This project is not being performed at the college, but at home with my boys, Jordan and Jacob. We bought this 1966 Mustang last summer as a father-son project. We don't have the time or money to do a full restoration. Therefore, our plan is not to build a show car, but a nice looking car that you can drive on a daily basis. We will have to repair as much as possible, because we have a low budget for the project.
We decided to do this low budget project and video some of the steps as a guide for other parents that may want to do a parent-child project. Again, it you're looking to do a full restoration (show car quality) these may not be the steps to follow. You're probably going to completely disassemble the car and rebuild piece-by-piece.
Check back as we get this Mustang back on the roads.
http://CollisionBlast.com - ABRN and Butler Community College has teamed together to bring you this ABRN HOW2. In this video you are going to learn how to use the new Magna-Spot JO 1050 Stud Welder Gun. The new gun is made by Motor Guard and has new features, which help hold the studs in place. We found the new features to be very helpful and eliminates the problem of pins falling out of the tip. Visit http://bit.ly to learn the 7 step process for repairing dents and where to buy this stud welder.
Other than that, the gun operates the same:
1. Remove coating (grinder or dual action sander) sanding takes longer, but it much safer with today's thin metals.
2. Using stud welder gun weld several pins on the damaged area. (remember first in last out)
3. As you start pulling your indirect damage first, use a body hammer to tap down on the highs. (this also helps relax your metal)
4. Pull direct damage last.
5. Remove pins and grind any of the remaining stud welded to the panel. (do not over heat metal)
6. Grind or sand 4" past damage area to provide a area to apply filler without overlapping paint with filler.
7. Blow repair area off with compressed area.
Now you are ready to apply your body filler, block, prime, block, and get ready for paint.
That's it for this ABRN HOW2. Thanks for watching!
If you found this tutorial useful let us know by rating or leaving us a comment.
http://CollisionBlast.com - Mustang Restoration: In this video episode, we cut rust out so we can fabricate another part for the 1966 Mustang build. Rust is like working on a old house, it just keeps on going. I think we're to the last of the rust on this quarter panel section, and we can start putting it back together.
We're going to paint a car from start to finish in 3 minutes. It actually took us weeks, but I have sped the entire process to 3 minutes. The Mustang was green and we painted inside and out black. Looks like a simple process in this video, but the job took a lot of time and effort. As you will see in the video, it looks really good. You can see the entire video series at http://CollisionBlast.com/Eastwood FREE access to training at http://CollisionBlast.com Share this video https://youtu.be/LHS9lTU7ZHw
Also be sure to subscribe to this #DIYAutoBodyandPaint to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
PLAYLISTS
Q&A Video Response - https://www.youtube.com/playlist?list=PLFE0C4096959A85C4
Donnie and Jess - https://youtu.be/RO0_SKodbUk?list=PL49vEsY2VV2r7jFcKxDpgE7mpFqFJvfVl
Eastwood Video Series - https://youtu.be/uPgIOHkr0oE?list=PL49vEsY2VV2owacnGOt31FQj6N3e9_ugi
Plastic Repair - https://youtu.be/XrJ7t6KwdNs?list=PL49vEsY2VV2rhmWljJFSJSoUasg7-XzVF
Rust Patch - https://youtu.be/LwTBmRMRkbg?list=PLFE05DAE7CF6FD4CB
Spraying Matte Colors - https://youtu.be/Xc6f1tTam0w?list=PL2E1A50BE4361BB95
Spray Gun Adjustment - https://youtu.be/AY8_2qx4htw?list=PL9D278D201EBFA3B6
Masking Tips - https://www.youtube.com/playlist?list=PL49vEsY2VV2oBmZP4zaJ6D2paLe0VjJoJ
Basic Car Maintenance - https://www.youtube.com/watch?v=TEk7ci92DFY&list=PL9E857813A2D4EC64
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
If something is worth doing, then do your best and have a BLAST doing it.
