Is This New Budget 4K Resin 3D Printer Worth Your Money? Elegoo Mars 3 Ultra 4k $300
Here is a look at the new Elegoo Mars 3 Ultra 4k, a budget 4K printer for only $300 but is it any good and should you get one? Check out the video & see if this is right for you.
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date:
This video will show how to make a set of his and her hammered rings.
Here is a link to all of the tools that I used in this video https://amzn.to/2WCkCRN
*If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*
Thank you for watching my videos and I hope I was able to help your learn a little more about making jewelry
Do you have a question or maybe just want to say "Hello"? Well just leave a comment, I will try to get back to you asap.
I want to see your work, if you want to share it with me and be in one of my videos then feel free to send it to gomeowcreations@gmail.com I would like to put your work at the end of my videos and give you a little shout out.
----------------------------------------------------------------------------------------------------------
If you would like to send any materials, tool or anything really free to send them to my PO box and I will make sure to give you a shout out and use them in a future video.
Gomeow Creations
Randy May
24930 Washington AVE
#1008
Murrieta CA 92564
----------------------------------------------------------------------------------------------------------
#jewelrytutorial #DIY #beginnerjewelrymaking
Help support the channel on Patreon -
https://www.patreon.com/GomeowCreations
Gomeow Creations website - http://gomeowcreations.com/
Instagram - https://www.instagram.com/gomeowcreations
Facebook - https://www.facebook.com/gomeow.art
Pinterest - https://www.pinterest.com/Gomeowcreations/
Etsy - https://www.etsy.com/shop/GomeowCreations
...
https://www.youtube.com/watch?v=7Z0fC8-ETJw
This is a really cheap & easy upgrade to add Wifi controls, camera and automatic time lapse to just about any FDM printer. I have also designed a better mount for this so you can use it with a tripod.
Beagle Camera:
From Mintion - https://bit.ly/BeagleCamera
From Amazon - https://amzn.to/3nq4MIn
Tripod Mount for Beagle Camera STL - https://bit.ly/BeagleCameraTripodMountSTL
OctoPrint Setup:
OctoPrint Software - https://octoprint.org
Raspberry Pi - https://amzn.to/3ONTMAJ
1080p Webcam https://amzn.to/3yv2kGR
3D printer Filament:
DURAMIC 3D PLA - https://amzn.to/3P9v0uD
MH Quantum Dual-Color PLA - https://bit.ly/QuantumSeriesDual-ColorPLA
MH Build Series Silky PLA - https://bit.ly/BuildSeriesSilkyPLAMatterHackers
FDM 3D Printers:
Flashforge Adventurer 4 - https://bit.ly/Flashforge-Adventurer4
Flashforge Adventurer 4 Lite - https://bit.ly/FlashforgeAdventurer4Lite
ELEGOO NEPTUNE 3 - https://bit.ly/ElegooNeptune3
Ender-3 S1 3D Printer - https://bit.ly/Ender-3-S1-3D-Printer
CR-10 Smart Pro 3D Printer - https://bit.ly/CR-10SmartPro3DPrinter
Resin 3D Printers:
ELEGOO Saturn 8k - https://bit.ly/ElegooSaturn2Printer
ELEGOO Saturn S 4k - https://bit.ly/EleooSaturnS4k
ELEOO Mars 3 Ultra 4k - https://bit.ly/ElegooMars3Ultra4K
Creality Halot One Plus 4k - https://bit.ly/HALOT-ONE-PLUS-4K
ANYCUBIC Photon Mono 4K - https://amzn.to/3zjimo6
Phrozen Sonic Mini 4K - https://amzn.to/3atTgIs
________________________________________________
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that.
https://GomeowCreations.com/tools-and-materials
https://GomeowCreations.com/partners-discount-codes
Note: Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. ??
