At https://www.kiwico.com/cnc and code CNC, you'll get 50% off your first month of KiwiCo's monthly subscription!
Everyone uses a hot glue gun to explain 3D printing, yet nobody sells hot melt glue filament for a real 3D printer! I wanted to change that and make the first hot melt glue filament, for the giggles but also to 3D print iron-on patches! Let's find out more!
*Chapters* 00:00 Introduction 01:59 Mosaic's 3D Printed Iron On Patches 03:09 Shredding Glue Sticks 05:19 Extruding Hot Melt Glue Sticks - Attempt 1 07:50 Sponsor 09:38 Extruding Hot Melt Glue Sticks - Attempt 2 12:40 Printing Hot Melt Glue Filament 15:14 3D Printing Iron on Patches 18:08 Summary
#3Dprinting #HotMeltGlue #DIY DISCLAIMER: Part of this video was sponsored by KiwiCo. FTC Disclaimer: A percentage of sales is made through Affiliate links ... https://www.youtube.com/watch?v=alwsRqh5W8M
At https://www.kiwico.com/cnc and code CNC you'll get 50% off your first month of KiwiCo!
PET Bottles are everywhere, but did you know that you could recycle them into 3D printing filament and this at home! Let me show you how I used the parts of an old Ender-3 to build a filament maker out of it. I also tested the strength of this material, which can even be improved by a trick!
Check out our *CNC Kitchen products* at https://cnckitchen.store/ or at resellers https://www.cnckitchen.com/reseller and on AMAZON (EU) https://geni.us/s8rYtQ
Build your own Recreator3D: http://recreator3d.com/
Recreator Discord: https://discord.gg/jwPQqRsv6T
Facebook Group: https://www.facebook.com/groups/recreator3d
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
Join as a YouTube member!
Buy an Original Prusa i3 printer: https://geni.us/CNCKPrusa
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
JLCPCB 3D Prints starting at only $1: https://geni.us/JLC3DPrinting
?Check out my Podcast with Thomas Sanladerer: https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
? Further information:
Solar drain clip: https://www.printables.com/model/473323-solar-module-drain-clip-for-30mm-panels/files
Lumpy Bumpy Vase: https://www.printables.com/model/16170-lumpy-bumpy-vase
ecodecat: https://www.youtube.com/watch?v=jG-U3vSpUnM
The Ocean Cleanup: https://www.youtube.com/@theoceancleanup/featured
⚙ My gear:
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
30mm f2.8 macro - Great Macro Lens (80% of my videos): https://geni.us/vEwqD
10-25mm f1.7 - Awesome Lens: https://geni.us/ZTBH
12-35mm f2.6 - Great Allround Lens: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel Lens: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
Follow me on Twitter: https://twitter.com/cnc_kitchen
Follow me on Instagram: https://www.instagram.com/cnckitchenyt/
Chapters:
00:00 Introduction
00:35 PET Bottles
01:37 Pultrusion Machines
02:31 Printing the Parts
03:00 Disassembling the Ender 3
03:44 The Bottle Cutter
04:32 Modifying the Hotend
05:40 Building the Recreator
07:06 Sponsor
09:16 Preparing the Bottle
11:33 Starting the Pultrusion Process
13:55 Printing BottlePET
14:55 Strength Test
16:10 Summary
#3Dprinting #recycling #pultrusion
DISCLAIMER: Part of this video was sponsored by KiwiCo.
FTC Disclaimer: A percentage of sales is made through Affiliate links
...
https://www.youtube.com/watch?v=1yIe1Pp_Nrg
I show you how you can use my EXCEL calculation sheet to create quotes for customers. We take a look at which costs really need to be considered if you want to run a small 3D printing business.
Download my calculation sheet from GitHub: https://github.com/CNCKitchen/3D-Printing-costs
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
?Check out my PODCAST with Tom Sanladerer
https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
⚙ My gear (Affiliate Links):
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
10-25mm f1.4 - Awesome Lense: https://geni.us/ZTBH
30mm f2.8 macro - Great Macro Lense: https://geni.us/vEwqD
12-35mm f2.6 - Great allround lense: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel lense: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photoraphy: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
? Do you want to help me cover my running costs? Send me a dollar or two over PayPal, it helps me a lot!
https://www.paypal.me/CNCKitchen
? Even watching the ads before my videos helps me a lot!
Subscribe to the channel: https://www.youtube.com/c/cnckitchen
Follow me on Twitter: https://twitter.com/cnc_kitchen
...
https://www.youtube.com/watch?v=ffg9dArNfCg
Let's find out which type of glue is most suitable for gluing our 3D printed plane together! The contestants are: CA glue, 2 part epoxy, acetone and UHU.
