pass through the hinge of the folding arm. Should the threads cut into
the hinge, dremel out the hole slightly until the bolt passes through. The bolt should only thread into the
folding mech mount's top and bottom hinge points. Be sure not to overtighten the bolt, otherwise the hinge
points could flex and squeeze together, binding the folding arm and not allowing it to articulate.
2) If the spring is too tight, simply cut off a coil to reduce pressure on the mechanism.
Author
Content Type
Unspecified
application/zip
Language
English
More from the publisher
32,000,000.00 LBC
AMMO
Ammo-Keychains
Keychains with a silhouette that is dimensionally accurate to the real life calibers they represent.
Collection 1 for handguns come in six calibers: 10mm Auto, 40S&W, .357 Magnum, .38 Special, .45 ACP, and 9x19 NATO.
Now you can continue the constant caliber wars debate. Which is better: 9mm or .45? Is 40S&W really that much better than 9mm? Or are all the calibers peashooters compared to the hand cannon 10mm?
Put multiple on your keys, show the boys what caliber you trust your life with :D
Transaction
Created
1 year ago
Content Type
Language
application/zip
English
Controlling
STRID
Strider-Grip,-Angle-Cut
Strider Grip, Angle Cut (AR-15): Laffs Dynamics
Variant of the Strider Grip, with it's heel cut at an angle.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 32%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
Transaction
Created
1 year ago
Content Type
Language
application/zip
English
Controlling
MARIN
Mariner_QD_Grip_Module_(NT-79)
Mariner QD Grip Module (NT-79): Laffs Dynamics
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm+
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 32%+
Support Material Percentage: 18%
Print on it's rearmost facet.
Accreditations:
DaFizzlez: Lead designer of the AWCY NT-79 37mm Signaling Device / Flare Launcher, created the grip module for the design.
Transaction
Created
10 months ago
Content Type
Language
application/zip
English
GLOCK
Glock-Rear-Sight-Drift-Block
A block for drifting the rear sight via hammer and punch from a Glock slide. The rear sight can removed from either side of the slide, as the block has channels on either side to accommodate. Designed around the Glock 17 Gen 4 Slide; though should hold Glock 19, 26, and other slides with the same overall width and height dimensions as well.
Transaction
Created
1 year ago
Content Type
Language
application/zip
English
Controlling
HG-4
HG-4MP5K
HG-4 (MP5K): Laffs Dynamics
Concave handguard for the H&K MP5K & MKE AP5-M / AP5-P PDWs. Ridged, along with a frontal handstop to avoid muzzle popping your hand.
Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon
Print Settings:
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 75%+
Support Material Percentage: 20%
Print the mount on it's rear face.
Transaction
Created
7 months ago
Content Type
Language
application/zip
English
UBAR-
UBAR-9WC
UBAR-9WC: Laffs Dynamics
Variant of the RK Spookware UBAR-9, subvariant of the UBAR-9W. (Winterized)
Has a modeled in flared magwell for ease of magazine insertion, with recontoured ridges down the front section.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 8+
Infill: 50%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Notes:
This file pack is for the receiver only. Other printed part files will need to be downloaded from the base design release;
links provided in the below text.
Base UBAR-9 files can be found on DefCAD & Odysee:
DefCAD: https://defcad.com/library/b0bf3c45-de63-4f87-a1a2-d8d60a5a4406/
Odysee: https://odysee.com/@RKSpookware:2/UBAR9:0
(Other print settings and the hardware list will be provided in the base data pack)
UBAR-9W files can be found on DefCAD:
DefCAD: https://defcad.com/library/e5fcd0de-7554-4384-a48e-0ce67d424285/
Hardware for the UBAR-9 can be bought from: https://rkspookware.com/ubar-9-lower-receiver-hardware-kit/
Accreditations:
RK Spookware: Creator of the UBAR-9 Receiver; used the base receiver model from their design release. Provided hardware.
Provided images for reference.
Transaction
Created
1 year ago
Content Type
Language
application/zip
English
KEYMO
Keymod-CAD-Template
Keymod Accessory Mount CAD Template by Laffs Dynamics
STL and STEP files of an accessory mount template that attaches to Keymod rails. Otherwise known as Dick Mod.
These files are intended to aid in firearm accessory design. Whilst they can be 3D printed, they're meant to be used in
CAD software such as Fusion 360.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5
Infill: 25%
Material Flow: 100%
"Is that Keymod? Yes, that is a C H A D M O V E."
PSR, 2021
Transaction
Created
1 year ago
Content Type
Language
application/zip
English
Controlling
FB-1
FB1MP5
FB-1 (MP5): Laffs Dynamics
Blade style pistol brace for H&K MP5 submachine guns and pistol variants, as well as licensed copies such as MKE manufactured AP5 pistols
and Pakistan Ordnance POF-5 variants.
(May require slight hand fitment due to MP5 licensed manufacturers using older tooling for their model variants)
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 50%+
Support Material Percentage: 18%
Hardware Required:
1x Choate MP5 Stock Buffer
1x M5x15mm Bolt
2x M3x25mm - M3x30mm Bolts
Transaction
Created
3 weeks ago
Content Type
Language
application/zip
English
Controlling
3FTEC
Compact-Evo-Grip
3FTech Compact Evo Grip: FFFTech/FFFTechnology
A variant of the Balance Mini Grip, designed for the AWCY? Scz0rpion and OEM CZ Scorpion Evo 3.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 54C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Print the grip upside-down.
Hardware Required:
1x M4x30mm Bolt
1x M4 Hex Nut
Accreditation:
*justinhates: For the model request and instruction of specific design variations.
*Insertmeow: Original designer of the CZ Sczorpion MOE Grips, which this design uses the top portion of his grip model.
Transaction
Created
1 year ago
Content Type
Language
application/zip
English