________________________________________________
Other Ways To Help Support The Channel:
My PATREON ➜ https://patreon.com/GomeowCreations
One time support ➜ https://paypal.me/gomeowcreations
Pick your support ➜ https://bit.ly/HelpSupportGomeowCreations
________________________________________________
Instagram ➜ https://instagram.com/gomeowcreations/
Facebook ➜ https://facebook.com/GomeowCreations/
________________________________________________
#beaglecamera #octoprint #3dprinting #diy #gomeowcreations
...
https://www.youtube.com/watch?v=kzUQgCLfibo
I will show you how to make this ring from scratch along with how to use some cheap tools and some expensive ones as well. If your looking for a more kicked back video check out this one https://youtu.be/YXEdeQzF70w Oh and I also have a list of all the tools I used in the video below!
Big thanks to Ridge for sending me this wallet and supporting the channel! Here’s the site if you
want to check them out! ridge.com/GOMEOW Use Code “GOMEOW” for 10% off your order
----------------------------------------------------------------------------------------------------------
Save $30 on all orders over $100 from https://Pepetools.com with code "MEOW" at checkout
Check out Starbond for all your CA glue needs and used code "GOMEOWCREATIONS15" to save 15% off your order and free shipping http://bit.ly/StarBond
Check out ringsupplies.com to get some expanding ring mandrels and use code "GOMEOWCREATIONS" to save some money on your order http://bit.ly/ExpandingRingMandrels
Here is a list of all the stuff I used it the video:
Extra-Wide LED Lamp with USB Port - https://bit.ly/BenchLampLED
Ring Stretcher - https://bit.ly/RingStretcher
Ring Bender - https://bit.ly/PepeRingBender
Ring Bender Delrin Bit Holder - https://bit.ly/RingBenderDelrinBitHolder
Finger Ring Sizer - https://bit.ly/RingFingerSizer
Steel Mandrel - http://bit.ly/GoldRingMandrel
NANO Jeweler's Saw Blades - https://bit.ly/NANOSawBlades
Rolling Work Table - https://bit.ly/RollingWorkTable
Saw Blade Holder - https://bit.ly/SawBladeHolder3D
MITER FILING BLOCK - https://amzn.to/3hYLmG5
Jeweler's Cast Iron Wooden Bench Pin - https://amzn.to/2ETg6tZ
7-Piece Jewelers Pliers Set - https://amzn.to/2Z9lpw2
Silicone Finger Protectors Covers - https://amzn.to/35a2iWz
Digital Vernier Caliper - https://amzn.to/2FeFutF
Rawhide Mallet - https://amzn.to/2QZphLD
Silicone Rubber Polishing Wheels - https://amzn.to/35b0r3G
Carbon Fiber FABRIC - https://amzn.to/3jRTgBK
Medium CA Glue - http://bit.ly/MediumCAGlue
Starbond Aerosol Accelerator - http://bit.ly/StarbondAccelerator
Scissors for cutting carbon fiber - https://amzn.to/334GoBd
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date:
https://GomeowCreations.com/tools-and-materials
https://GomeowCreations.com/partners-discount-codes
*If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*
----------------------------------------------------------------------------------------------------------
If you would like to directly support the channel you can do so in a few different ways.
1. Like, comment and share my
...
https://www.youtube.com/watch?v=0i1qCncztSE
COMGROW Z110w Laser - https://bit.ly/ComgoZ1Laser10w
________________________________________________
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that.
https://GomeowCreations.com/tools-and-materials
https://GomeowCreations.com/partners-discount-codes
Note: Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. ??
________________________________________________
Other Ways To Help Support The Channel:
My PATREON ➜ https://patreon.com/GomeowCreations
One time support ➜ https://paypal.me/gomeowcreations
________________________________________________
Instagram ➜ https://instagram.com/gomeowcreations/
Facebook ➜ https://facebook.com/GomeowCreations/
________________________________________________
#jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy #gomeowcreations
...
https://www.youtube.com/watch?v=y4HGeffLC44
Watch the full video here : https://youtu.be/nAHbpiUzv-c
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date:
https://GomeowCreations.com/tools-and-materials
https://GomeowCreations.com/partners-discount-codes
*If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*
----------------------------------------------------------------------------------------------------------
If you would like to directly support the channel you can do so in a few different ways.