Take a look a 3DLabPrints planes: https://3dlabprint.com/shop/
Buy a CR-10S on GEARBEST: https://goo.gl/GBjEJW
Buy the CR-10S on AMAZON: http://geni.us/rVBsR
Get 17.5% off your Formfutura filament purchase with "CNCK-FFT-175": https://www.formfutura.com/
Get the parts for your own Messerschmitt:
Loctite 435: http://geni.us/EpDAA1o
CA glue: https://hobbyking.com/en_us/hobbyking-super-glue-ca-50g-1-7oz-medium.html?affiliate_code=RZENWXRZJNBIWVR&_asc=1915313116
Activator: https://hobbyking.com/en_us/insta-set-ca-accelerator-2-oz.html?affiliate_code=RZENWXRZJNBIWVR&_asc=1116399697
ECO Motor: https://hobbyking.com/en_us/turnigy-d3530-14-1100kv-brushless-outrunner-motor.html?affiliate_code=RZENWXRZJNBIWVR&_asc=5533564146
ESC: https://hobbyking.com/en_us/hobby-king-30a-esc-3a-ubec.html?affiliate_code=RZENWXRZJNBIWVR&_asc=8060786061
LiPo: https://hobbyking.com/en_us/turnigy-2200mah-3s-20c-lipo-pack.html?affiliate_code=RZENWXRZJNBIWVR&_asc=455800458
Servos: https://hobbyking.com/en_us/hxt900-micro-servo-1-6kg-0-12sec-9g.html?affiliate_code=RZENWXRZJNBIWVR&_asc=2401845524
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
?Check out my PODCAST with Tom Sanladerer
https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
⚙ My gear (Affiliate Links):
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
10-25mm f1.4 - Awesome Lense: https://geni.us/ZTBH
30mm f2.8 macro - Great Macro Lense: https://geni.us/vEwqD
12-35mm f2.6 - Great allround lense: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel lense: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photoraphy: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
? Do you want to help me cover my running costs? Send me a dollar or two over PayPal, it helps me a lot!
https://www.paypal.me/CNCKitchen
? Even watching the ads before my videos helps me a lot!
Follow me on Twitter: https://twitter.com/cnc_kitchen
...
https://www.youtube.com/watch?v=JSff8OMRHtw
Start your free trial at http://squarespace.com/cnckitchen and use code CNCKITCHEN to get 10% off your first purchase.
Adding threads to 3D prints does not only improve the look of them but can also improve strength and usability. I've been working on a couple of comments and suggestions from the last videos on that topic. We'll be testing the strength of Böllhoffs Helicoils as well as embedded nut and compare that to the strength of heat-seated inserts. We'll also take a look at the strength assessment of these connections and see how they compare to our test results!
Website article: www.cnckitchen.com/blog/helicoils-threaded-insets-and-embedded-nuts-in-3d-prints-strength-amp-strength-assessment
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
Join as a YouTube member!
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
? Buy inserts and helicoils:
Helicoil Kit on AMAZON (aff): https://geni.us/coI5l
Generic Thread Repair Kit: (aff): https://geni.us/HfAgb
Ruthex inserts (EU only) (aff): https://geni.us/wzkg
Similar ones on Aliexpress (aff):
M3 - http://s.click.aliexpress.com/e/3YklOajW
M4 - http://s.click.aliexpress.com/e/EhSWjajQ
M5/M6 - http://s.click.aliexpress.com/e/npG5PrJS
?Check out my PODCAST with Tom Sanladerer
https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
? Related videos:
Comparing the strength of inserts of different price: https://youtu.be/G-UF4tv3Hvc
Threaded inserts in 3D prints: https://youtu.be/iR6OBlSzp7I
Strength of glued connections: https://youtu.be/JSff8OMRHtw
DIY Universal Test Machine: https://youtu.be/uvn-J8CbtzM
⚙ My gear (Affiliate Links):
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
30mm f2.8 macro - Great Macro Lens (80% of my videos): https://geni.us/vEwqD
10-25mm f1.7 - Awesome Lens: https://geni.us/ZTBH
12-35mm f2.6 - Great Allround Lens: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel Lens: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
Follow me on Twitter: https://twitter.com/cnc_kitchen
Follow me on Instagram: https://www.instagram.com/cnckitchenyt/
DISCLAIMER: This video was sponsored by Squarespace.
