Prevent Tangled Filament - Filament Spool Holder - Anti Tangle Spool Holder - Tangled Filament Spool
I designed my own filament spool holder. When i'm using a new spool of filament,
it always tangled outside the roll. Because of the bow shape the filament follows,
there's a big chance that the filament falls off the roll and gets entangled.
I use 60% infill to create a strong spool holder. The first test prints was printed with an infill of only 20%.
It's much weaker and can break easily. It was bending a little too much when i carried a full spool on the holder.
IMPORTANT: Suitable for spools with an outer diameter of ø200mm.
The inside diameter must be ø54mm and the width of a roll can have a maximum size of 78mm.
? Download (buy) this model here:
https://cults3d.com/en/3d-model/gadget/spool-holder-anti-tangle? Download my free models here:
https://www.myminifactory.com/users/3DParts4UMy Simplify3D print settings:
- PLA
- 3600mm/minute (60mm/second)
- hotend 185°C | bed 55°C
- 250 micron | infill 60%
- 3 top layers | 3 bottom layers | 3 outline layers
- brass nozzle 0.35mm
- extrusion width 0.44mm
- retraction 1.00mm
- extrusion multiplier 0.95
- coasting 0.30mm
- wipe distance off
- fan 100%
- no support needed
This FELIX Pro 2 is recorded with permission from the marketing department of FELIXprinters.
http://www.felixprinters.com? Thanks for watching the video Prevent Tangled Filament - Filament Spool Holder - Anti Tangle Spool Holder - Tangled Filament Spool
#AllVisuals4U #Filament #Tangle #3DPrinting #Holder
Music from
https://filmmusic.io"Funkorama" by Kevin MacLeod (
https://incompetech.com)
License: CC BY (
http://creativecommons.org/licenses/by/4.0/)
(0:00-3:18)
Music from
https://filmmusic.io"Happy Alley" by Kevin MacLeod (
https://incompetech.com)
License: CC BY (
http://creativecommons.org/licenses/by/4.0/)
(3:18-4:22)