1. Like, comment and share my videos
2. You can make a one time donation via Paypal of any amount https://www.paypal.me/gomeowcreations
3. You can sign up a monthly donation via my patreon for as little as $1 per month https://www.patreon.com/GomeowCreations
4. You can sign up a monthly donation via my Subscribestar for as little as $1 per month https://www.subscribestar.com/gomeowcreations
5. Just watching my videos helps out too and I'm happy to see that I have been able to help some may people get into jewelry making.
#shorts
#Labradorite #bezelsetting #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy #gomeowcreations
...
https://www.youtube.com/watch?v=QLDvPFJxJh8
Watch the full video here :
Everything You Need to Know to Make Spoon Rings Like A Pro - https://youtu.be/CMa0_Xktf7k
Here is a full list of the tools I used in this video:
Superior Ring Bending Tool - https://bit.ly/PepeRingBender
Steel Mandrel Gold Standard - http://bit.ly/GoldRingMandrel
Finger Ring Sizer Gold Standard - https://bit.ly/RingFingerSizer
Steel Mandrel and Finger Ring Sizer Gold Standard - https://amzn.to/3j4VfTO
Silver Acid Testing Kit - https://amzn.to/36nuCof
NANO Jeweler's Saw Blades - https://bit.ly/NANOSawBlades
Haymaker Jewelers Saw Frame - https://bit.ly/HaymakerSawFrame
Haymaker Jewelers Saw Frame (Amazon) - https://amzn.to/36sh76R
Cheap Jeweler's Saw Frame - https://amzn.to/2NGntsv
Deluxe Rawhide Mallet - https://amzn.to/2MmrPVx
Liver of Sulphur Gel - https://amzn.to/3tbo6KS
GRS Bench Pin - https://amzn.to/3crB4yj
GRS Fixed Mounting Plate - https://amzn.to/39ArxTU
Cheap Clamp on Bench Pin - https://amzn.to/2MDlULt
Better Bench Pin and Ring Mandrel kit - https://amzn.to/2NMX6kJ
Foredom FlexShaft Polishing Setup - http://bit.ly/K2230
Check FlexShaft for Polishing - https://amzn.to/3teQTy6
Polishing Master Kit - https://bit.ly/PolishingMasterKit
Polishing Buffing Wheel Set - https://amzn.to/3pyh4O8
Polishing Compound - https://amzn.to/3akVwyg
Single Spindle Polishing Machine - https://bit.ly/SingleSpindlePolishingMachine
Cheap Chinese Bench Polishing Machine - https://amzn.to/39eq9WR
4" Buffing Polishing Wheel Kit - https://amzn.to/3of0kdn
Guard-Tex Finger Safety Tape - https://amzn.to/39cBTc9
Silicone Finger Protectors - https://amzn.to/3o8wS8Z
Round Plier - https://amzn.to/2MmtfiP
Ring-Bending Pliers - https://amzn.to/3r8f1AY
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date:
https://GomeowCreations.com/tools-and-materials
https://GomeowCreations.com/partners-discount-codes
*If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*
----------------------------------------------------------------------------------------------------------
If you would like to directly support the channel you can do so in a few different ways.
1. Like, comment and share my videos
2. You can make a one time donation via Paypal of any amount https://www.paypal.me/gomeowcreations
3. You can sign up a monthly donation via my patreon for as little as $1 per month https://www.patreon.com/GomeowCreations
4. You can sign up a monthly donation via my Subscribestar for as little as $1 per month https://www.subscribestar.com/gomeowcreations
5. Just watching my videos help
...
https://www.youtube.com/watch?v=ZpMwNNGjTWg
Check out this new 3D printer for Elegoo. The Neptune 3 Pro is basically very nicely upgraded Neptune 3 with a direct drive, dual Z lead screws and a better auto bed leveling system.