...
https://www.youtube.com/watch?v=2wRc1KbEAU8
Start your Squarespace free trial today at http://www.squarespace.com/cnckitchen and use code CNCKITCHEN to get 10% off your first purchase.
Check out the all new CNCKitchen.com (work in progress) !
Everyone, who is into 3D printing has already heard that you can anneal, temper or bake your 3D prints in order to increase strength. There is little data on this topic available, so I tested the influence of annealing on PLA in this video. There will be more videos coming with tests on materials like PETG, ABS or Nylon. I'll be investigating the myth if you can really bake your layers together when you heat treat your 3D prints. Watch and find out more!
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
?Check out my PODCAST with Tom Sanladerer
https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
?Tested Materials
Formfutura Premium PLA: https://www.formfutura.com/shop/category/pla-premium-pla-175
Formfutura Volcano PLA: https://www.formfutura.com/shop/category/pla-volcano-pla-189
Spoolworks PLA: https://e3d-online.com/spoolworks-pla
?Papers and further information
Effects of Annealing Time and Temperature on the
Crystallinity and Heat Resistance Behavior of
Injection-Molded Poly(lactic acid): https://www.academia.edu/download/51649023/pen.2330420170205-6494-19y7jvl.pdf
https://rigid.ink/blogs/news/how-to-anneal-your-3d-prints-for-strength
https://www.fabbaloo.com/blog/2019/5/1/strengthen-pla-prints-by-annealing
https://www.fargo3dprinting.com/annealing-makes-3d-prints-better/
https://www.justinmklam.com/posts/2017/06/sous-vide-pla/
⚙ My gear (Affiliate Links):
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
10-25mm f1.4 - Awesome Lense: https://geni.us/ZTBH
30mm f2.8 macro - Great Macro Lense: https://geni.us/vEwqD
12-35mm f2.6 - Great allround lense: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel lense: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photoraphy: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
? Do you want to help me cover my running costs? Send me a dollar or two over PayPal, it helps me a lot!
https://www.paypal.me/CNCKitchen
? Even watching the ads before my videos helps me a lot!
Follow me on Twitter: https
...
https://www.youtube.com/watch?v=dOzVuoBP9gY
Zellerfeld is looking for a Head of Production in the US. Help to put 3D-printed shoes on every foot in the world: https://geni.us/ZellerfeldHoP
Virtually all 3D printers have adjustment screws, knobs, or levers to change the pretension on the filament in the extruder. Though how do you properly set it for your application, how can you get the most out of your extrusion system, and why would you really lower the tension for flexibles? Let’s find out more!
Check out our CNC Kitchen products:
Our Store: https://cnckitchen.store/
Prusa Store: https://geni.us/CNCKitchenPrusa
Amazon DE (EU Shipping): https://amzn.to/3MrRUfi
Website article: https://www.cnckitchen.com/blog/how-to-set-extruder-tension
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
Join as a YouTube member!
CNC Kitchen Threaded Inserts: https://geni.us/CNCKInsertsChoice
Merch: https://teespring.com/stores/cnckitchen
Buy an Original Prusa i3 printer: https://geni.us/CNCKPrusa
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
Shop at E3D: https://geni.us/CNCK_E3D
?Check out The Meltzone Podcast: https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
? Equipment used in this video:
WhamBam Mutant: https://whambam3d.com/collections/mutant
OmniaDrop: https://www.dropeffect.com/store
E3D Hemera: https://geni.us/CNCK_E3DHemera
Bondtech LGX: https://www.bondtech.se/product/lgx-large-gears-extruder/
Pheatus Rapido: https://www.phaetus.com/rapido-hotend/
DUET: https://www.duet3d.com/
? Printed models:
3D Benchy by Daniel Norée: https://www.thingiverse.com/thing:763622
Mini Stefan: https://www.prusaprinters.org/prints/86888-mini-stefan-by-wekster
Automatic Flow Test: https://www.printables.com/model/160335-hotend-benchmark-test-g-codes
? Further Links & References:
Simple 200 mm extrusion G-Codes: https://www.printables.com/model/198053-simple-200-mm-extrusion-for-tension-setting
Calibrating Extruder Grip: http://thrinter.com/calibrating-extruder-grip/
⚙ My gear (Affiliate Links):
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
30mm f2.8 macro - Great Macro Lens (80% of my videos): https://geni.us/vEwqD
10-25mm f1.7 - Awesome Lens: https://geni.us/ZTBH
12-35mm f2.6 - Great Allround Lens: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel Lens: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https:
...
https://www.youtube.com/watch?v=5UEUFDP8M30
I'll show you how you can flash a bootloader and upload a custom version of Marlin on your CR-10. This is the first part of the 2 part series, in which we will upgrade the CR-10 with an E3D Titan Aero Direct extruder.