DIY Auto Body and Paint -
The information provided in this video is for educational and informational purposes only and solely as a self-help tool for your own use. It is the responsibility of the viewer to First read the Technical Data Sheet, Material Safety Data Sheet, and any other instructions for each product, tool, or equipment used and to follow the safety recommendations of the manufacture. DIY Auto Body and Paint assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. There are no warranties or guarantees of the results of the viewer after watching this video. The results will vary according to each individuals talents, knowledge, and skills.
pssst...subscribe to my channel if you're a car enthusiast or want to learn how to repair cars yourself from home. I am a Master ASE certified collision repair instructor with a new video every Tuesday for you to watch. By watching my videos, you will learn how to: metal work, plastic repair, prep, block sand, prime, mask, paint, clear, and much more.
Click the subscribe button now before you forget and miss out on upcoming videos.
By subscribing to this channel you will be the first to know when I post a new video. Click the subscribe button or the link http://www.youtube.com/subscription_center?add_user=butlercollision
http://CollisionBlast.com/PaintQuiz - This is a auto body and paint quiz from questions asked by you. Take the quiz and see if you have the same answer
FREE access to training at http://CollisionBlast.com - In this video tutorial, we are going to demonstrate how to mix primer surfacer and apply it to the acura fender.
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
A seatbelt pretensioner is designed deploy during and auto accident and pull the passenger tighter into their seat. to FREE access to training at http://CollisionBlast.com Share this video
Also be sure to subscribe to this #DIYAutoBodyandPaint to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
___
Basic Auto Body and Paint
Dent Repair
http://www.collisionblast.com/dent-repair/
Body Fillers
http://www.collisionblast.com/body-fillers/
Welding
http://www.collisionblast.com/welding/
Plastic Repair
http://www.collisionblast.com/2013/04/02/plastic-repair/
Paint Prep
http://www.collisionblast.com/paint-prep/
Spray Gun Adjustment
http://www.collisionblast.com/2012/11/17/spraying-painting-tips-how-to-adjust-a-spray-gun-to-produce-professional-paint-job/
Paints and Clears
http://www.collisionblast.com/paints-and-clears/
Detailing
http://www.collisionblast.com/car-detailing/
Paint Defects
http://www.collisionblast.com/paint-defects/
----------------------------------------------------------------------
PLAYLISTS
___
Q&A Video Response - https://www.youtube.com/playlist?list=PLFE0C4096959A85C4
Donnie and Jess - https://youtu.be/RO0_SKodbUk?list=PL49vEsY2VV2r7jFcKxDpgE7mpFqFJvfVl
Eastwood Video Series - https://youtu.be/uPgIOHkr0oE?list=PL49vEsY2VV2owacnGOt31FQj6N3e9_ugi
Plastic Repair - https://youtu.be/XrJ7t6KwdNs?list=PL49vEsY2VV2rhmWljJFSJSoUasg7-XzVF
Rust Patch - https://youtu.be/LwTBmRMRkbg?list=PLFE05DAE7CF6FD4CB
Spraying Matte Colors - https://youtu.be/Xc6f1tTam0w?list=PL2E1A50BE4361BB95
Spray Gun Adjustment - https://youtu.be/AY8_2qx4htw?list=PL9D278D201EBFA3B6
Masking Tips - https://www.youtube.com/playlist?list=PL49vEsY2VV2oBmZP4zaJ6D2paLe0VjJoJ
Basic Car Maintenance - https://www.youtube.com/watch?v=TEk7ci92DFY&list=PL9E857813A2D4EC64
_
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
_
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
_
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
If something is worth doing, then do your best and have a BLAST doing it.
_
DIY Auto Body and Paint -
The information provided in this video is for educational and informational purposes only and solely as a self-help tool for your own use. It is the responsibility of the viewer to First read the Technical Data Sheet, Material Safety Data Sheet, and any other instructions for each product, tool, or equipment used and to follow the safety recommendations of the manufacture. DIY Auto Body and Paint assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. There are no warranties or guarantees of the results of the viewer after watching this video. The results will vary according to each individuals talents, knowledge, and skills.
http://bit.ly/autowelding - click link for more auto welding tips students demonstrate how to replace a shielding gas cylinder and wire on a MIG Welding Machine