The MAC 45, as the name would indicate, is a printable .45acp MAC 10 project. The MAC 45 differentiates itself in a few ways. Two lowers are inlcuded, one for the ever-popular Glock magazines, but more interestingly this project also hosts a lower for M3 Grease Gun magazines. Due to these substantially different approach angles, this project also features printable feed ramps! As well, instead of needing to use traditional MAC hardware, this project operates off of the AR-15 FCG, safety and pistol grip.
L-X22 (10/22) Receivers: FFFTech/FFFTechnology
A series of receivers, compatible with OEM and most aftermarket 10/22 parts.
Models:
*Model I: Designed with a recessed channel down it's center to allow the use of iron sights.
*Model O: Designed to be used with optics. A 1913 Picatinny rail is attached to the receiver top.
Both models have a reinforced variant, denoted with an R. (Ex. Model I-R) These models have channels in the sides of the receiver
that allow for the use of 12-24 threaded nuts to be pressed into the path of driven V Block bolts. The use of metal nuts allows for
retightening of the V Block bolts repetitively, and allow the proper use of blue loctite.
Users of other 3DP 10/22 variants have noted that when they would have to retighten the bolts, after a number of times the plastic
threads in the receiver sheared; permanently damaging the receiver, and the user wouldn't be able to retighten the block and barrel.
Got an old Sten mag kicking around you wish you could use for something, well fire up your printer and make yourself a Sten mag fed AR9. Maybe you purchased a PPS43 kit that came with mags but figured out far too late that you cant weld. well you can now put those mags to good use in a custom PPS43 mag fed AR9. Or just maybe you long for a MP5 but cant afford to even look at the kits, let alone buy one, don't worry, cause now you can LARP around your living room with a bootleg mp5 mag fed AR9. Vityaz, Evo, M3 Grease gun, colt, the options are endless. (options subject to ending.)