This is a Regula Movement and a Albert Schwab Karlsruhe Cuckoo Clock. The man chopping wood while the cuckoo bird sings. We have dancers that dance while the water wheel spins. A few loose parts on the case that we had to glue in place and I wax the clock with Howard's Wax and Conditioner just to help make the clock look new again. Follow along to understand how the movement works while I take it apart, clean the parts and put the movement back together. You can contact me at email: justmike2575@gmail.com Here I do most of my work on clocks. Mainly cuckoo clocks, yet I am always looking for the unusual and eye catching clocks. Some of the clocks I get into are ones that need saved from the dump. They fell off the wall from not securing the clock to the wall using the stud behind the sheetrock. Some of the clocks were laid to rest out in the garage or barn and I except the challenge of getting them back together again. A well loved clock at one time is one that has a lot of wear and you find old bushings that might need to be replaced. ... https://www.youtube.com/watch?v=urHil4yPo1Q

Now that I am retired, I just might show my life and some of the towns around me. My Brother and Dad, live on the same Dead End Road and yea, maybe we just might get into trouble a little, but have fun doing it. It is time to start smelling the Roses on the way instead of looking at them and passing them by. Camera; Sony HDR-SR11 Camera #2; Sony HDR-CX440 Bluetooth mic; Sony ECM-HW1R Wireless Microphone Wide Angle lens; Digital Visions HD 37MM 0.45X Location; Washington State Music; http://freemusicarchive.org/music/Scott_Holmes/Music_for_TV__Film/Back_On_The_Road_Again_1828 Back On The Road Again by Scott Holmes ... https://www.youtube.com/watch?v=WWMAs1-kN7w

These clocks are made easy to change the Spring Wire for the pendulum if you know which wire to buy. That is why I bought the book for these Anniversary Clock I am working on. The Barrel Spring is the hard part when doing it by hand. This clock had a very small barrel and was difficult to get the spring back into the barrel. Because of the glass cover for this clock with the hole in the top so you can screw down the knob to hold the glass cover on, make this clock even more rare than your normal Anniversary Clocks. I polish the brass base and clean the movement, including the barrel spring. You can contact me at email: justmike2575@gmail.com Here I do most of my work on clocks. Mainly cuckoo clocks, yet I am always looking for the unusual and eye catching clocks. Some of the clocks I get into are ones that need saved from the dump. They fell off the wall from not securing the clock to the wall using the stud behind the sheetrock. Some of the clocks were laid to rest out in the garage or barn and I except the challenge of getting them back together again. A well loved clock at one time is one that has a lot of wear and you find old bushings that might need to be replaced. ... https://www.youtube.com/watch?v=ht_cTfuvr2I

You can contact me at email: justmike2575@gmail.com In part 2 I show taking the movement apart with pictures I took before taking it apart and you should do the same if you attempt to do the same. I lost the rest of the footage putting it back together, but I have other videos of the same thing and normally explain what some of the leavers do to help you with might be your problem with your clock. Now that I am retired, I just might show my life and some of the towns around me. I enjoy working on Cuckoo Clocks and clocks in general, How to repair vacuums, fans and things form the thrift stores, besides the thrift store finds, and working on houses. Time Lapse, Bird & Sky watching along with gardening. Helping my Dad with things he loved to do, along with taking dad and his wife to breakfast. My Brother and Dad, live on the same Dead End Road and yea, maybe we just might get into trouble a little, but have fun doing it. It is time to start smelling the Roses on the way instead of looking at them and passing them by. ... https://www.youtube.com/watch?v=J8oOHcYyFHE