Buy a CR-10S on GEARBEST: https://goo.gl/GBjEJW
Buy the CR-10S on AMAZON: http://geni.us/rVBsR
Things you should have:
Original Arduino UNO: http://geni.us/EmL29a6 OR
Arduino UNO clone: http://geni.us/T1VwAj8
Jumper Wires: http://geni.us/kvEd8
Arduino IDE: https://www.arduino.cc/
Marlin 1.1.6 for Titan Aero: https://github.com/CNCKitchen/CR-10-modifications/blob/master/Marlin.zip
Sanguino URL: "https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json"
Written tutorial: http://www.instructables.com/id/Flashing-a-Bootloader-to-the-CR-10/
Quick Dial Knob: https://www.thingiverse.com/thing:2751178
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
?Check out my PODCAST with Tom Sanladerer
https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
⚙ My gear (Affiliate Links):
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
10-25mm f1.4 - Awesome Lense: https://geni.us/ZTBH
30mm f2.8 macro - Great Macro Lense: https://geni.us/vEwqD
12-35mm f2.6 - Great allround lense: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel lense: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photoraphy: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
? Do you want to help me cover my running costs? Send me a dollar or two over PayPal, it helps me a lot!
https://www.paypal.me/CNCKitchen
? Even watching the ads before my videos helps me a lot!
Follow me on Twitter: https://twitter.com/cnc_kitchen
...
https://www.youtube.com/watch?v=5B_NnCcXLtc
A CT scan is not only useful in medicine but can also be an impressive tool for engineering. We used it in this instance to take a look at the inside of a Conically Sliced 3D print to reveal printing problems!
Check out our *CNC Kitchen products* at https://cnckitchen.store/ or at resellers https://www.cnckitchen.com/reseller and on AMAZON (EU) https://geni.us/s8rYtQ
Thanks to Hachtel for the CT Scan: https://www.fg-hachtel.com/
Conically Sliced Christmas Tree: https://www.printables.com/model/314844-supportless-christmas-tree-conical-slicing
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
Join as a YouTube member!
Merch: https://teespring.com/stores/cnckitchen
Buy an Original Prusa i3 printer: https://geni.us/CNCKPrusa
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
Shop at E3D: https://geni.us/CNCK_E3D
?Check out my Podcast with Thomas Sanladerer: https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
⚙ My gear:
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
30mm f2.8 macro - Great Macro Lens (80% of my videos): https://geni.us/vEwqD
10-25mm f1.7 - Awesome Lens: https://geni.us/ZTBH
12-35mm f2.6 - Great Allround Lens: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel Lens: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
Follow me on Twitter: https://twitter.com/cnc_kitchen
Follow me on Instagram: https://www.instagram.com/cnckitchenyt/
#3Dprinting #shorts #technology
FTC Disclaimer: A percentage of sales is made through Affiliate links
...
https://www.youtube.com/watch?v=BlMv7DIES70
I show you how I installed an E3D 0.6mm nozzle on my Creality CR-10 and optimized the print settings for efficient printing.
? Support me ?
Patreon: https://www.patreon.com/cnckitchen
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
?Check out my PODCAST with Tom Sanladerer
https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
⚙ My gear (Affiliate Links):
? CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
10-25mm f1.4 - Awesome Lense: https://geni.us/ZTBH
30mm f2.8 macro - Great Macro Lense: https://geni.us/vEwqD
12-35mm f2.6 - Great allround lense: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel lense: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photoraphy: https://geni.us/mqWM
?AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
? LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
? Want to buy a Creality CR-10 and support the channel: https://www.gearbest.com/3d-printers-3d-printer-kits/pp_627176.html?lkid=11498115
? Buy premium nozzles from E3D: https://e3d-online.com/nozzles-for-3d-printer
Download the part cooling nozzle on Thingiverse: https://www.thingiverse.com/thing:2562314
? Do you want to help me cover my running costs? Send me a dollar or two over PayPal, it helps me a lot!
https://www.paypal.me/CNCKitchen
? Even watching the ads before my videos helps me a lot!
Subscribe to the channel: https://www.youtube.com/c/cnckitchen
Follow me on Twitter: https://twitter.com/cnc_kitchen
...
https://www.youtube.com/watch?v=ChaqTSzrYjI