Elegoo Neptune 3 Pro - https://bit.ly/ElegooNeptune3Pro
Elegoo Neptune 3 - https://bit.ly/ElegooNeptune3
Filament:
TECSONAR Tricolor PLA - https://amzn.to/3H79d5N
PolyLite Silk PLA Blue - https://bit.ly/PolyLiteSilkPLABlue
PolyTerra Marble PLA - https://bit.ly/PolyTerraMarblePLA
PolyFlex TPU 95 - https://bit.ly/PolyFlex-TPU-95
Free 3D Files:
Articulated Axolotl - https://www.printables.com/model/217417-articulated-axolotl-multicolor-remix/files
Ring Holder Jewelry Organizer - https://www.myminifactory.com/object/3d-print-ring-holder-jewelry-organizer-147505
3D Scanning Tools:
RevoPoint MINI - https://bit.ly/RevopointMini
RevoPoint Pop2 - https://bit.ly/Pop23dScanner
CR-Scan Lizard 3D Scanner - https://bit.ly/CR-Scan-Lizard-3D-Scanner
3D Scanning Spray - https://bit.ly/AESUB-3D-SCANNING-SPRAY
MARKERS FOR 3D SCANNING - https://bit.ly/MARKERS-FOR-3D-SCANNING
________________________________________________
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that.
https://GomeowCreations.com/tools-and-materials
https://GomeowCreations.com/partners-discount-codes
Note: Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. ??
________________________________________________
Other Ways To Help Support The Channel:
My PATREON ➜ https://patreon.com/GomeowCreations
One time support ➜ https://paypal.me/gomeowcreations
________________________________________________
Instagram ➜ https://instagram.com/gomeowcreations/
Facebook ➜ https://facebook.com/GomeowCreations/
________________________________________________
#elegoo #elegooneptune3 #3dprinting #diy #gomeowcreations
...
https://www.youtube.com/watch?v=y-eXbt8c1-g
Check out the full video here: https://youtu.be/5EdXcZEhXtk
Tools & Materials list:
FRETZ Spinner Ring Maker - http://bit.ly/SpinnerRingMakerFRETZ
FRETZ Stamping Hammer - http://bit.ly/FRETZ-StampingHammer
FRETZ Starter Hammer Set - http://bit.ly/FRETZ-StarterHammerSet
2lb Brass-Head Mallet- https://bit.ly/2lbBrassMallet
Steel Mandrel Gold Standard - http://bit.ly/GoldRingMandrel
Finger Ring Sizer Gold Standard - https://bit.ly/RingFingerSizer
Ring Stretcher - https://bit.ly/RingStretcher
Haymaker Saw Frame - https://bit.ly/HaymakerSawFrame
NANO Jeweler's Saw Blades - https://bit.ly/NANOSawBlades
Polishing Master Kit - https://bit.ly/PolishingMasterKit
Foredom k.2230 - http://bit.ly/K2230
Basic Smith Little Torch Five Tips - https://bit.ly/SmithLittleTorch5tips
Premium Bench Block 6" x 6" - http://bit.ly/PremiumBenchBlock
Copper Sheet (Various Sizes) - https://bit.ly/CopperSheets
16 Ga Solid Brass Wire - https://amzn.to/38gE7r2
Tripod Soldering - https://amzn.to/3exo4pK
Bench Pin and Anvil - https://amzn.to/2U2nsiM
Heavy Gauge Mesh Screen - https://amzn.to/3la9xD1
Hard Charcoal Block - https://amzn.to/3l8nIID
Handy Flux - https://amzn.to/3l73X4m
Third Hand Plier/Tweezers - https://amzn.to/36gea8x
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date:
https://GomeowCreations.com/tools-and-materials
https://GomeowCreations.com/partners-discount-codes
*If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*
----------------------------------------------------------------------------------------------------------
If you would like to directly support the channel you can do so in a few different ways.
1. Like, comment and share my videos
2. You can make a one time donation via Paypal of any amount https://www.paypal.me/gomeowcreations
3. You can sign up a monthly donation via my patreon for as little as $1 per month https://www.patreon.com/GomeowCreations
4. You can sign up a monthly donation via my Subscribestar for as little as $1 per month https://www.subscribestar.com/gomeowcreations
5. Just watching my videos helps out too and I'm happy to see that I have been able to help some may people get into jewelry making.
#shorts #spinnerring #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy #gomeowcreations
...
https://www.youtube.com/watch?v=BsG1W5-N7nk