The Strike Industries Shift Pins bring yet another innovative solution to the AR-10 market. Already keeping the extended grip surface for easy disassembly without a need for a pin punch, the pins are also designed with Quick Detach mechanisms that result in not needing to remove extra parts such as an endplate, castle nut, and buffer tube. Simply rotate, and remove the pins as shown. The nearly tool-less design combined with our enhanced detent pins that retain inside the pin springs makes swapping out the pins an almost effortless task. No more launching those darn detents into the abyss!
The SI Shift Pin is CNC machined from solid steel for strength, precision fit, and corrosion resistance. This is a replacement for most AR-10 takedown/pivot pins and fits most of AR standard and billet receivers.
WARNING AND DISCLAIMER NOTICE: Strike Industries shall not be responsible for injury, death or damage to property resulting from misuse, illegal use or modification of this product. Observe safe firearm handling practices at all times. Before beginning installation, make sure the weapon is unloaded and the safety is engaged. Failure to do so may result in grievous bodily injury or death. Product installation should be conducted by a professional gunsmith. Please refer to the Strike Industries product page at www.strikeindustries.com for complete specifications and installation guides, or call our customer support line at 1-714-557-9831 for further assistance. ... https://www.youtube.com/watch?v=g38HhsM1JcM
Learn more:
https://bit.ly/SIARCARail
The Strike M-LOK ARCA Rail Adapter enables easy mounting on ARCA Swiss mounts. Angled front corners to reduce snagging during ARCA mount insertion. Securely and conveniently adapter M-LOK to ARCA Swiss. Threaded holes along adapter rail for SI ARCA accessories. Machined from 6061-T6 aluminum, ARCA Swiss mounts have become the industry standard. With the Strike M-LOK ARCA Rail Adapter, you get a low-profile lightweight option to adapt most M-LOK surfaces.
Find out more:
https://bit.ly/SIGRIDLOKLITE
The Strike Industries GRIDLOK® LITE Rail for AR-15 takes innovation from GRIDLOK® but this is a 1-piece design to minimize weight and offer a cost-effective option. Using the same Patent Pending Quick Rail Detach system, there is no other handguard that can be removed at home or in the field on the market today. With the Quick Rail detach system, a simple push and pull of the of the quick detach (QD) latch, you have the handguard off in seconds to make any adjustments to an adjustable gas block or installation/removal of a suppressor. The QD latch has also been redesigned with a new locking button for earlier latch locking. Integrated into the front of the GRIDLOK® LITE is the built-in flip up backup iron sight (BUIS). Just about any M-LOK accessories can be attached and mounted along the length of the rail at 1, 3, 5, 6, 7, 9 and 11 o'clock positions giving you as many options as any handguard on the market. In the rear of the handguard you will find a integrated 360° free swivel QD socket for a 2-point setup. Rear tabs with set screws at the top the SI GRIDLOK® LITE help center the top rail to the upper receiver to ensure proper alignment. The cut in front was designed to help fit suppressors up to 1.57" (39.9mm) in diameter and of course all SI muzzle devises including the SI OPPRESSOR for those looking for that tucked look. The handguard is machined from 6061-T6 aluminum and the barrel nut is machined from 7000 series aluminum which excels in applications that require lightweight and high strength. The Strike Industries GRIDLOK® LITE for AR-15 brings you features and improvements from big brother GRIDLOK® but with a more lightweight and cost-effective option.
COMPATIBILITY:
Mil-Spec M4 upper receiver
NOT COMPATIBLE:
-Piston gas block
-Some billet/side charging uppers
-11", 15", 17" with A2 Front Sight Post gas block
NOTE: The two locking screw at base can only be easily adjusted when the base is not mounted on barrel nut. It is NOT RECOMMENDED to adjust the locking tightness when you mount it on barrel nut. Installation video available.
Product Contents:
-x1 GRIDLOK® LITE rail
-x1 Barrel nut
-x1 Barrel nut wrench
-x1 Locking lever tool
-x1 Hex tool (1.5mm)
-x1 Loctite® Threadlocker Blue 242®
Product Features:
-1-pc free float handguard design to minimize weight and a cost-effective option
-Same Patent Pending Quick Rail Detach system as GRIDLOK® with redesigned lockng button for easier QD latch locking
-Built-in flip up front BackUp Iron Sight (BUIS)
-M-LOK rail system at 1,3,5,6,7,9 and 11 o’clock positions for accessory mounting options
-Integrated 360° free swivel QD socket at rear of handguard
-Rear tabs with set screws help center top rail to upper receiver
-Designed cut in front fits suppressors up to 1.57" (39.9mm) in diameter and all SI muzzle devices, including SI OPPRESSOR
-Handguard machined from 6061-T6 aluminum
-Barrel nut machined from 7000 series aluminum which excels in applications requiring lightweight and high strength
COMPATIBILITY:
Mil-Spec M4 upper receiver
NOT COMPATIBLE:
-Piston gas block
-Some billet/side charging uppers
-11", 15", 17" with A2 Front Sight Post gas block
...
