How to add a host in Citrix PVS Console ( step by step process ) | Citrix Provisioning services |
In this video, I showed how we can add host to Citrix PVS environment using PVS Console. When you use vDisk Update Management, a designated hypervisor server is selected from within a virtual pool that is then used to communicate with Citrix Provisioning. We can Create the designated hypervisor by running the Virtual Host Connection Wizard.
In the lab environment, the Xenserver has been assigned a new IP from DHCP server this morning, which broke the hosting connection because the Citrix components were still configured to work with the old IP of the Xenserver, I did some troubleshooting by change the hosting connection, and started few services, it took a while but in the end we could launch applications, and everything looked good. It' a long video, appreciate you all for watching.
Thanks!
...
https://www.youtube.com/watch?v=OK6WnjD73YA
In this Video, I troubleshooted the VDA machine unregistered issue in the test environment. There was some routing issue in the beginning, but later the controller was still not able to communicate with VDA machine even after fixing routing issues, managed to make the machine Registered in the end, and we could launch it successfully.
Thanks.
...
https://www.youtube.com/watch?v=R0vuo53mYlA
Can't connect to this network (( 30 proven Solutions to fix on Windows 7, 8, 10))[2018]
Can’t connect to this Network
Solution 1: Remove the Networks under the Manage Wireless Networks or Manage Known Networks and try to connect again. This occurs after changing wifi password on the router.
Can’t connect to this Network
Solution 2: Disable the wireless Network Adaptor in Device Manager, Restart the computer and enable it again. Try to connect to Wifi again.
Can’t connect to this Network
Solution 3: Disabling and enabling wireless Network connection. Try to connect to wifi Network again.
Can’t connect to this Network
Solution 4: Uninstalling the wireless drivers from Device Manager and Restart the computer. After restart, computer will automatically install drivers. Try to connect to wifi now.
Can’t connect to this Network
Solution 5: Do a network Reset if you are on windows 10 computer.
Can’t connect to this Network
Solution 6: uncheck ipv6 from Wireless Network Adaptor properties and try to connect to wifi again.
Disabling IPv6 on Network Adapter Windows 10
Can’t connect to this Network
Solution 7: Please go to command prompt and run the commands below.
netsh winsock reset catalog
netsh int ip reset c:\resetlog.txt
Solution 8: Change the DNS server settings in wireless network adaptor and test the wifi connection
Solution 9: Updating the Wireless Network drivers software in Device Manager. Go to device Manager, expand Network adaptors, right click your wireless network adaptor listed and click update drivers. After driver update restart and test wifi connection.
Solution 10: If you are on windows 8 or windows 10 computer, please turn on Airplane mode and wait for 20 seconds, turn off Airplane mode and try connecting to wifi network again and see if it works.
Solution 11: Reboot the wireless router and your laptop though you know other devices in the network are connected to the internet. It could help to resolve the problem.
Solution 12: Releasing and renewing the ip address
Simply go to elevated command prompt (go to start, type cmd.exe, then right and select 'Run as administrator')Type in the first command and press enter:ipconfig /releaseThen type in the second command and press enter:ipconfig /renew
Solution 13: Changing the wireless channel and channel Bandwidth on the router. For this you have to login to Router setup page. Try to connect to wifi network now and see if it works
Solution 14: Turn off software firewall on computer temporarily to see if it helps to resolve the issue.
Example: Norton, Avast, AVG etc
You may refer this video for solution on windows 10 computer.
https://www.youtube.com/watch?v=Fok76qo44og
chinese, spanish, hindi, Arabic, Portugese, Bengali, Russian, Japanese, Javanese, German, Korean, Fren
...
https://www.youtube.com/watch?v=rWLp-Kcc9vA
In this video I tried troubleshooting the issue while connecting to Citrix studio console, it was throwing You do not have sufficient permissions to administer the site error, One of the services is not responding as expected even though it was in started state, it worked after restarting the service.
Thanks!
...
https://www.youtube.com/watch?v=CahbiUU7JA4
In this video, I showed how to update Vdisk in the PVS environment, Right Click Vdisk and create new to create a new version, and we need to login to Mater Target device first and make necessary changes to the Vdisk, in this maintenance activity I have uninstalled Skype application, and later I booted to the new vdisk from a target device, we could login to new vdisk successfully and it's working as expected for the end user.
Thanks!
...
https://www.youtube.com/watch?v=Aq2Y096dknM
In this video I tried to troubleshoot to fix the problem of launching a VDI application in Citrix environment. Checked a few important things to solve the problem.
...
https://www.youtube.com/watch?v=QKsN4HjVm0A
In this video, I showed how to create a new store on the storefront server, and also discussed about the features that come with it.
Thanks!
...
https://www.youtube.com/watch?v=XUvIlcIZidE
Here is a quick video on how to connect to Citrix portal if you are working in TCS.. hope it helps. Please make sure you install Citrix workspace or receiver plugin software on computer or your device before connecting to the virtual apps.
...
https://www.youtube.com/watch?v=pXZpAh4wmC4
In this video I see an error message while logging into storefront URL . Checked few things to troubleshoot and fix the problem. We no more see the error message and could launch applications successfully in the end.
...
https://www.youtube.com/watch?v=nEGo0TDv7dQ