https://www.youtube.com/watch?v=QZt1e5smv4k
Learn more:
https://bit.ly/SIGSURFV2
Say hello to next iteration of the Strike Industries Scorpion Universal Reflex Mount for GLOCK™ with Version 2 featuring the latest SI Multi-Optic Mount design. This mount easily fits most Mini/Micro Red Dot Sights (MRDS) available in the market without requiring any permanent milling or custom work on your GLOCK™ pistol slide and includes an optional to use ambidextrous charging handle. This includes C-More, DeltaPoint Pro, Docter/Noblex, RMR Standard, Shield Standard and all SIG SAUER Open Reflex SIghts. With a low-profile design, the mount offers a sleek and streamlined appearance without compromising on functionality. The included mounting posts and screws offer versatility, accommodating a variety of red dot sights. For added convenience, the optional charging handle can be easily configured on either side to cater to individual user preferences. Machined from 6061-T6 Aluminum, this durable and high-quality mount is built to last. Upgrade your GLOCK™ with the Strike Industries Scorpion Universal Reflex Mount for GLOCK™ Version 2.
...
https://www.youtube.com/watch?v=lEVeelaRHRg
Get your Strike Industries Liteslide for GLOCK™ G17 GEN3
https://bit.ly/SIGLITESLIDE
The Strike Industries Liteslide for GLOCK™ G17 GEN3 was created with optimal accuracy and performance in mind, perfect for any upgrade or a new custom build. Made in the USA from machined billet 17-4 Stainless Steel using clockwork precision to ensure increased consistency in barrel lockup that results in levels of match-grade accuracy. The SI Liteslide weighs significantly less than the factory production model, reducing the recoil momentum which allows faster and more efficient follow-up placement. The SI Lightslide was proudly designed with durability and function in mind along with the Strike Industries stylings. Large enhanced aggressive front and rear serration areas aid in manipulating the slide to check the chamber or clear a jam. Combined with our Universal Optics Mount cut, you are able to mount most of your favorite optics securely with ease without needing to send your slide out to get machined. Additionally, a removable cover plate is included for your customization preferences. The SI Liteslide comes with all necessary screws and posts needed for most optics. The Strike Industries Lightslide for GLOCK™ G17 GEN3 is truly an aesthetic and performance upgrade or a great choice for a custom build.
-Large aggressive front and rear serration areas
-Pre-cut multiple optic sight mount w/ screws and posts included
-Cover plate and screws included
-Lightweight design
-Uses standard front & rear GLOCK™ compatible sights
-Machined billet 17-4 Stainless Steel
-Heat treated to H900, 40-42 HRC
-Made in the USA
Red dot mount compatibility list :
Trijicon RMR
Doctor sight
MRDS/Burris/Vortex Viper
Leopold Delta point pro
Vortex Venom
Sightmark SM2643
Holosun HS407CO-V2
and more...
...
https://www.youtube.com/watch?v=eyXCM8vs2eM
Learn More
https://bit.ly/SIARCMCOVER
The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time.
Package Contents:Package Contents:
-x2 M-LOK Cable Management Covers (Long) or x4 M-LOK Cable Management Covers (Short)
-x4 Screw
-x4 Nut
-x1 Torx tool [T20]
-x1 Loctite® Threadlocker Blue 243®
Product Features:
-Built-in Cable Management System® w/ excess wire storage (patent pending)
-Cables can be routed: alongside, across, 90-degrees or U-shape
-Positive tactile feeling
-Minimizes heat transfer
-Increased comfort
-Protection against sharp rail slot edges
-Made from durable and lightweight polymer
COMPATIBILITY: M-LOK
NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.
Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws
-CALIFORNIA PROPOSITION 65 WARNING:-
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
-x2 M-LOK Cable Management Covers (Long) or x4 M-LOK Cable Management Covers (Short)
-x4 Screw
-x4 Nut
-x1 Torx tool [T20]
-x1 Loctite® Threadlocker Blue 243®
Product Features:
-Built-in Cable Management System® w/ excess wire storage (patent pending)
-Cables can be routed: alongside, across, 90-degrees or U-shape
-Positive tactile feeling
-Minimizes heat transfer
-Increased comfort
-Protection against sharp rail slot edges
-Made from durable and lightweight polymer
COMPATIBILITY: M-LOK
NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.
Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws
-CALIFORNIA PROPOSITION 65 WARNING:-
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
...
https://www.youtube.com/watch?v=V2Na7M-Uwsw
Get your Strike industries LITESLIDE FOR GLOCK™ G19 GEN3 below!
LITESLIDE
http://bit.ly/SIGLITESLIDE
SLIDEKIT COMPLETION KIT
http://bit.ly/GSLIDEKIT
The Strike Industries LITESLIDE for GLOCK™ G19 GEN3 was created with optimal accuracy and performance in mind, perfect for any upgrade or new custom build. Made in the USA from machined billet 17-4 Stainless Steel using clockwork precision to ensure increased consistency in barrel lockup that results in levels of match-grade accuracy. The SI LITESLIDE weighs significantly less than the factory production model, reducing the recoil momentum which allows faster and more efficient follow-up placement. The SI LITESLIDE was proudly designed with durability and function in mind along with the Strike Industries stylings. Large enhanced aggressive front and rear serration areas aid in manipulating the slide to check the chamber or clear a jam. Combined with the SI Universal Optics Mount cut, you are able to mount most of your favorite optics securely with ease without needing to send your slide out to get machined. Additionally, a removable cover plate is included for your customization preferences. The SI Liteslide comes with all necessary screws and posts needed for most optics. The Strike Industries LITESLIDE for GLOCK™ G19 GEN3 is truly an performance and aesthetic upgrade or a great choice for a new custom build.
NOTE: Channel liner is needed to complete slide
RED DOT COMPATIBILITY: Trijicon RMR, Burris FastFire, Doctor Red Dot Sight, EOTech MRDS, Holosun 407/507/508/509, Leopold DeltaPoint, SIG SAUER ROMEO 01, Sightmark Mini Shot M-Spec FMS, Vortex Viper/Venom
NOT COMPATIBLE: Leupold DeltaPoint Pro, SIG SAUER ROMEO1PRO/03
...
https://www.youtube.com/watch?v=-kXZF-peOHM
The Strike Industries Flat Top Overmolded Pistol Grip (15-Degree) is a rubberized texture pistol grip for aftermarket Ruger® 10/22 stock/chassis, modern precision rifle chassis systems, AR’s and any weapon that does not use or want a beavertail grip. The specific dimensional design is made to be comfortable and compatible for a Ruger® 10/22 aftermarket stock/chassis platform, but will fit any modern bolt-action rifle chassis that can only use a flat top AR compatible pistol grip. Also for any AR-15 or AR-10 shooter who desires the most compact setup as possible with the 15-degree grip angle for a confined space operation or PDW setup. Similar to the SI AR Overmolded Pistol Grip, this flat top has the same surface which improves control of your weapon. The grip is more streamlined and tapered where the webbing of the hand goes to allow more range of movement of the firing hand when accessing the controls. It has enough width in the palm area to maximize comfort during extended use when used with chassis system like a 10/22 or bolt rifle. This grip includes all the installation hardware needed for a new build or to completely replace an existing pistol grip and features a secure storage underneath with an included rubber grip plug. Enhance your AR, Ruger® 10/22 or precision rifle chassis with this Strike Industries Flat Top Overmolded Pistol Grip (15-Degree) designed to give you improved comfort and control.
COMPATIBILITY:
-Dimensional designed for aftermarket Ruger® 10/22 stock/chassis
-Modern precision bolt-action chassis using AR style pistol grip
-AR-15 and AR-10 lower receivers
-Optional Strike Pistol Grip Plug Tool Holder
NOTE: More twang feeling on AR system with lack of beavertail cushion
Package Contents:
-x1 Flat Top Overmolded Pistol Grip (15 Degrees)
-x1 Pistol grip screw
-x1 Crush washer
-x1 Pistol grip plug
Product Features:
-Flat top AR pistol grip for aftermarket Ruger® 10/22 stock/chassis, modern rifle chassis and AR-15/AR-10
-Rubberized overmolded grip improves comfort and control
-15-degree grip angle suited for confined spaces, PDW setups and modern shooting positions
-Secure storage underneath with an included rubber grip plug
-Streamlined profile and non-slip grip
...
https://www.youtube.com/watch?v=A46pTlWuvpk